Enzyme catalyzed durable and authentic oriental lacquer: a natural microgel-printable coating by polysaccharide–glycoprotein–phenolic lipid complexes

The chemistry and technology of oriental lacquer, proof of long-term durability by a laboratory test, and morphological features of the closely packed shell (polysaccharides–glycoproteins)–core (polymerized urushiol) microgel particles, which are chiefly responsible for degradation due to efflorescence outdoors, are described. The dimerization mechanism of urushiol was demonstrated by separation of over 20 urushiol dimer derivatives. Physiological dimerization of urushiol in the lacquer is very much influenced by the humidity in drying, and the interaction of semiquinone radicals with metal ions, hydrophilic polysaccharides and amphipathic glycoproteins contained in the lacquer. A mechanism for renewable oriental lacquer is proposed, involving harmony of technology and nature within the lacquer tree plantations in south-east Asia. A brief review of studies of lacquer chemistry and synthetic coatings is given.     

The Effect of Moisture Content in Epoxy Film Adhesives on their Performance. III: Bulk Properties

Humidity absorbed by epoxy film adhesives during low temperature storage or exposure to atmosphere may result in reversible changes and irreversible modifications. Vacuum treatment may partially remedy the reversible changes. The consequences of vacuum drying are manifested in enhancement of both the peel and shear properties of bonded joints (Part I and Part II of this series of papers) and the thermal, physical and mechanical properties of the bulk adhesive, characterized in the present study.

Experimental results have shown that the bulk properties of structural epoxy based adhesives are highly correlated with the aging processes caused by water absorption in the prepolymerized adhesive. Applying the vacuum process is harmful to fresh unaged adhesive due to devolatization of low molecular species of the film adhesive.

The characterization of bulk properties for the purpose of following the aging and recovery processes is advantageous, since the bulk is independent of geometrical and interfacial effects which dominate in the case of property evaluation of the adhesive in a bonded joint.     

High catalytic activity of PdOx/MnO2 for CO oxidation and importance of oxidation state of Mn

PdO_x/MnO₂ has been examined as a catalyst for CO oxidation using a conventional flow reactor at reaction temperatures between 50 and 150°C. In the reaction conditions of GHSV (gashourlyspacevelocity) of 1.22 × 10⁵/h and CO concentration of 2000 ppm, PdO_x/MnO₂ showed higher catalytic activity compared with PdO_x/Mn₂O₃, which had been previously reported as an effective catalyst due to the cooperative action of Pd and Mn₂O₃ for this reaction. The reason for higher activity of PdO_x/MnO₂ than PdO_x/Mn₂O₃ has been investigated using TPR (temperatureprogrammed reduction) and XPS studies. TPR showed that PdO_x/MnO₂ could be reduced by CO at much lower temperature than PdO_x/Mn₂O₃. During the experiment of reduction and oxidation, XPS showed that the valence of Mn in the PdO_x/MnO₂ was between 4+ and 3+, which is higher than that of Mn in the PdO_x/Mn₂O₃ catalyst of which the valence has been reported to be between 3+ and 2+. It is known that in this catalyst system the support supplies oxygen onto Pd, where the oxidation occurs with adsorbed CO, and the ability of the support to provide oxygen improves the performance of the catalyst. Therefore, it was concluded that the readiness of MnO₂ to be reduced with maintaining a higher oxidation state showed higher CO oxidation activity than Mn₂O₃ as support for PdO_x.     

PVC╱NBR╱BR三元共混弹性体的制备

采用结合丙烯腈含量为26％的NBR、分子量适中的悬浮法Ⅲ型PVC和BR共混,制得了综合性能较PVC/NBR并用胶优异的弹性体。优选的工艺条件为:PVC/NBR/BR=30/60/10(质量比);补强剂选用炭黑40份,超细碳酸钙50份,轻质碳酸钙20份;硫化体系选用过氧化物加少量硫磺;混炼温度为140—170℃,混炼时间为10—15min。通过电子显微镜和动态力学分析,弹性体存在两个T,PVC为分散相,橡胶为连续相。     

Influence of processing on ethylene propylene block copolymers (II): Fracture behavior

The present work investigates the relationships between the microstructural state and fracture properties in commercial polypropylene‐based materials. In this case an isopolypropylene homopolymer and three ethylene propylene block copolymers (EPBC) with different ethylene content (EC) have been studied. A variety of morphologies were obtained by a combination of several processing methods (injection molding, injection molding‐annealing, and compression molding) and thickness. Fracture behavior of deeply double‐edged notched specimens was evaluated by scanning electron microscopy (SEM) and by the essential work of fracture (EWF) method, analyzing the influence of processing, thickness (t), EC, and orientation respect to melt flow direction (MD and TD). The testing direction and EC are the most relevant variables that affect the ability of the crack tip to deform plastically during the crack propagation, determining the final fracture behavior. The fracture parameters obtained with the EWF method, specific EWF, w_e, and plastic item, βw_p, have proved to be very sensitive to the processing induced morphology, finding interesting relationships between such morphologies (characterized by crystallinity index, orientation level, and skin/core ratio) and the fracture parameters of the plaques. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 2714–2724, 2006     

Effect of fatty acids on the strain‐induced crystallization of natural rubber detected by tear energy measurements

The strain‐induced crystallization of natural rubber (NR) was investigated by the measurement of the tear energy of a crosslinked blend consisting of NR and noncrystalline styrene–butadiene rubber (SBR). When NR was dispersed into the SBR matrix, the tear energy of SBR increased at various temperatures and tear rates. After the application of the principle of time–temperature superposition to the tear energy according to the Williams–Landel–Ferry equation, two distinct curves were found for the NR/SBR blend with respect to the reduced tear rate, despite the fact that the tear energy of SBR or the SBR/SBR blend gave its own single composite curve. When the fatty acid in the NR/SBR blend was removed by acetone extraction, the tear energy of the blend drew a single composite curve. The conversion of the two curves into the single composite curve for the NR/SBR blend suggested that the tear energy depended on the strain‐induced crystallization of NR dispersed in the SBR matrix, which was suppressed by the removal of the fatty acid. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 98: 613–619, 2005     

Simulation of carbon nanotube based p-n junction diodes

Taking advantage of the unique characteristics of an ambipolar carbon nanotube field effect transistor (CNTFET), a ‘p-n junction’ is simulated along the single-walled carbon nanotube channel using two separate gates close to the source and drain of the CNTFET, respectively. The current-voltage characteristics of the double-gated CNTFET are calculated using a semiclassical method based on the Schottky barrier field effect transistor mechanism. The calculation results show a good rectification performance of the p-n junction.     

Mechanical properties and structures of dicyanate–clay nanocomposites

Dicyanate–clay nanocomposites comprising a dicyanate resin and a type of organically modified clay were prepared and characterized, and their thermomechanical properties were investigated. The organically modified clay had silicate layers of nanometer size intercalated with an organic modifier, which improved the compatibility between the clay and organic materials, such as dicyanate resins. Dynamic mechanical analysis was performed to investigate the thermomechanical properties of the dicyanate–clay nanocomposites containing various amounts of the clay. The storage modulus of the nanocomposites below their glass‐transition temperatures slightly increased with increasing clay content. The glass‐transition temperature of the dicyanate–clay nanocomposites increased with increasing clay content. The nanostructures of the dicyanate–clay nanocomposites were characterized by transmission electron microscopy and X‐ray diffraction analysis. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 2629–2633, 2003     

掺锶羟基磷灰石及其在口腔保健领域中的应用

主要综述了掺锶羟基磷灰石的生物特性和制备方法,以金属锶元素取代羟基磷灰石中的部分钙元素进行改性,可得到掺锶羟基磷灰石,掺锶后改善和提高了羟基磷灰石的结晶性、溶解性、降解性和机械性能,并增强生物相容性。详细讨论了掺锶羟基磷灰石在口腔保健领域中的功效及作用,指出了掺锶羟基磷灰石在口腔保健用品中具有广阔的应用前景。     

Polysulphone and poly(phenylene sulphide) blends: 1. Thermal characterization and phase morphology

The phase behaviour and morphology of injection moulded specimens of polysulphone (PSF) and poly(phenylene sulphide) (PPS) blends were studied by differential scanning calorimetry (d.s.c.), dynamical mechanical thermal analysis (d.m.t.a.) and transmission electron microscopy (TEM). The blends are phase separated regardless of the blend composition as revealed by d.s.c., d.m.t.a. and TEM. Upon annealing at 160°C for 2 h, d.m.t.a. results indicate that the PPS phase remains in the amorphous state at compositions <10%. At compositions between 20 and 35%, the PPS appears to be dispersed in a mixed mode of amorphous and crystalline domains. Above 35% the PPS phase appears to become fully crystallized upon annealing of the blends. At 10% PPS, TEM results showed 35–200 nm size dispersion both in the as-moulded and in the annealed specimens. At 20% the PPS phase varied widely in size, from 35 nm to tens of micrometres but remained as an included phase. TEM also revealed a compound morphology of the included phase at a composition of 50 wt% of each component.