双活塞杆油缸在注塑机中的新应用

采用双活塞杆油缸注射装置，开发了一种新型注塑成型机，使用效果表明：采用该装置能提高功效，降低成本，节约能源。     

小型储气罐火灾工况数值模拟分析

以某输气管线气液联动执行机构中的储气罐为例,利用Ansys Fluent软件建立同比例三维模型,模拟火灾工况下,外部热量不断输入,罐内压力和罐体温度随时间的变化情况。利用Aspen Hysys软件模拟计算该小型储气罐在火灾工况下安全泄放所需的最小安全阀口径。结果表明,当钢制储气罐外部发生火灾时,罐体温度和罐内压力急剧升高,在很短的时间内就能达到储气罐坍塌温度和储气罐设计压力;达到钢制储气罐坍塌温度的时间滞后于达到储气罐设计压力的时间;从安全的角度,设置安全阀可安全有效泄放气体,即使储气罐发生坍塌,也有助于降低事故发生的危害程度;确定的安全阀最小口径为0.03 cm²,建议选型的安全阀口径不低于0.05 cm²。     

超声波压力检测中回波搜索算法

通过对超声波压力测量中回波信号特征的分析，提出了回波自动搜索算法。该方法把快速傅立叶变换方法和小波多分辨率信号分解相结合，精确地检测出回波的包络信号，从而准确地搜索到回波，为后续的压力信号处理及提高压力测量的精度奠定了基础。     

耐腐蚀高压柱塞泵用新型双相不锈钢的研究

叙述了新型双相不锈钢－ＷＳＤ钢的组织及其耐蚀性能。试验结果表明，ＷＳＤ钢在氯化物介显示出优异耐蚀性能，其抗点蚀性能远超过Ｃｒ１３，１８－８Ｔｉ，３１６Ｌ等钢种，达到国外Ａｌ－６Ｘ，ＳＡＦ２２０５等钢种的水平。     

纺机织轴边盘的金属型低压铸造

介绍了采用金属型低压铸造生产边盘所涉及的设备、模具、工艺 ,并对产品质量和经济效益进行了分析     

浅谈气力提升系统的设计

阐述了气力提升系统的组成、原理、选择原则和设计过程。并对气力提升系统与传统提升装置进行了分析、比较,指出气力提升系统具有设备性能稳定、耗能小等优点,有着很好的应用前景,值得推广。     

压力容器无损检测 --长管拖车气瓶的无损检测技术

长管拖车是新类型的压力容器,作为一种高效运输工具,在许多领域应用广泛。综述了国内外拖车气瓶在制造和使用过程采用的各种无损检测方法及标准。方法包括超声、磁粉、渗透和声发射检测等。并介绍了各种无损检测方法的特点。     

磷酸萃取系统中的测量与控制

磷酸萃取是6万t磷铵料浆法流程的关键之一，重要的控制参数有矿浆、硫酸、返回淡磷酸的加入量及萃取槽的液位、压力、温度等。     

OPTIMIZATION OF PRESSURE SWING ADSORPTION EQUIPMENT PART II OPTIMIZATION OF TWO BED OXYGEN GENERATORS

Local equilibrium model described in Part I is used to stimulate both, the steady state operation conditions and transient regime after the start of PSA equipment. The effect of axial dispersion, adsorption isotherm nonlinearity and high pressure level is simulated. On the basis of numerical analysis, the operation of a classical two-bed oxygen generator is compared with two configurations having pressure equalizing step. The optimization strategy of the given PSA equipment has been proposed and the procedure is demonstrated on an example. The scaling-up condition for PSA equipments which can be described by local equilibrium model has been proposed on the basis of the theoretical analysis.     

Cure kinetics and shrinkage model for epoxy-amine systems

Manufacture of most of epoxy resins implies that cure needs to be carried out under pressure. Due to the significance of knowing the influence of the pressure factor in cure kinetics, cure shrinkage of a stoichiometric epoxy-amine system was measured using a pressure-volume-temperature (PVT) analyzer. Recording the specific volume change in the range of temperature from 100 to 180 °C and a pressure of 200 bar we could model the cure kinetics. The Runge-Kutta method was applied to obtain the kinetic constants of the cure reaction. In addition, using the differential scanning calorimeter (DSC) for measurements of 1 bar and the PVT analyzer for pressures of 200, 400, and 600 bar, we also model the kinetic constants as a function of pressure. The results obtained show that the effect of the temperature on the kinetic constants is higher than the effect of pressure. Therefore, both PVT and DSC are complementary techniques to describe the full range of cure kinetic process of epoxy mixtures.