Isochoric p-ρ-T Measurements on 1,1-Difluoroethane (R152a) from 158 to 400 K and 1,1,1-Trifluoroethane (R143a) from 166 to 400 K at Pressures to 35 MPa

The p--T relationships have been measured for 1,1-difluoroethane (R152a) and 1,1,1-trifluoroethane (R143a) by an isochoric method with gravimetric determinations of the amount of substance. Temperatures ranged from 158 to 400 K for R152a and from 166 to 400 K for R143a, while pressures were up to 35 MPa. Measurements were conducted on compressed liquid samples. Determinations of saturated liquid densities were made by extrapolating each isochore to the vapor pressure, and determining the temperature and density at the intersection. Published p--T data are in good agreement with this study. For the p--T apparatus, the uncertainty of the temperature is ±0.03 K, and for pressure it is ±0.01% at p>3 MPa and ±0.05% at p<3 MPa. The principal source of uncertainty is the cell volume (28.5 cm³), which has a standard uncertainty of ±0.003 cm³. When all components of experimental uncertainty are considered, the expanded relative uncertainty (with a coverage factor k=2 and thus a two-standard deviation estimate) of the density measurements is estimated to be ±0.05%.     

A comparative study of two techniques for improving power‐handling capability of CMOS T/R switches

This article proposes an asymmetric topology for transmit/receive (T/R) switches and more importantly presents a comparative study of both LC‐tuned and resistive body‐floating techniques for improving the power‐handling capability of the T/R switches in the same 0.18‐μm triple‐well CMOS. It is shown from simulations and measurements that the switches adopting either technique achieve comparable performances. For instance, the switch employing the LC‐tuned body‐floating technique exhibits insertion loss of 1.5 dB, isolation of 23.5 dB, and power‐handling capability of 22.5 dBm at 5.2 GHz, whereas the switch using the resistive body‐floating technique exhibits insertion loss of 1.3 dB, isolation of 24 dB, and power‐handling capability of 22.2 dBm, respectively. Therefore, one can conclude that the asymmetric topology with the resistive body‐floating technique is more suitable for designing T/R switches for wireless local area network applications as it consumes smaller silicon area. © 2010 Wiley Periodicals, Inc. Int J RF and Microwave CAE, 2010.     

The "hidden observer" phenomenon in hypnosis: Some additional findings.

23 highly hypnotizable undergraduates (Harvard Group Scale of Hypnotic Susceptibility) underwent 2 specially constructed 7-item hypnotic inductions. Over the 14 items, the main finding was of a relationship between E. R. Hilgard's (1973, 1977, 1979) "hidden observer" effect and 2 aspects of hypnotic age regression. Ss reporting a hidden observer experienced duality during regression to age 5, in which they were aware of being both adult and child. When asked to write a complex sentence, most did so, usually without spelling errors. The Ss not reporting this effect experienced quasi-lateral age regression in which they had the exclusive feeling of being 5 yrs old, with no sense of an adult identity. Most of these Ss were unable to write the same complex sentence when requested to during age regression. The study replicated Hilgard's finding of the hidden observer phenomenon in terms of its incidence and obtained similar verbal reports from Ss experiencing it. At the same time, the results suggest that a neodissociation account of hypnosis may need some modifications to accommodate these additional findings. (27 ref) (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

The recovery and recrystallization of cold rolled V-W-Ti alloys

Several V-W-Ti alloys with about 50% reduction in thickness by cold rolling were isochronally annealed at temperatures from 100 to 1100 °C. Hardness was measured after the annealing. By comparison with V4Cr4Ti and V4Ti alloys, the V6WTi alloy was found to begin recovery at a temperature about 100 °C higher, while the full recrystallization temperature was around 900 °C for all of the alloys. Hardness decreased successively above 500 °C in V8W, as is the case in pure V. Impurity induced hardening was observed around 300 °C only in the alloys without Ti. Precipitation and the interaction between interstitial impurities and dislocations were supposed to be the main contributors to the different recovery and recrystallization behaviors of the alloys.     

岷江试验堆Q15孔道中子谱测量试验的研究

为了确定岷江试验堆(简称MJTR)堆芯铍反射层内中子能量E >1.0MeV的快中子注量率,采用一组中子探测片测量了岷江试验堆内第一层铍反射层外Q15孔道内的快中子注量率谱,并由测量谱求得各阈能探测片的快中子反应的谱平均截面和该孔道测量点位置的快中子注量率。结果表明,铍反射层内快中子(E>1.0MeV)注量率为1.985×1012 cm-2·s-1,MJTR每运行一段,铍反射层内快中子(E>1.0MeV)积分注量最大可达1.54×1018cm-2。通过本次试验研究,为更好的开发利用MJTR提供了试验依据。     

生长抑素及其类似物的标记技术的发展

生长抑素受体显像剂是临床上应用最为普遍的放射性多肽类受体显像剂。用多种放射性同位素^111In、^90Y、^6Ga、^68Ga、^64Cu或是用^99Tc^m、^188Re以及卤族同位素^123I、^18F等对奥曲肽及其类似物进行标记得到的放射性多肽药物，已广泛用于临床显像。介绍了生长抑素类似物及标记技术的发展，对目前临床上比较成熟的生长抑素类显像剂做了综述和比较。同时介绍了目前在SST类似物开发领域及生物行为研究领域中的最新发展动态。     

Q345C低合金高强度结构钢板的试制

介绍采用氧气顶吹转炉→吹氩喂丝→板坯连铸→控制轧制生产Q345C低合金高强度结构钢板的生产工艺。通过对化学成分的合理设计及制订适合该厂冶炼、连铸、轧制的工艺，采取微合金化和控轧控冷相结合的有效技术措施，提高钢板的综合性能，特别是低温冲击韧性。生产的Q345C钢板，其产品质量完全符合GB／T1591—94标准要求。     

新型三氮唑化合物在H_2SO_4中对Q235钢的缓蚀作用

钢材酸洗时添加缓蚀剂是一种有效、经济的防腐蚀方法,研究缓蚀剂对其作用机理,发展和完善缓蚀剂理论,已成为研究热点.通过失重试验、动电位极化曲线、交流阻抗谱测试及扫描电镜(SEM)方法研究了新型三氮唑化合物1-(4-氟基苯)-3-[4-(1,2,4-三氮唑-1-甲氧基)-苯]-丙烯缓蚀剂(FTPP)在0.5mol/,L H2SO4溶液中对Q235钢的缓蚀作用.结果表明:FTPP对Q235钢的缓蚀效果与自身浓度有关,在0.5mol/L H2SO4中当其达到10-3 mol/,L时,缓蚀率高达92.8%,能同时抑制腐蚀的阴、阳极反应过程,它是一种混合型缓蚀剂;Q235钢的阻抗值随FTPP浓度增加而增大,FTPP在钢表面的吸附符合Langmuir等温式.     

Extension of the applicable range of the implicit curve-fitting method for refrigerant thermodynamic properties to critical pressure

The method of implicit curve-fitting and explicit-calculation has been used for fast and stable calculations of thermodynamic properties of subcritical refrigerants. In order to extend that method to the critical pressure, a method of sectional implicit curve-fitting and explicit-calculation for refrigerant thermodynamic properties is introduced in this paper. The whole data range is divided into several subsections. The requirements on the continuity of thermodynamic properties and the first order derivative of thermodynamic properties in the intersection points of subsections are indicated, and the methods to meet the requirements are presented. Quadric equations are constructed instead of curve-fitting when no data can be given. With the source data obtained from REFPROP 7.1, explicit fast calculation formulae for thermodynamic properties of R410A, covering the saturated temperature of 213.15–344.51 K and superheat of 0–65 K, are given as an example. The calculation speeds of the formulae of R410A are more than 7000 times faster than those of REFPROP 7.1 while the total mean relative deviation of the fast calculation formulae from REFPROP 7.1 is only 0.04%.