CVD金刚石膜生长过程的Raman分析

采用激光Raman散射分析法对CVD金刚石膜的生长过程进行研究 ,讨论在金刚石膜生长的不同阶段 ,膜内金刚石和非金刚石成分的相对含量及其残余应力的变化情况     

宽带抽运情况下乙醇、丙酮溶液中受激拉曼散射光谱的实验研究

研究了乙醇、丙酮两种拉曼介质在宽带抽运情况下啁啾激光脉冲的受激拉曼散射频谱特性 ,得到的一级Stokes光频谱宽度与抽运光基本相当 ,且具有较高的转换效率 ,从而表明了利用“展宽—受激拉曼散射—压缩”的办法获得波长近 1μm的飞秒级超短脉冲激光信号源的实验方案具有可行性     

用于测量空间温度场的分布式光纤传感器的系统设计

文中首先介绍了喇曼散射，并对分布式光纤温度传感器进行了理论分析，最后着重介绍我们研制的一种能够实际使用的喇曼散射分布式光纤温度传感器系统的设计和应用。     

Films and fibers of oriented single wall nanotubes

As-produced nanotubes form a light, fragile and isotropic soot. Different efforts are made to process nanotubes into macroscopic forms of more practical use and more controlled properties. We briefly review in this paper two methods recently proposed to make films of magnetically aligned nanotubes and fibers by using an electrophoretic method. Preferential orientation of the nanotubes in the plane of the films or along the fiber axis is an important feature of the obtained materials. Then we describe in details a different, spinning like, process for making fibers out of single wall carbon nanotubes. This process consists of dispersing the nanotubes in a surfactant solution, re-condensing the nanotubes in the flow of a polymer solution to form a nanotube mesh, and then collating this mesh to a nanotube fiber. The behaviors of the surfactant-stabilized dispersions, which are also presented, are critical for this process. The degree of nanotubes alignment in dried fibers has been characterized by X-ray scattering. It is found to be smaller than the alignment obtained in the previous materials. However, the processing is simpler and faster and potentially scalable for large-scale production.     

Effect of doping polyacrylic acid with some dopants as studied by different techniques

The molecular weight of polyacrylic acid (PAA) was determined by a viscometric method using NaNO₃ as solvent at 30°C. The specific electric conductivities (σ) of PAA as well as PAA doped with carbon black (CB), chromium oxide (Cr₂O₃), and cupferron with different concentrations (from 0.25 to 1 wt %) were measured at a temperature range 360–400 K. IR spectra of some polymers were determined and it was shown that when PAA was doped with 0.5 wt % CB, a C? O? C band appeared at 775–875 cm^?1. The positron annihilation lifetime (PAL) spectra in PAA doped with the above‐mentioned dopants were measured as a function of their concentrations. It was observed that the short lifetime intensity I₁ decreased, whereas the intermediate lifetime intensity I₂, which is related to the conductivity of the material, increased with increasing the wt % of Cr₂O₃ and cupferron as well as at low concentrations of CB. These results are discussed in terms of the conducting island model. It was found that there were distinct positive relationships between σ and I₂. © 2002 John Wiley & Sons, Inc. J Appl Polym Sci 84: 877–883, 2002; DOI 10.1002/app.10381     

Origin of visible photoluminescence from porous silicon as studied by Raman spectroscopy

In this paper we discuss the different models proposed to explain the visible luminescence in porous silicon (PS). We review our recent photoluminescence and Raman studies on PS as a function of different preparation conditions and isochronal thermal annealing. Our results can be explained by a hybrid model which incorporates both nanostructures for quantum confinement and silicon complexes (such as SiH _x and siloxene) and defects at Si/SiO₂ interfaces as luminescent centres.     

Nd：MgO：LiNbO3晶体的荧光光谱及其双晶体腔内互倍频实验

采用激光感生荧光技术测量了Ｎｄ：ＭｇＯ：ＬｉＮｂＯ３晶体的偏振荧光光谱，简要地说明了Ｎｄ：ＭｇＯ：ＬｉＮｂＯ３双晶体腔内互倍频的基本原理，并在实验中用染料激光作泵浦源实现了其双晶体腔内互倍频运转；得到５４３ｎｍ横模倍频绿光单端输出约ＹＭＷ，腔前泵浦阈值约３８ＭＷ，总转换效率约为１．３％。     

短波长相干光与原子团受激发射

多种原子团及其离子已具有在VUV/XUV波段产生受激发射的能力。本文介绍了产生短波长相干辐射的方法、研究现状、研究方法和原子团的结构与受激发射。     

Microwave plasma enhanced chemical vapor deposition diamond synthesis from high carbon content source

To synthesize diamond films by microwave plasma enhanced chemical vapor deposition (MPECVD), the methane concentration (CH₄/H₂)plays a crucial role. It is well-known that there always exists a critical methane concentration (≤0.6%) only below which a good quality diamond film can be obtained. In this study, however, the phenomena of diamond synthesis resulting from high carbon concentration conditions were observed. The molten metals, e.g., Ag, Cu, were used as the deposition substrates on which crystalline diamonds can be achieved from a methane content of CH₄/H₂≥6% or even from solid carbon sources. These results suggest that there may exist a low methane content boundary layer (<0.6%) in the proximity of molten metal surface on which suitable species, CH, CH⁺, H_α and H_β are composed for the diamond nucleation and growth similar to the condition as in the conventional low methane contents. The molten metal inclines to dissolve other forms of carbonaceous materials other than diamond, and thus keeps a much higher steady supply of carbon atoms that enhances the quality as well as the growth rate of the forming diamonds. Received: 23 June 2001 / Accepted: 23 July 2001