地源热泵的地热能利用方式与工程运用

地源热泵是一种新型的高效、节能、环保的空调系统 ,是我国调整能源利用结构 ,发展利用可再生能源策略的重点推广项目之一。本文介绍了地源热泵的工作原理及四种地热能利用方式。根据笔者的设计经验 ,为地源热泵空调系统的工程设计和推广应用提供了一些设计参数和参考意见     

固液相变蓄能的数学模型和自然对流换热系数的实验研究

引入自然对流换热系数 ,将固液蓄能数学模型简化为仅用能量方程加以描述。并通过实验测得相变过程的实际温度场 ,证明了自然对流固液相变换热的影响不可忽略 ,验证了固液相变界面移动速率随自然对流换热系数的增大而增大的定性关系     

体积-表面淬火中加热温度的自动控制

根据表面-体积淬火奥氏体规范的要求，分析了感应加热过程中温度控制的特点和方式，并介绍了采用红外线光导纤维测温和微机控温技术成功用于体积-表面淬火中透热温度的自动控制。     

ENHANCED RECOVERY OF MEDIUM CRUDE OIL IN HETEROGENEOUS RESERVOIRS USING AIR INJECTION/IN SITU COMBUSTION—HORIZONTAL WELL TECHNOLOGY

A simple 3-D physical model has been developed to investigate the use of in-situ combustion in heterogeneous reservoirs. Gas over-ride phenomena is one of the major causes of instability of combustion process; gas override results in poor sweep efficiency with subsequent low oil recovery. However, the use of horizontal wells in direct line drive arrangement has shown a great deal of combustion stability and propagation by means of controlling gas override This paper has extended the scope of using horizontal wells in direct line drive configuration in heterogeneous reservoirs. Three cases of reservoir heterogeneity were investigated in this study. In the first case, a dual-layer permeability of sand was used (a high permeability layer on top and a low permeability layer on bottom); in the second case, placement of the aforementioned layers was swapped, and in the third case, a high permeability streak was sandwiched between two low permeability layers of fine sand. The results indicated that a stable combustion front has been achieved in the first two cases with a high oil recovery, however the performance of the combustion process markedly deteriorated when a high permeability streak layer was utilised as a result of a severe low temperature oxidation due to oxygen channelling through the streak, with subsequent poor sweep efficiency and in turn low oil recovery. The use of horizontal wells as producers and injectors in a line drive configuration is beneficial and effective for minimising the effect of reservoir heterogeneity to some extent.     

涡流管类比逆流换热器方法的研究

结合Scheper，Lewins和Bejan的理论模型，对涡流管类比逆流换热器模型进行了深入地分析，得出了冷流分量对温度分离效应的函数关系式，为了解涡流管机理和实验中强化涡流管温度分离效应提供了理论依据。     

贵溪冶炼厂闪速炉炉体第二次改造

介绍贵冶闪速炉炉体两次改造 ,炉体冷却元件的设置及设计特点 ,阐明了设置冷却元件必要性及使用的实际效果。     

板式换热器热端跑冷问题的分析及处理

１００００ｍ３／ｈ制氧机板式换热器损坏修复后，热端跑冷严重，氧气取出量不足，制氧机工况恶化，通过分析找出了原因是因某单元氧通道堵塞，并采取了处理措施。     

Influence of heat transfer on anodic oxidation of aluminium

The influence of convective heat transfer on constant current density anodizing of aluminium in sulfuric acid has been examined in a wall-jet electrode reactor. The uniformity of the anodic film thickness is related to the local electrode temperature distribution, which is dependent on the convection. The higher the local temperature, the greater the local oxide thickness. An increased local temperature enhances local field assisted oxide dissolution at the pore bases, and consequently acts to increase the local current density. At relatively high current densities, local features develop on the electrode surface, accompanied by high initial, local temperature rises. The relevance of such local features, limiting useful oxide growth, is considered further.     

Design and characterisation of a close-concentric annular reactor for kinetic studies at high temperatures

A novel annular reactor for kinetic studies at high temperature and flow conditions has been designed to keep eccentricity tolerances below 10%. In a previous work, we have shown that it is very important to keep such low eccentricity values in order to collect reliable kinetic data from this type of reactors. As proposed in this study, a modified reactor with the use of a spacer could guarantee an annular duct with low levels of eccentricity. Manufacturing tolerances or deformation effects giving rise to eccentricity can be significantly minimised when using this apparatus. The reactor has been both experimentally and theoretically characterised. Carbon monoxide oxidation was used as a model reaction under mass-transfer limited conditions revealing an eccentricity of ∼5%. With such small eccentricity levels, a concentric annular form can be assumed in the reactor analysis. Simple 1D or 2D models can therefore be inexpensively used in the evaluation of the kinetic data. Also, prior to the design of the annular reactor, a numerical investigation was carried out to clarify the effects of eccentricity, physical properties of the carrier gas and the annular aspect ratio on mass-transfer limitations. Contrary to expectations, a considerable increase in the fuel mass-diffusivity by carrier gas substitution did not change the mass-transfer rates for cases when eccentricity and aspect ratios were high.     

确定异常高压气藏地质储量和可采储量的新方法

基于文献[1]的定容，封闭，异常高压气藏的物质平衡方程式，提出了确定异常高压气藏原始地质储量，可采储量和采收率的新方法，通过实例的应用和对比表明，提供的新方法是适用的有效的。