Microstructural evidence for short-circuit oxygen diffusion paths in the oxidation of a dilute Ni-Cr alloy

A comparative study of high-temperature oxidation of Ni containing 1 at.% Cr and pure Ni was carried out. Instead of the conventional kinetics study using thermogravimetry, a microlithographic marker experiment was designed. Observation of the markers using cross-sectional TEM and SEM has revealed striking differences in the scale morphology, microstructures, and oxidation mechanisms between pure Ni and the Cr-doped Ni substrates. In particular, the results suggest that a small addition of Cr promotes significant inward transport of oxygen. Marker experiments revealed that NiO grown on pure Ni is wholly attributable to outward-cation diffusion. In contrast, NiO grown on Ni–1 at.% Cr exhibited formation of a substantial inner layer having a submicron grain size, established by the markers to have formed from oxygen ingress. For pure Ni, voids were observed to be distributed only within oxide grains. In contrast, for Ni containing 1 at.% Cr, elongated pores formed extensively along oxide-grain boundaries. Formation of new fine-grain oxide in these pores was observed to have sometimes completely resealed the void. It is, therefore, proposed that the transport of oxygen in the case of oxide scale grown on Ni–1 at.% Cr occurs via voids (pores) formed by vacancy coalescence at the grain boundaries.     

埋弧自动焊在大口径钢卷管焊接上的应用

为把埋弧焊应用在大口径钢卷管焊接上,分析了焊接工艺设计、焊接工装设计和纵缝、环缝焊接的施工要点,经过实际施工验证了这种方法是成功的,效益是高的。     

我国环保产业研究与发展的探讨

在总结我国环保产业研究与发展现状的基础上 ,指出我国环保产业的发展必须得到理论研究的指导 ,并对有关问题进行了深入地探讨。根据我国加入WTO后的环保产业现状 ,预测、分析了将在我国环保产业形成投资热点的几个领域     

Microstructures and mechanical properties of welded Fe-12Cr-20Mn austenitic stainless steel

The effects of welding on the tensile and fatigue properties of fully annealed and cold-worked Fe-12Cr-20Mn austenitic stainless steel were evaluated. Room temperature and 500 °C tensile tests and room temperature cantilever beam fatigue tests were accomplished on specimens that contained autogenous bead-on-plate welds. The tensile and fatigue properties of the fully annealed material were not significantly influenced by welding. The tensile properties of the welded cold-worked material were also not significantly affected by the presence of a weldment. However, welding caused a large reduction of the fatigue life of the cold-worked material. Fatigue cracks preferentially initiated at large Mn-Si inclusions that formed in the fusion zones of the weldments.     

晶化机制与激活能的晶化速率参比法确定

本文根据修正的Kissinger公式提出一种确定非晶材料晶化机制与激活能的最大晶化速率参比法。以Ar_(70)Cu_(30)非晶合金为例,研究了晶化机制与激活能及其与压力的关系。     

强流脉冲离子束表面再制造技术原理与应用

采用TEMP-6型强流脉冲离子束(HIPIB)装置开展了HIPIB表面再制造技术的研发.HIPIB装置主体由高压脉冲电源系统和高功率离子二极管系统组成,通过高压短脉冲在二极管中放电产生阳极等离子体并引出ns级强流离子束.HIPIB辐照材料表面,发生显著的熔融、蒸发和剧烈烧蚀,物质喷射的反冲作用在辐照表面形成由表及里的应力波,导致材料表层强烈的热-力学效应.利用HIPIB与材料表面的相互作用,应用于涡轮叶片表面的清洗维修,可有效去除涡轮叶片基体因高温氧化形成的氧化物,伴随表层的重熔将叶片基体表面微观缺陷焊合,获得了光滑、平整的涡轮叶片修复表面.实现了HIPIB辐照在涡轮叶片表面再制造方面的应用.     

基于图形化编程语言LabVIEW的虚拟仪器开发

本文介绍了虚拟仪器的概念，组成特征和图形化编程语言LabVIEW，并用LabVIEW开发了位移测试和系统静态精度测试系统。     

离散型制造企业进销存信息管理系统的设计与实现

针对某离散制造企业的业务流程，采用C／S（Client／Server）结构模式，使用VB6．0作为前台开发工具，SQL Server2000做后台数据库，开发了企业进销存管理系统。该系统以企业管理的计划和控制职能为核心，提供了采购、库管、销售、计划等实用而丰富的管理功能，可以对企业的经营管理活动分析、预测。文章介绍了系统的建模、设计和实现过程。     

深冷处理与工模具的耐磨性

热处理后的金属材料再经低落曙处理，其力学能明显提高，尤其是高碳高合金工模具钢的耐磨性提高特别显著。本文着重研究了应用面较广的Ｗ６Ｍｏ５Ｃｒ４Ｖ２钢的处理工艺制度，组织性能及其磨损机理。     

Fe3Al氢脆机理的研究

用余氏理论计算了氢对Ｆｅ３Ａｌ金属间化合物键结构、键能和电子分布的影响，分析发现，Ｆｅ３Ａｌ的氢脆是由于氢原子溶入扣引起Ｆｅ，Ａｌ原子状态变化。使晶体内晶格电子数大大减少，导致晶体局域金属性减弱，并构成具有严重各向异性的键络的结果。同时得出，氢在Ｆｅ３Ａｌ中占据间隙位置。