Modelling of the extraction equilibrium of zinc from chloride solutions with tri-n-octylphosphine oxide

The extraction of zinc from chloride solutions with tri-n-octylphosphine oxide (TOPO) dissolved in benzene has been thermodynamically studied based on the law of mass action. A model employing the simplified Pitzer equations for stoichiometric activity coefficient estimations is found to be effective for the explanation and prediction of the distribution data, and the thermodynamic extraction constant is determined as log K_et = 5.16 ± 0.11 at 20°C.     

α-Fe_2O_3(SO_4~(2-),Sn)气敏电阻的温度响应特性

在气敏温度区域内研究了α-Fe_2O_3(SO_4~(2-),Sn)材料的电阻-温度特性,认为表面结构的变化导致温度特性出现峰值并呈现气敏性。可利用空气中电阻温度特性提供的信息改性或发现新的气敏材料。     

A double-layer current conduction model for high-κ gate dielectric materials with interfacial oxide or silicate layer

The current-voltage (I-V) characteristics of metal-oxide-semiconductor (MOS) structures with hafnium oxide as the gate dielectric film were studied. Sharp shifts from a low-voltage ohmic regime to a tunneling conduction were observed in the high-voltage range. The paper demonstrates that this behavior can be described very well with a double-layer dielectric model. Excellent fittings of the experimental curves were obtained and the related key structural and physical parameters were obtained. The model fitting further suggests the optimal annealing conditions for preparing the hafnium oxide films.     

影响喷气燃料与橡胶相容性的因素

采用几种具有不同初始物理性能及不同丙烯腈含量、不同硫化剂和硫化程度的丁腈橡胶，考察了其配方和物理性能对采用不同工艺条件生产的喷气燃料的相容性。结果表明，喷气燃料与橡胶的相容性不仅与喷气燃料的加工工艺有关，而且与橡胶的组成及其制备工艺有关。采用非加氢工艺生产的喷气燃料与橡胶的相容性好于采用加氢工艺(特别是加氢裂化工艺)生产的喷气燃料。橡胶材料的初始力学性能的好坏并不完全决定其与喷气燃料相容性的好坏，橡胶材料的耐过氧化物侵蚀能力才是影响相容性好坏的主要因素。橡胶的组成和其制备工艺决定了橡胶在喷气燃料中萃取物的数量和组成，不同萃取物的综合作用给相容性带来不同程度的影响。用硫作硫化剂的橡胶虽然原始强度低于用过氧化物作硫化剂的橡胶，但前者与喷气燃料的相容性却远好于后者。     

Effect of temperature on methyl radical generation over Sr/La2O3 catalysts

The role of gas phase CH₃ radicals in the oxidative coupling of CH₄ over 1 wt% Sr/La₂O₃ is supported by the observations that (i) this is a very effective catalyst for the generation of CH₃ · radicals and (ii) the concentration of CH₃ · radicals increases with temperature over the range of 450 °C–800 °C.     

Photodegradation mechanism and stabilization of polyphenylene oxide and rigid‐rod polymers

Poly(2,4‐dimethyl‐1,4‐phenylene oxide) (PPO), poly(benzo[1,2‐d:5,4‐d′]bisoxazole‐2,6‐diyl‐1,4‐phenylene) (PBO) and poly(benzo[1,2‐d:4,5‐d′]bisthiazole‐2,6‐diyl‐1,4‐phenylene) (PBZT), which are polymers with extended conjugated structures, undergo a self‐sensitized photo‐induced electron‐transfer reaction. A second component is not required. This article presents many similar observations on these polymers when they are exposed to light and evidence to support the proposed photo‐induced electron‐transfer mechanism. Methods to stabilize these polymers against photo‐oxidation are also described. Workers investigating other conjugated polymeric systems may find the experimental methods, observations and polymer stabilization approaches discussed in this review useful. Copyright © 2005 Society of Chemical Industry     

液晶分子附着能和盒间隙对响应时间的影响

通过理论分析和实验研究液晶分子附着能和液晶盒间隙对响应时间(τ0)的影响。用液晶盒有效间隙法和表面动力学方程法两种方法推出分析公式,由这两种方法推出的结果是一致的。实验数据与简化方程τ0-dx基本拟合(其中d是液晶盒的间隙,x是指数)。在两种极端的(极大或极小)附着能极限下,指数x分别接近2和1。这个结论有助于优化液晶显示器件的应用。     

FEM model of the ohmic resistance of IP-SOFCs

In the present work, the ohmic resistance of an integrated planar-SOFC (IP-SOFC) has been evaluated by developing a model whose equations have been solved numerically through an FEM method. The model allows to estimate the distribution of voltage and current density in the cell. A comparison between simulated and experimental data of area specific resistance is reported, which shows satisfactory agreement. The mathematical model has also been used to carry out some parametric studies for optimisation purposes. Indeed, a reduction in cell pitch length and an increase in electrode thickness are predicted to lead to a reduction in ohmic losses in IP-SOFCs.     

Synthesis and applications of heterobifunctional poly(ethylene oxide) oligomers

Poly(ethylene oxide) (PEO) oligomers are employed extensively in pharmaceutical and biomedical arenas mainly due to their excellent physical and biological properties, including solubility in water and organic solvents, lack of toxicity, and absence of immunogenicity. PEO can be chemically modified and reacted with, or adsorbed onto, other molecules and surfaces. Sophisticated applications for PEO have increased the demand for PEO oligomers with tailored functionalities, and heterobifunctional PEOs are often needed. This review discusses the synthesis and applications of heterobifunctional PEO oligomers possessing amine, carboxylate, thiol, and maleimide functional groups.