Electron beam evaporated carbon nanotube dispersed SnO2 thin film gas sensor

Carbon nanotube (CNT) is a useful material for gas-sensing applications because of its high surface to volume ratio structure. In this work, multi-wall CNTs are incorporated into tin oxide thin film by means of powder mixing and electron beam evaporation and the enhancement of gas-sensing properties is presented. The CNTs were combined with SnO₂powder with varying concentration in the range of 0.25–5% by weight and electron beam evaporated onto glass substrates. From AFM and TEM characterization, CNT inclusion in SnO₂thin film results in the production of circular cone protrusions of CNT clusters or single tube coated with SnO₂layer. Experimental results indicate that the sensitivity to ethanol of SnO₂thin film increases by the factors of 3 to 7, and the response time and recovery time were reduced by the factors of 2 or more with CNT inclusion. However, if the CNT concentration is too high, the sensitivity is decreased. Moreover, the CNT doped film can operate with good sensitivity and stability at a relatively low temperature of 250–300^∘C. The improved gas-sensing properties should be attributed to the increasing of surface adsorption area of metal oxide produced by CNT protrusion.     

暗室中的几种废品处理方法

本文介绍了暗室操作中产生的几种废品处理方法。采用正确的废品处理方法可以节约资源，减少环境污染。     

Investigation of failure mechanism and modification for film-lubricated precise angular-contact ball bearing

This paper describes an experimental investigation into the performance and lubrication failure mechanism of precise angular-contact ball bearings treated with MoS₂-sputtered film, etc. As an important executive component of various spacecrafts, there are some strict requirements on the lubrication performance of angular-contact ball bearing, but the related experimental data are rare to see in literatures. In this experiment, the lubrication performances of MoS₂-sputtered ball bearing pairs were evaluated by using lifetime test as a main method, and the topographies and compositions of working surfaces were investigated through SEM, AES and EDS. The systematical experiment results reveal that the degradation and failure process of solid lubrication for such ball bearing is divided into three stages with different characters. A supposed failure mechanism has been proposed. An improved lubrication treatment based on above mechanism was conducted for the precise ball bearings, and a later test showed that long endurance life with more than 10⁸ revolutions has been reached.     

一种耦合表面络合吸附作用的地下水溶质迁移模型初探

地下水中溶液化学作用对溶质迁移的影响日渐引起人们的关注，特别是发生于固-液表面的吸附作用，对溶质迁移的影响具有非常重要的作用。关于吸附机理的解释很多，其中表面络合吸附是近年来解释吸附作用比较成功的假说之一。本文建立了一个基于表面络合吸附作用的地球化学模式，并将其与传统的对流-弥散模型相耦合，建立了一个能够考虑表面络合吸附影响的溶质迁移模型。通过与已发表的某著名算例的结果进行的对比分析，与前人结果吻合较好，表明本文所建立的模型获得了初步成功。     

A single chip multi-channel surface plasmon resonance imaging system

A single chip, multi-channel surface plasmon resonance (SPR) imaging system has been developed. The equipment has no moving parts and uses a single sensor chip on which multiple channels can be incorporated. A light emitting diode is used as a photon source while a CCD camera forms the detector. The optical configuration has been designed to achieve a uniform illumination of the sample over a fixed area with a range of incident angles. A calibration test using sucrose solutions shows that the sensitivity of the equipment is 4.3×10⁻⁴ refractive index units per pixel line-pair. The use of the system for simultaneous interrogation of different polyelectrolyte thin films, formed by the electrostatic layer-by-layer deposition method, is demonstrated. A reversible pH-dependent response for these organic layers is also reported.     

高纯金属与聚合物膜pH电极的研制

介绍以纯金属为基体,PVC为载体,α-萘胺为活性物质,三氯甲烷为溶剂研制成的聚合物膜电极,将它用于测定溶液的pH,取得了一些成效。     

C＋＋Bezier曲面类的构造

利用Ｃ＋＋面向对象的新特征，对Ｂｅｚｉｅｒ曲面的定义和生成过程进行封装，从而极大地简化了Ｂｅｚｉｅｒ曲面的定义和绘制过程。