Thermodynamic and kinetic consideration on the corrosion of Fe, Ni and Cr beneath a molten KCl-ZnCl2 mixture

Thermogravimetric (TG) experiments have been carried out to study the kinetics of hot corrosion of Fe, Cr and Ni, covered by a molten KCl-ZnCl₂ mixture of a composition close to the eutectic (50 mol% KCl-50 mol% ZnCl₂). Furthermore binary and ternary phase diagrams were calculated in order to describe the corrosion process. The tests were conducted at a temperature of 320 °C in an atmosphere consisting of argon and oxygen. For iron different stages are observed in a TG curve. They can be attributed to the different reaction steps of iron chloride formation (incubation phase), oxide precipitation (linear stage) and scale formation (parabolic or logarithmic stage). Based on these observations a model, described by Spiegel [A. Spiegel, Molten Salt Forum 7 (2003) 253], is confirmed. For Cr and Ni these stages are not observed. At 8 vol% O₂ only slight oxidation of Cr and Ni was observed accompanied by evaporation of the salt deposit. At 16 vol% O₂ the rate of oxidation increases and the experiments yield a curve that is either parabolic or logarithmic for both Ni and Cr. As a result it is shown that the solubility of iron chloride in the KCl-ZnCl₂ melt is higher than the solubility of nickel chloride and chromium (III) chloride in the KCl-ZnCl₂ melt. This enables a higher diffusibility of iron chloride to the upper region of the melt where a higher oxygen partial pressure (p(O₂)) is present leading to a higher oxidation rate of iron.     

真丝绸产品的清洁生产与生态设计

通过对真丝绸整个产品生命过程的分析，对其进行了生命周期评价，说明了丝绸与其产地环境之间的联系和影响，尝试寻求两者之间的和谐关系，提出了清洁生产工艺的规划和各种行之有效的对策和措施，尝试了对环境友好的丝绸印染工艺的生态设计。     

Trace element evaporation during coal gasification based on a thermodynamic equilibrium calculation approach

Thermodynamic equilibrium calculations using the HSC-Chemistry program were performed to determine the distribution and mode of occurrence of potentially toxic and corrosive trace elements in gases from coal gasification processes. The influence of temperature, pressure and gas atmospheres on equilibrium composition was evaluated. In these reducing conditions, the behaviour of the trace elements is complex, but some form of organization can be attempted. Elements were classified into three groups. Group A includes those elements that, according to thermodynamic data at equilibrium, could probably be condensed in coal gasification. Mn is classified in this group. Group B contains those elements that could be totally or partially in gas phase in gas cleaning conditions, and can be divided into two subgroups, depending on whether the cleaning conditions are hot or cold. Co, Be, Sb, As, Cd, Pb, Zn, Ni, V, Cr are elements in this group. Group C contains those elements that could be totally in gas phase in all the possible conditions, including flue gas emissions. Se, Hg and B are the elements that make up this group.     

An economic and environmental assessment of biomass utilization in lignite‐fired power plants of Greece

The environmental and socio‐economic impacts of biomass utilization by co‐firing with brown coal in an existing thermoelectric unit in Greece or through its pure combustion in a new plant were studied and evaluated in this work. The 125 MW_e lignite‐fired power plant in Ptolemais Power Station (Western Macedonia) was used as reference system. The environmental benefits of the alternative biomass exploitation options were quantified based on the life cycle assessment methodology, as established by SETAC, while the BIOSEM technique was used to carry out socio‐economic calculations. The obtained results showed clear environmental benefits of both biomass utilization alternatives in comparison with the reference system. In addition, co‐firing biomass with lignite in an existing unit outperforms the combustion of biomass exclusively in a new plant, since it exhibits a better environmental performance and it is a low risk investment with immediate benefits. A biomass combustion unit requires a considerably higher capital investment and its benefits are more evident in the long run. Copyright © 2005 John Wiley & Sons, Ltd.     

Photovoltaic collectors efficiency according to their integration in buildings

A model for building integrated photovoltaic systems has been developed and implemented in a dynamic simulation tool. This tool takes into account the thermal interactions between the PV collector and the building. The influence of the type of integration upon the PV collector efficiency has been evaluated and hybrid PV/air collectors have been studied. An overall efficiency is defined, including the production of electricity and heat. A case study has been performed on two different typical buildings. In the case of a multi-crystalline silicon PV collector integrated on the roof of a single family house located in Paris, the efficiency of unventilated PV modules fixed on the roof is 14%. If the PV collector is used to preheat the ventilation air, the efficiency reaches 20%. A proper building integration also improves the environmental balance of PV technologies over their life cycle.     

数字加速度传感器ADXL210在轨检仪中的应用

介绍了一种轨道检测仪及其重要传感器数字加速度传感器ADXL210的工作原理、功能、应用，并给出了ADXL210与MCS－51单片机的接口硬件电路和软件程序。     

Carnot comparison of multi-temperature level absorption heat cycles

Comparison of different absorption heat cycles is not always made on the correct manner. This also includes comparison of an ideal absorption cycle with a mechanical analogy. A new Carnot model operating with two heat engines and two mechanical heat pumps is defined to be the correct and logical way to describe the mechanical analogy for an absorption heat pump and an absorption heat transformer. General equations for the Carnot coefficient of performance, COP_r, are exemplified and simulated for an absorption heat pump and an absorption heat transformer, and an entropy flow fraction diagram is introduced. The important fact that the absorption heat cycles must operate under the same conditions when they are compared is discussed.     

兴山煤矿地质构造体系的分析

通过简单的力学分析 ,总结了兴山煤矿断层发展、发育的规律。     

汽车空调制冷系统中应用R407C的分析

本文对混合工质R407C与R12的物理和热力性质进行了比较分析，并针对汽车空调制冷系统的特点，对两种工质在变工况下进行了制冷系统的理论循环分析，阐明了在汽车空调制冷系统中使用R407C的可行性。     

Focal adhesion interactions with topographical structures: a novel method for immuno-SEM labelling of focal adhesions in S-phase cells

Current understanding of the mechanisms involved in osseointegration following implantation of a biomaterial has led to adhesion quantification being implemented as an assay of cytocompatibility. Such measurement can be hindered by intra-sample variation owing to morphological changes associated with the cell cycle. Here we report on a new scanning electron microscopical method for the simultaneous immunogold labelling of cellular focal adhesions and S-phase nuclei identified by BrdU incorporation. Prior to labelling, cellular membranes are removed by tritonization and antigens of non-interest blocked by serum incubation. Adhesion plaque–associated vinculin and S-phase nuclei were both separately labelled with a 1.4 nm gold colloid and visualized by subsequent colloid enhancement via silver deposition. This study is specifically concerned with the effects microgroove topographies have on adhesion formation in S-phase osteoblasts. By combining backscattered electron (BSE) imaging with secondary electron (SE) imaging it was possible to visualize S-phase nuclei and the immunogold-labelled adhesion sites in one energy 'plane' and the underlying nanotopography in another. Osteoblast adhesion to these nanotopographies was ascertained by quantification of adhesion complex formation.