Femtochemistry of Guest Molecules Hosted in Colloidal Zeolites

The ultrafast deprotonation of 2‐(2′‐hydroxyphenyl)benzothiazole (HBT) hosted in nanometer‐sized FAU and MFI zeolites is reported. Samples are prepared via in‐situ incorporation of HBT in the precursor colloidal solutions resulting in the formation of nanometer‐sized zeolites under hydrothermal treatment. The diameter of the zeolite particles formed in the crystalline suspensions is determined by dynamic light scattering and high‐resolution transmission microscopy to lie in the range 40–100 nm. It is shown that the HBT loading does not influence the degree of the zeolite crystallinity but does change the size and the morphology of the individual zeolite nanoparticles. Colloidal suspensions containing the crystalline nanoparticles are well suited for optical investigations since they are sufficiently transparent and clear. The photochemical properties of the HBT guest in the zeolite‐host systems are studied with femtosecond transient transmission spectroscopy. Depending on the acid–base properties either the enol or the keto tautomer of HBT is found to be hosted in the internal voids of the zeolites; upon UV excitation, the HBT‐keto tautomer is converted to the enol form in both MFI‐ and FAU‐type hosts. The HBT photoconversion takes place via an ultrafast deprotonation within 1.5 ps as detected by femtosecond transient absorption spectroscopy.     

On regional nonlinear H-filtering

The structure of the nonlinear H^∞-filter in the neighborhood of the estimated trajectory is investigated and a bound on the size of the neighborhood that allows this structure is determined, both for finite and infinite horizons. Riccati inequalities that depend on the estimated trajectory are derived for finding the filter gain matrix and an algorithm for calculating the bound on the size of the above neighborhood is presented. Explicit formulas are obtained in the infinite horizon case for the minimum achievable disturbance attenuation level, the size of the neighborhood, and the corresponding filter gain.     

Integrated Smart Sensor Calibration

In many applications electronic sensors are used toimprove performance and reliability of measurement systems. Suchsensors should provide a correct transfer from the physical signalto be measured to the electrical output signal. One importantstep to achieve this, is to calibrate each sensor by applyingdifferent reference input signals and adjusting the sensor transferaccordingly. Besides expensive reference equipment the calibrationprocess takes much time and attention per individual sensor,which means a considerable increase in sensor production costs.By including at the sensor or sensor interface chip a programmablecalibration facility the calibration of such smart sensors caneasily be automated and can be executed for a batch of sensorsat a time, thus minimizing the calibration time and costs. Thispaper presents a calibration method and options for integrationin the smart sensor concept, in hardware as well as in software.An advantage of the proposed method is that it does not needa large matrix of calibration data, which needs to be storedin a look-up table or converted into a correction formula, butinstead it uses a step-by-step approach to correct the sensortransfer at each calibration measurement until the error is sufficientlysmall.     

电缆气压保气率计算机统计系统

介绍了电缆气压保气率计算机统计系统开发的目的和意义，系统程序的流程和结构，以及系统程序的编制和应用。     

Computer support for strategic organizational decision-making

While information systems continue to be promoted within organizations as tools to support strategic decision-making, there is growing concern over the ability of such systems to model the social and political complexity of the situations to which they are being applied. This paper examines the nature of organizational decision-making and the use of computer-based systems to support this activity. The debate queries the extent to which such artifacts should be allowed to become enmeshed and embedded within the strategic decision-making activities of organizations which operate within increasingly complex environments.     

智能控制的理论和方法

本文简要地回顾了智能控制的发展过程，讨论了智能控制的几个主要理论与方法，最后对智能控制的发展提出了作者的看法。     

非电量微机采集系统

实现水电厂电量快速微机巡回检测，温度采集较其它信号更为困难，本文着重讨论温度信号转换及与微机系统的连接。且介绍某水电厂微机控系统中非电量检测装置的硬件结构和软件编制。     

Some factors affecting the electrical properties of carbon-black-loaded butyl rubber during vulcanization

Butyl rubber mixtures loaded with 70 phr general purpose furnace black (GPF) and tetramethyl thiuram disulphide (TMTD)/S as vulcanizing system were prepared. The kinetics of their electrical conductivity development during the vulcanization process were followed by using an especially devised system. It was found that the increase in the electrical conductivity during vulcanization obeys an exponential growth function with time constant τ, which markedly decreases with increasing vulcanization temperature as well as with the efficiency of the vulcanizing system. After completion of the vulcanization process, about 80 min, the samples obtained possess reasonable stability and reproducibility of electrical conductivity.     

DSS research and practice in perspective

The aim of this paper is to assess the state-of-the-art in the Decision Support Systems (DSS) field from both a research and a practice perspective. Three main dimensions of DSS research and practice are addressed: 1) supporting human decision-making processes, 2) integrating DSS into the organizational context, and 3) identifying new application domains. The related analysis and discussion provides a better understanding of past developments in the DSS field and insights into future evolution patterns.     

Tracking Control and Synchronization for Two-Dimension Discrete Chaotic Systems

1　ＩｎｔｒｏｄｕｃｔｉｏｎＳｉｎｃｅ 1 990 ,ｃｈａｏｔｉｃｓｙｎｃｈｒｏｎｉｚａｔｉｏｎ[1～ 4] ａｎｄｃｈａｏｔｉｃｃｏｎｔｒｏｌｌｉｎｇ[5～6] ｈａｖｅｒｅｃｅｉｖｅｄａｇｒｅａｔｄｅａｌｏｆａｔｔｅｎｔｉｏｎ[7～1 1 ] ,ａｎｄｃｈａｏｔｉｃｓｙｎｃｈｒｏｎｉｚａｔｉｏｎｉｓａｐｈｅｎｏｍｅｎｏｎｏｆｉｎｔｅｒｅｓｔｉｎｆｉｅｌｄｓｆｒｏｍｅｌｅｃｔｒｏｎｉｃｓｔｏｃｏｍｍｕｎｉｃａｔｉｏｎ[1 2 ] ,ａｎｄｆｒｏｍｂｉｏｐｈｙｓｉｃｓｔｏｎｅｕｒｏ ｓｃｉｅｎｃｅ[1 3] .Ｉｆｃｈａｏｔｉｃｓｙｎｃ…