U形接触片多工位级进模设计与制造

针对U形接触片的技术要求,确定了合理的冲压工艺方案,阐述了该多工位级进模设计要点,产品质量达到设计要求。同时,还介绍了楔块装置及磷铜薄片整形的微调装置。     

复合式连杆切边模设计

介绍了一种复合式连杆切边模,可在压力机一次行程过程中完成连杆的冲孔、切边和整形工序,该模具具有工作效率高、切边质量好等优点.     

超声衍射时差法探伤和定量技术--焊缝超声检测最新欧洲标准介绍

超声衍射时差(TOFD)法是焊缝超声检测和缺陷定量很有发展前景的新技术。它根据入射纵波在缺陷端部产生的衍射波传播时差进行测深定高,是一种可靠性甚高的方法,有A,D,B三种显示方式,探伤结果记录较直观和客观。根据最新欧洲标准(草案)ENV583 6:2000的有关规定,介绍超声TOFD技术应用要领,企望该技术在国内无损检测(NDT)领域迅速推广应用。     

方波信号发生器及场效应管驱动器

本文介绍方波信号发生器及场效应管驱动器的原理与设计。实验证明,设计的方波信号发生器与场效应管驱动器工作稳定可靠,所研制的方波交流高频弧焊电源已成功地对薄钢板进行了焊接。     

基于改进粒子群算法的多目标分布式电源选址定容规划

通过分析分布式电源对配电网的影响,以有功功率损耗、电压质量及分布式电源总容量为优化目标,基于模糊理论建立了分布式电源在配电网中选址定容的多目标优化模型,并提出了一种改进粒子群算法进行求解。在算例仿真中,基于IEEE 14标准节点系统,采用MATLAB仿真工具对所提算法进行了测试,证实了所提算法全局搜索能力较强、收敛速度较快,并通过比较分析验证了该模型和算法的可行性及有效性。     

The frequency partitioned block modified filtered-x NLMS with orthogonal correction factors for multichannel Active Noise Control

The Normalized Least Mean Square (NLMS) algorithm with a filtered-x structure (FxNLMS) is a widely used adaptive algorithm for Active Noise Control (ANC) due to its simplicity and ease of implementation. One of the major drawbacks is its slow convergence. A modified filtered-x structure (MFxNLMS) can be used to moderately improve the speed of convergence, but it does not offer a huge improvement. A greater increase in the speed of convergence can be obtained by using the MFxNLMS algorithm with orthogonal correction factors (M-OCF), but the usage of orthogonal correction factors also increases the computational complexity and limits the usage of the M-OCF in massive real-time applications. However, Graphics Processing Units (GPUs) are well known for their potential for highly parallel data processing. Therefore, GPUs seem to be a suitable platform to ameliorate this computational drawback. In this paper, we propose to derive the M-OCF algorithm to a partitioned block-based version in the frequency domain (FPM-OCF) for multichannel ANC systems in order to better exploit the parallel capabilities of the GPUs. The results show improvements in the convergence rate of the FPM-OCF algorithm in comparison to other NLMS-type algorithms and the usefulness of GPU devices for developing versatile, scalable, and low-cost multichannel ANC systems.     

S-粗集与数据挖掘单位圆特征

给出单向S-粗集(one direction singular rough sets)、单向S-粗集对偶(dual of one direction singular rough sets)的结构。单向S-粗集与单向S-粗集对偶是改进Z.Pawlak粗集得到的,单向S-粗集与单向S-粗集对偶具有动态特性。给出单向S-粗集、单向S-粗集对偶与Z.Pawlak粗集的关系。S-粗集具有三类形式:单向S-粗集、单向S-粗集对偶、双向S-粗集,利用单向S-粗集、单向S-粗集对偶,给出数据内挖掘、数据外挖掘概念,给出数据内挖掘的外同心圆定理、数据外挖掘的内同心圆定理,并给出其应用。S-粗集是粗集理论与应用研究的新分支。     

机组控制逻辑图在故障处理中的应用

府谷压气站燃气轮机-压缩机组已经安全运行8年多,由于机组长期运行,设备组件老化,机组出现故障的次数、几率逐步上升,故障处理的难度也在逐渐增加。如何安全、快速、有效的解决机组出现的各种故障,保障机组安全平稳运行显得非常重要。本文仅针对机组逻辑控制图在机组故障处理过程中的应用,以案例的方式详细的阐述了机组故障处理的方法,旨在说明进行机组故障处理时,不同的思路和方法在机组故障处理过程中具有不同的效用,以达到抛砖引玉、拓展思路的目的。     

水电机组智能盘车系统关键技术探讨与实践

传统盘车方法存在布点数量小、停点不准确、读数主观性强、盘车耗时长等问题,因此迫切需要开发一种通用性强、效率高、精度高、智能性强的全自动智能盘车系统,本文对其相关关键技术进行了深入有效的探讨,在此基础上,提出了相应的解决方法与方案。通过现场试验,验证了所提出解决方案的有效性与可行性。     

Computer-aided measurement plan for an impeller on a coordinate measurement machine with a rotating and tilting probe

This paper presents a computer-aided measurement plan (CAMP) for an impeller on a coordinate measurement machine (CMM) with a rotating/tilting probe. The blade surfaces of a machined impeller were measured exactly to secure the machining tolerance and surface finish of the impeller. CMM with a rotating and tilting probe is commonly used for this measurement. However, it is not easy to evaluate all the points on the impeller surfaces due to the time-consuming nature of the CMM measurement. In addition, many points cannot be easily accessed by the CMM probe due to the interference between the probe and the impeller blades. Furthermore, the inherent complexity of the existing teaching operation of a probe using a joystick suggests the necessity of developing a new method for the measurement planning of an impeller. Thus, this paper proposes a CAMP for effectively gauging the inspection points based on the ruled line information of the impeller blade surfaces. The proposed plan partitions the surfaces into several measurement regions based on the ruled lines of a blade surface and the approach vectors of the probe. Finally, a case example for an impeller is presented to demonstrate the effectiveness of the proposed strategy.