提高干压各向异性SrM磁体磁性能的方法

以Y30H-1的SrM预烧料为原料,通过对二次添加剂、二次球磨及烧结曲线的调整,做出了Br≥380mT,Hcb≥240kA穖-1,Hcj≥250kA穖-1,(BH)max≥27.0kJm-3的干压各向异性锶铁氧体产品。     

The high-resolution time-of-flight spectrometer TOFTOF

The TOFTOF spectrometer is a multi-disc chopper time-of-flight spectrometer for cold neutrons at the research neutron source Heinz Maier-Leibnitz (FRM II). After five reactor cycles of routine operation the characteristics of the instrument are reported in this article. The spectrometer features an excellent signal to background ratio due to its remote position in the neutron guide hall, an elaborated shielding concept and an s-shaped curved primary neutron guide which acts i.a. as a neutron velocity filter. The spectrometer is fed with neutrons from the undermoderated cold neutron source of the FRM II leading to a total neutron flux of 10¹⁰n/cm²/s in the continuous white beam at the sample position distributed over a continuous and particularly broad wavelength spectrum. A high energy resolution is achieved by the use of high speed chopper discs made of carbon-fiber-reinforced plastic. In the combination of intensity, resolution and signal to background ratio the spectrometer offers new scientific prospects in the fields of inelastic and quasielastic neutron scattering.     

Influence of zero-loss filtering on electron optical phase contrast

Complex scattering amplitudes are used to calculate the phase contrast of colloidal gold particles. Comparison of measurements of the phase contrast intensity at the centre of the gold particle as a function of defocus for unfiltered and zero-loss filtered images demonstrates the increase in phase contrast achieved by zero-loss filtering even for a thick carbon substrate film. The granulation of amorphous germanium films is measured by the spatial rms (root mean square) values of image intensity in a defocus series.     

Influence of Two Salicylate Components on the Particle Size of an Oil-in-Water Emulsion with Nonionic Surfactants

This paper reports a study undertaken using techniques of static and dynamic light scattering to investigate the influence of sodium salicylate and methyl salicylate on droplet size of oil-in-water emulsions. The rates of changes were measured by determining the size and distribution of the oil droplet in the material. All emulsions showed a bimodal size distribution; the mean diameters and polydispersity were calculated from intensity. These data were analyzed with nonlinear regressions and bootstrap methodology. An amount of methyl salicylate component induced a decrease of mean diameter and standard deviation. On the contrary, sodium salicylate entailed the growth of all droplet populations and coalescence for the highest concentration.     

IR LASER BACKSCATTERING FROM AN ARBITRARILY SHAPED DIELECTRIC OBJECT WITH ROUGH SURFACE

The backscattering of light wave from arbitrarily convex dielectric objects withrough surface is investigated and formulas for calculating the backscattering cross-section of bothcoherent and incoherent fields are obtained.In the infrared wave-band,the influence of the ge-ometry,permittivity and statistical characteristics of the rough surface on LRCS is analyzed,byusing rough sphere and ellipsoids as examples.     

Behaviour of mesogenic side group polyacrylates in dilute and semidilute regime

The solution behaviour of a new mesogenic side group polyacrylate in tetrahydrofuran and toluene has been investigated by static and dynamic light scattering. In the dilute regime the polymer behaves as typical polydisperse linear chains in good solvent and the dynamics is dominated by a single fast mode. Cluster formation was detected starting at a concentration around 50 g l⁻¹. It seems to be independent of the solvent as well as of polymer molecular weight. In the semidilute regime, the behaviour of the reduced osmotic modulus leads to the conclusion that repulsion between the chains is stronger than in linear macromolecules. The appearance of larger clusters was revealed above a characteristic concentration and is slightly dependent on the polyacrylate molecular weight. The dynamics was generally characterised by a fast mode related to the cooperative diffusion and by a slow mode associated with large clusters. The existence of a network of multiconnected clusters is envisaged with increasing solution concentration.     

几种新型多波长光纤激光器

综合报道几种新型多波长光纤激光器 ,并对这些激光器的机理、实验装置和研究结果进行了详细介绍 ,对今后多波长激光器的发展方向作一展望。     

Energy relaxation in GaInAs/AlInAs heterojunctions and GaAs/AlGaAs multiple quantum wells

We have studied electron energy relaxation in GaInAs/AlInAs heterojunctions and GaAs/AlGaAs multiple quantum wells using mobility measurements as a function of electric field and temperature, in the range 3K to 300K. The results in the range 3 to 20K show a power loss rate which is dependent on (T_e − T_l), suggesting that the energy relaxation occurs through acoustic phonon scattering. At electron temperatures greater than 20K, the experimental results are modelled using a standard expression for polar optical phonons. This modelling yields 30meV and 31meV for the polar optical phonon energy in GaAs and InGaAs respectively.     

光纤中受激喇曼散射的孤子效应

本文在综述近年来有关光孤子研究成果的基础上,对单模光纤中受激喇曼散射的喇曼孤子产生进行了详细地描述。从理论上分析了喇曼互作用及喇曼孤子的形成过程,讨论了喇曼孤子产生的实验方法及有关应用。     

Numerical simulation and error analysis for thermal diffusivity measurements using laser-induced thermal grating technique

The laser-induced thermal grating technique has been used to determine the thermal diffusivity of liquids and liquid mixtures. But the dynamic behaviour of the transient thermal grating has not yet been thoroughly investigated, and the systematic errors, which result from the departures from one-dimensional heat conduction, have scarcely been studied quantitatively. In this paper. a three-dimensional numerical simulation and results of the transient thermal grating technique are presented, which enable a good understanding of the dynamic behaviour of the transient thermal grating. The results of this simulation are important for the proper design of the experimental setup to keep the systematic errors for the diffusivity measurement small. Based on the simulation method, the systematic errors were analyzed quantitatively. Here, the following effects were studied: (I) sample thickness, (2) intersection angle, (3) absorption, (4) Gaussian beam intensity distribution and focusing of heating laser beam, and (5) heating pulse duration and laser power. This error analysis makes it possible to specify the criteria for optimum measuring conditions, to correct the measured thermal-diffusivity values for systematic errors, and to estimate the accuracy of the measurements.