Corrosion Behavior of 316LN and 316 Stainless Steels During Long-term Exposure to Aerated 0.5 M NaCl Using Electrochemical Noise Technique

In the present work 316LN as well as 316 stainless steel (SS) coupons each of dimensions (0.025 × 0.018 × 0.006 m³) in well-polished condition were used as two nominal electrodes which were immersed in the aerated solution of 0.5 M NaCl. Correlated current and potential electrochemical noise (EN) signals were collected at 1 Hz sampling frequency for 1 h daily over a period of 30 days. The detrended EN data were used to calculate the noise resistance (R _N) as well as the spectral noise resistance at zero frequency (R _SN^o) values and other statistical parameters. To study the nature of pits and distribution of their diameters as well as depths, extensive observations of the pitted and the blank specimens were carried out using Confocal Laser Scanning Microscopy (CLSM). The current and the potential records of the two alloys showed distinct differences in their corrosion behavior. It was observed that within less than 4 h of immersion, 316SS showed signals indicative of unstable pitting and onset of stable pitting was noticed after 48 h of exposure. However, until about 24 h, 316LN showed just the random signals and unstable pitting was observed after 28 h. The signals clearly indicated continuous growth of the stable pits in 316SS as against the repassivation of the unstable pits in 316LN after 7 days exposure. It was observed that R _N values showed a continuous decrease in the case of 316SS, but were quite stable in the case of 316LN over the exposure period. Concurrent to these observations it was observed that 316SS specimen was extensively pitted. The frequency distributions of pit diameters as well pit depths were observed to be highest at 10-20 μm and 5-10 μm, respectively. However, pits with as large as 70-80 μm diameter and as deep as 20-25 μm too were observed. No pits were observed in case of 316LN even after 30 days of exposure, an observation that corroborates well with the stable R _N values. Thus, in the present investigation, the long-term tests using EN technique coupled with CLSM studies conclusively prove that many unstable pits initiated in 316SS turn into stable ones resulting in insidious localized corrosion attack whereas the unstable pits initiated in 316LN get passivated in the simulated coastal environment.     

行波管放大器相位噪声的分析及其抑制

主要分析规则调相信号对行波管放大器频谱纯度的影响,并且根据行波管放大器相位噪声产生的过程和原因,提出两种抑制相位噪声的方法.     

空调器中多翼离心风机的噪声研究及结构优化

采用逐步回归法对大量的多翼离心风机实验数据进行拟合,针对家用空调行业中以噪声为其最重要 的考核标准,得出了噪声与叶轮结构参数及风机性能参数间的近似关系式,并以噪声为目标函数进行了优化计算。     

接收机整机最小噪声系数的实现

前级LNA的性能指标的好坏对接收机整体性能起主要作用。较流行的设计方法是用ADS等仿真软件在Smith圆图上作出LNA的等增益圆和等噪声圆，以确定LNA是否同时满足所要求的增益和噪声系数指标。这种方法虽然满足了设计要求，但往往不能获得整机噪声的最佳点。本文在符合设计指标后进一步对噪声和增益的关系进行分析，建立适用于常用接收机的简单模型，在此基础上获得基于整机噪声的最佳点。这种设计方法可以广泛应用于各种微波接收系统中,降低整机哭声系数.     

KMLS型立式砂泵的振动噪声产生原因及解决措施

针对KMLS型立式砂泵振动、噪声产生原因及其表现特征,提出了解决措施。通过对这些原因的分析研究,可以提供泵设计者和生产者在减少砂泵振动方面采取相应的措施,使KMLS型立式砂泵能更好的服务于用户。     

红外背景干扰研究

根据从许多地区收集来的录象磁带上的图象数据和大量红外图象数据，对红外背景图象内的干扰进行了研究。图象内的噪声是以象元电平为单位的均方根形成计算。图象经过空间滤波处理，对其内的干扰再进行计算。为获得关于红外背景图象的空间频率构成的信息，在滤波和非滤波两种状态下计算了图象的光谱密度，把计算出的干扰值输入数据库取出多组数据并绘图，确定参数量（如天气、背景类型和测量条件等）对干扰电平的影响。     

光缆CATV用DFB激光器发射组件

介绍了国内首次研制的光缆ＣＡＴＶ用１．３μｍＤＦＢ激光器组件。组件工作频带达到１ＧＨｚ，带内起伏〈１ｄＢ，组件的ＲＩＮ〈－１５３ｄＢ／Ｈｚ；出纤光功率〉２ｍＷ，载噪比ＣＮＲ〉５０ｄＢ。首次实现用低反射尖锥端光纤的ＤＦＢ激光器耦合。     

噪声测量作为筛选光电耦合器件的一种方法

本文针对目前用于光电耦合器件筛选方法的不足，提出了用测量耦合器件噪声功率谱的方法来筛选掉噪声值大的器件，给出一批光电耦合器件的测量统计结果及在不同工作点时的噪声功率谱，并给出相应的筛选标准，实验结果表明，这种方法是有效、可行的。     

Polyspectral Analysis of Two-dimensional Mixed Processes and Coupled Harmonics

1　ＩｎｔｒｏｄｕｃｔｉｏｎＩｎｍａｎｙａｐｐｌｉｃａｔｉｏｎｓ,ｓｕｃｈａｓｒａｄａｒ,ｓｏｎａｒ,ｇｅｏｐｈｙｓｉｃｓ,ｒａｄｉｏｃｏｍｍｕｎｉｃａｔｉｏｎａｎｄｍｅｄｉｃａｌｉｍａｇ ｉｎｇ ,ｔｈｅｐｒｏｂｌｅｍｏｆｔｗｏ ｄｉｍｅｎｓｉｏｎａｌｆｒｅｑｕｅｎｃｙｅｓｔｉ ｍａｔｉｏｎｈａｓｒｅｃｅｉｖｅｄａｌｏｔｏｆａｔｔｅｎｔｉｏｎｉｎｒｅｃｅｎｔｙｅａｒｓ.ＩｎｔｈｅｃａｓｅｏｆａｄｄｉｔｉｖｅｗｈｉｔｅＧａｕｓｓｉａｎｎｏｉｓｅ,ｎｕｍｅｒｏｕｓｍｅｔｈｏｄｓｓｕｃｈａｓＭＥＭＰ[1 ] ,ＭＵＳ…     

柴油机低频排气噪声规律分析

针对柴油机（4－85）低频排气噪声，对其产生机理、规律及其影响因素等作了理论计算、分析及实验。对低频排气噪声信号进行频域分析后可知，其主要由一系列离散的谐波组成，是以柴油机点火频率为基频的一种类周期性噪声，有可能应用有源噪声控制技术。