油藏能量势及应用前景

建立了油藏能量势的定义，阐述了其物理意义。油藏能量势好地揭示油藏开发过程中流体运动的本质，运用该定义能较好地解释油藏开发过程中的水窜、气窜、间歇注水和脉冲注水、注水井调剖和注氮气采油技术机理，对指导油藏勘探、开发具有一定的意义。     

“四低一高”工艺在85kA预焙槽的应用与优化

本文介绍了“四低一高”(低电解温度、低分子比、低氧化铝浓度、低阳极效应系数、高工作电压)工艺技术条件在85kA预焙槽上的应用与优化,实验证明“四低一高”工艺需要针对具体槽型进行优化设计,适宜的技术条件对提高电流效率、降低直流电耗,节能效果显著。     

机械化竖窑技术和节能特性简介

鞍钢耐火公司新建两座430m^3机械化石灰竖窑，与普通窑炉相比具有热耗低、石灰活性高、燃料适应性强、结构简单的特点。     

铀表面初始氧化行为的电子能量损失谱研究

利用俄歇电子能谱仪获取了表面清洁的铀及其在氧化过程中的电子能量损失谱(EELS)，研究这些电子能量损失谱线显示：清洁表面铀的等离子损失的实验值与理论值较为符合；随着氧化程度的加剧，体等离子体(BP)、表面等离子体(SP)以及价带间跃迁所造成的电子能量损失峰发生了明显的连续偏移和强度的变化，表明室温下清洁表面铀暴露微量纯氧后，在铀表面上发生了U→UO→UO2初始氧化过程。同时，又采用了俄歇电子能谱(AES)和X射线光电子谱(XPS)对照分析了铀的初始氧化过程。     

����Ȼ��Ϊ��Դ��ѹ��ʽ������ϵͳ

以天然气为能源，用燃气机代替电动机驱动压缩机并充分利用发动机废热、工业余热以及低品位环境热量的采暖、空调装置——燃气压缩式热泵近年来发展迅速。美国燃气设备的总装机容量已达到1．2GW，日本燃气机热泵占全部燃气制冷设备的29％，总装机容量大约1GW，燃气机热泵在英国、法国、德国、瑞士等都得到了较快的发展与应用。中研究了以天然气为驱动能源的压缩式热泵的特点及能量利用率，分析并测试了该系统的运行特性及交工况特性，进行了各种工况及转速下的实验研究。结果表明，该系统具有较好的部分负荷特性、一次能源利用率及交工况特性，为一种绿色高效的供热空调系统。     

常减压蒸馏装置换热网络的节能优化

利用夹点技术理论对耗能严重的某炼油厂常减压蒸馏装置进行用能诊断分析;并结合热力学原理得到两种优化换热网络,节能效果显著。     

实炉底节能连续式加热炉

轧钢生产使用实炉底连续式加热炉加热钢坯，炉内双纵滑管用耐热耐高温材料，无水冷，起到节约水、电的作用，达到节能增效的目的。     

Measurement of specimen charging in scanning electron microscopy with a kelvin probe

A vibrating Kelvin probe in form of a platinum wire loop is used to measure the surface potential U_s on electron-irradiated free-floating metal and insulator specimens as a function of electron energy E. This allows an accurate measurement of the critical electron energy E₂ for no charging. At energies below E₂, the positive charging increases with decreasing energy to U_s=2–5 eV at E=0.5 keV and switching off the collector bias of the Everhart-Thornley detector. A two-to threefold increase of U_s is observed when the bias is switched on. For E > E₂, the strong increase of a negative surface potential can be measured. Insulating films free-supported on a conductive substrate show a steep decrease to small positive and negative U_s when the film thickness becomes lower than the electron range at a critical energy E₃ > E₂. At insulating specimen the temporal decrease of charging can be measured when the electron beam is switched off.     

A preliminary analysis of the biomass energy production potential in Africa in 2025 considering projected land needs for food production

This paper provides a preliminary examination of present and projected land use in Africa to estimate the potential availability of land in 2025 for use in producing biomass energy. Fifty countries are included in the analysis. Future cropland requirements are projected on the basis of average African cereal crop yield improvements since 1972, and minimum nutritional requirements are assumed to be met in 2025 without increasing imports above present absolute levels. Cropland, natural forests and other wilderness areas are excluded from consideration for biomass energy use. Woody biomass energy yields are estimated on the basis of nationally averaged precipitation, using a yield-precipitation correlation for commercial eucalyptus plantations in Brazil. The total African bioenergy production potential in 2025 is estimated to be about 18 EJ per year for a set of baseline assumptions that includes planting only 10% of the available non-crop, non-forest, non-wilderness area with biomass energy crops. A preliminary cost assessment suggests that much of this biomass could be produced for $1–2 GJ⁻¹. A number of uncertainties in the modelling assumptions are examined through a sensitivity analysis. Despite limitations in the model used here, one robust conclusion is that Africa as a whole has a significant biophysical potential for producing biomass energy. This result suggests that more detailed country and sub-country level assessments would be worthwhile to understand better the practical prospects for future biomass energy production in Africa.