企业节能减排的监控系统研究

经济发展与节能减排是一个矛盾的统一体,如何在二者之间进行平衡,考验着中国人的智慧。通过行业分类选取恰当的节能减排指标、采用统计学的基本原理、应用质量控制的技术与方法,提出了节能减排的指标体系和监控方法,以期对节能减排实施动态监控,对我国现阶段的企业节能减排工作有着重要的参考价值。     

混合炭黑TST-103在轮胎内层帘布胶中的应用

研究了混合炭黑TST-103在轮胎内层帘布胶中的应用。小配合和车间大料及成品轮胎试验表明，使用8份混合炭黑TST-103，内层帘布胶的工艺性能、物理性能及实际使用性能均与原内层帘布胶相近，而每千克胶料成本降低了0．33元。     

Calculation of single adsorption isotherms from gravimetrically measured binary gas mixture adsorption isotherms on activated carbon at high pressures

A method is developed for the calculation of single-component adsorption isotherms from gravimetrically measured binary gas mixture adsorption isotherms at high pressures, at two temperatures and for different mole fractions of the gas phase. The adsorption of nitrogen/methane on active carbon Norit R1 is taken as an experimental example.     

不同线密度粘胶原丝及其碳纤维的结构性能对比

用Weibull分析处理 10mm长的 4种不同线密度粘胶原丝和相应碳纤维的单丝断裂强度 ,得到原丝线密度、强度分布和碳纤维强度的对应关系。采用透射电镜 (TEM )和小角X散射 (SAXS)分析粗旦原丝 ,发现孔洞较多 ,并存在大于 70nm的大孔洞。截面和表面照片也揭示出细旦原丝截面相对规整 ,表面较光滑 ,粗旦原丝则反之。结果表明 ,原丝线密度小 ,截面形状圆整 ,缺陷少 ,所制得的碳纤维强度高。     

Intergranular oxidation of silicon in 20Cr-25Ni niobium-stabilized stainless steel at 1140–1230 K

The kinetics of intergranular oxidation of silicon in a 20Cr-25Ni Nb-stabilized stainless steel are reported, at temperatures in the range 1140–1230 K, in CO₂ at 40 bar pressure. The depth of attack increased parabolically with respect to time, with an activation energy of 335±30 kJ/mol. The mechanism of growth is discussed in terms of classical internal-oxidation theories, and an alternative explanation based on an available-space theory is developed. The internal oxidation rates in a number of different alloys are compared with diffusivities of metals in the base alloy. It is proposed that intergranular oxidation in the 20–25 Nb steel is controlled by the rate of outward diffusion of iron or chromium in the alloy.     

基于脱钩模型的新疆碳排放与经济增长的关系研究

在共建丝绸之路经济带以及生态文明的大背景下,新疆作为丝路经济带的核心区与中国西部重要的桥头堡,其经济发展的速度与效益值得关注。尤其新疆是我国重要的能源资源储备区,如何协调好能源开发过程中的碳排放与经济增长之间的关系,是当前摆在我们眼前的一大课题。本文旨在通过脱钩模型分析新疆碳排放与经济增长之间的关系,得出新疆碳排放与经济增长总体上呈现弱脱钩的结论,据此分析弱脱钩状态产生的原因,并提出了有针对性的对策建议,以期促进新疆经济能更好的适应经济新常态。     

40Cr钢渗氮过程中碳原子的迁移

将正火４０Ｃｒ钢样在不同温度下进行不同时间的气体渗氮，对其横断面进行波谱分析，发现渗氮前沿附近自始至终存在着典型的贫碳区，其两侧为富碳区，透射电镜分析结果表明，碳原子的重新分布包括碳化物的回溶、碳的扩散及碳化物长大三个过程。     

Application of optical transmission interferometry for in-situ structural investigations of titanium dioxide sputter-deposited coatings

Titanium dioxide coatings (from 0.1 to 1.5 μm thick) have been dc sputter-deposited on glass slides from titanium targets in various Ar-O₂ reactive gas mixtures. Deposition rate and optical properties were controlled in-situ by optical transmission interferometry (OTI) with an optical fibre located behind the glass substrate in order to perform a real-time control of transmittance of the growing film. Thus, it is possible to determine in-situ the optical indices (n, k) and the thickness of the as-deposited film by using a simple simulation, developed on Matlab software. The optical properties of the films were investigated in relation to their structure, which depends on the sputtering conditions adopted. In particular, the effects of the sputtering pressure (working pressure and oxygen partial pressure), the discharge power and the substrate location into the reactor are investigated in detail. Films structure is assessed by standard grazing incidence X-ray diffraction (XRD).     

低碳低合金铸钢力学性能的研究

利用Olympus光学显微镜、扫描电镜(SEM)及能谱分析(EDAX)探讨了等温淬火工艺对低碳低合金CrMnSi铸钢力学性能的影响,并通过XRD定量分析了相的组成.结果表明,合适的等温淬火工艺,可获得一定数量的贝氏体和残余奥氏体(约6%)的复合组织,冲击断口形貌由解理刻面变为韧窝状,铸造成形无缺口试样(10 mm×10 mm×55 mm)的冲击韧度由ακ≤30 J/cm2增加至ακ≥170 J/cm2,硬度HRC≥40,具有较高硬度和冲击韧度的配合.     

碳含量对Ti(CN)基金属陶瓷力学性能的影响

研究了Ti(CN)基金属陶瓷的碳含量对其物理力学性能的影响。结果表明 ,在一定范围内 ,随着碳含量的减少 ,Ti(CN)基金属陶瓷的矫顽磁力、钴磁和硬度降低 ;而抗弯强度则明显增高。