La改性的Ag/TS-1催化剂上丙烯选择氧化制环氧丙烷

在H2 和O2 混合气体存在下 ,在常压固定床、石英反应器上考察了La改性的Ag/TS - 1催化剂催化丙烯环氧化反应。研究结果表明 ,Ag和La负载在TS - 1上的先后顺序对丙烯环氧化反应有影响。H2 在丙烯气相氧化反应体系中起着重要的作用。     

郑411块超稠油试油试采工艺技术应用

郑411块沙三段地层疏松出砂、原油粘度高，属中深层超稠油，常规试油试采方法难以突破出油关，采用APR全通径氮气垫测试、地层与井筒复合防砂、水平井配合直井蒸汽吞吐、氮气泡沫封堵调剖和井筒加热举升稠油等配套工艺技术，取得了较好的效果，为中深层超稠油油藏的开发提供了技术思路。     

长链烯烃-苯烷基化反应的分子筛催化剂再生性能的研究

通过热重分析和活性稳定性评定考察催化剂的再生性能。研究结果表明,进行氯气吹扫以及苯抽提后进行氮气吹扫两种预处理,导致失活催化剂的起燃点和烧焦反应活化能均有所提高,有利于控制烧焦反应速度。按苯抽提、氮气吹扫、烧焦的顺序,分三个阶段进行催化剂再生,再生催化剂的活性稳定性得到更充分的恢复。     

LB技术制备大面积超薄PMMA抗蚀层的研究

采用自行研制的ＬＢ自动提膜装置，制备出大面积（１０×８ｃｍ２）、高质量的ＰＭＭＡ超薄抗蚀剂膜，并将其用于高分辨率铬掩模版的研制。通过电子束曝光，湿法蚀刻，制作了分辨率优于０．５μｍ，特征线宽０．３８μｍ的４（１００ｍｍ）铬掩模版。     

载体及反应条件对Pt/BaKL沸石催化剂芳构化性能的影响

研究了γ-Al_2O_3或SiO_2载体,以及反应条件对Pt/BaKL沸石催化剂芳构化性能的影响。发现经过碱化或负载Sn的γ-Al_2O_3作为载体,能够较好地保持该催化剂在正己烷芳构化反应中的高活性和高选择性,并有益于改善Pt/BaKL沸石催化剂的抗硫性能。     

CH_4、CO_2与O_2制合成气的研究 Ⅱ工艺条件的影响

在固定床反应器中考察了１２％Ｎｉ－５％ＲＥ－２％Ｃｕ－２％Ｌｉ／Ａｌ２Ｏ３（ｍａｓｓ）催化剂在ＣＨ４、ＣＯ２与Ｏ２催化氧化重整制合成气反应中催化剂粒径、工艺操作条件（空速与温度）及原料气配比对反应的影响，确定了较佳的操作条件：催化剂粒径２０～４０目，反应最佳温度为８００℃，ＳＶ＝４×１０４ｍｌ／（ｇ·ｈ）。同时看到在不同的原料气配比的条件下该催化剂的活性亦很稳定，不仅达到了反应平衡，且产物Ｖ（ＣＯ）／Ｖ（Ｈ２）比有很强的调变性。     

Pyrene oxidation as a model reaction for characterizing the mechanism of coke oxidation on Y zeolites

The same effect of temperature on the production of CO, CO₂ and H₂O was found during oxidative treatment of HY zeolites either impregnated with pyrene or coked. Therefore, pyrene oxidation can be used to specify the mechanism of coke oxidation. Three types of reactions can be distinguished: (a) condensation of polyaromatic molecules, (b) oxidation of polyaromatics into aldehydes, ketones, acids and anhydrides and (c) decarbonylation or decarboxylation of oxygenated compounds, all these reactions involving protonic sites.     

TPC方法研究催化剂热分解动力学

设计了ＴＰＣ方法研究催化剂前驱体的热分解；对ＴＰＣ方法求取催化剂的热分解动力学方程进行了理论推导；采用ＴＰＣ方法试验求得了Ｎｉ－Ｚｎ／Ｃ催化剂的热分解动力学参数。试验表明，ＴＰＣ方法能直观、灵敏、方便地反映催化剂活性组份前驱体的本征热分解。     

Monitoring of CdTe atomic layer epitaxy using in-situ spectroscopic ellipsometry

Atomic layer epitaxy or ALE has proven to be useful for the growth of epitaxial layers of high uniformity, good quality, and well-controlled thickness. In this study, we have carried out in-situ monitoring during the atmospheric pressure ALE of CdTe on GaAs (100) substrates using spectroscopic ellipsometry (SE). The susceptor temperature, reactant partial pressures, as well as the flow and flush duration for each precursor are crucial process variables for ALE growth. Growth was carried out for 20–25 cycles under different sets of these process conditions during the experiment and in-situ SE was used to verify the presence of layer-by-layer growth, which enabled the quick determination of the process window. We observed ALE growth of CdTe at 300°C, supporting the explanation that the growth of CdTe occurs via a surface catalyzed decomposition of the Te precursor di-isopropyltelluride (DIPTe). Investigation of ALE mode growth behavior for different susceptor temperatures and DIPTe flush times indicated that the growth was limited by competition between desorption and reaction of the adsorbed DIPTe species on the Cd terminated surface.     

格栅式水泥搅拌桩支护在西涌泵站的应用

简介水泥搅拌桩的支护机理,以西涌泵站为例介绍采用格栅式水泥搅拌桩作支护结构的设计及计算方法,指出该技术能较好地解决软湿粘性土地区枢纽深基础开挖问题.