产教融合背景下高职特色专业群“平台+模块”课程体系建设研究

In view of the problems in the construction of characteristic professional groups in higher vocational colleges, the professional group of "intelligent manufacturing" is taken as the research object, and the "platform + module" suitable for the development of the industry will be constructed according to the content of the vocational ability planning courses of the post group. The curriculum system establishes the framework of professional groups, and explores and forms a strategic study to optimize and integrate professional group resources.     

A comparative study for consistency-based decision making with interval multiplicative preference relations

ABSTRACT

To ensure the reasonable application and perfect the theory of decision making with interval multiplicative preference relations (IMPRs), this paper continues to discuss decision making with IMPRs. After reviewing previous consistency concepts for IMPRs, we find that Krej?í’s consistency concept is more flexible and natural than others. However, it is insufficient to address IMPRs only using this concept. Considering this fact, this paper researches inconsistent and incomplete IMPRs that are usually encountered. First, programming models for addressing inconsistent and incomplete IMPRs are constructed. Then, this paper studies the consensus of individual IMPRs and defines a consensus index using the defined correlation coefficient. When the consensus requirement does not satisfy requirement, a programming model for improving consensus level is built, which can ensure the consistency. Subsequently, a procedure for group decision making with IMPRs is offered, and associated examples are provided to specifically show the application of main theoretical results.     

An efficient NFEM for optimal control problems governed by a bilinear state equation

In this paper, a nonconforming finite element method (NFEM) is proposed for the constrained optimal control problems (OCPs) governed by a bilinear state equation. The state and adjoint state are approximated by the nonconforming $E{Q}_1^{rot}$ element, and the control is approximated by the orthogonal projection through the state and adjoint state. Some superclose and superconvergence properties are obtained by full use of the distinguish characters of this $E{Q}_1^{rot}$ element, such as the interpolation operator equals the Ritz projection, and the consistency error is one order higher than its interpolation error in the broken energy norm. Finally, some numerical results are provided to verify the theoretical analysis.     

Dialogic weaving: a favorable tension between design and craft

Focusing on a process where a designer embeds herself in craftspeople’s workshops with the intention of ‘learning from inside’ and ‘making together’; this paper proposes pathways for considering collaboration between designers and craftspeople via digital fabrication and weaving. The tension of forces that make weaving possible, act as an analogy for this collaboration as well as providing the title of the project as ‘One Over, One Under’. The project proposes a mode of working and a spectrum of outcomes where the designer has a first-hand experience of production techniques, engages in a serious and continuous dialogue through making, and develops an intervention that also brings forth her own skill set (introducing digital fabrication and structural variations), thus transforming the conventions and boundaries between established roles and manufacturing techniques. An experiment that resulted in a series of objects considering both the technologies of production and the input of the designer, this process not only increases the potentials that crafts hold for the field of design, but it also offers possibilities of collaboration and a further articulation of the design act.     

A comparison study into low leak rate buoyant gas dispersion in a small fuel cell enclosure using plain and louvre vent passive ventilation schemes

Hydrogen, producing electricity in fuel cells, is a versatile energy source, but with risks associated with flammability. Fuel cells use enclosures for protection which need ventilating to remove hydrogen emitted during normal operation or from supply system leaks. Passive ventilation, using buoyancy driven flow is preferred to mechanical systems. Performance depends upon vent design, size, shape, position and number. Vents are usually plain rectangular openings, but environmentally situated enclosures use louvres for protection. The effect of louvres on passive ventilation is not clear and has therefore been examined in this paper. Comparison ‘same opening area’ louvre and plain vent tests were undertaken using a 0.144 m³ enclosure with opposing upper and lower vents and helium leaking from a 4 mm nozzle on the base at rates from 1 to 10 lpm, simulating a hydrogen leak. Louvres increased stratified level helium concentrations by typically in excess of 15%. The empirical data obtained was also used in a validation exercise with a SolidWorks: Flow Simulation CFD model, which provided a good qualitative representation of flow behaviour and close empirical data correlations.     

Effects of Sr2+ substitution on the crystal structure,Raman spectra,bond valence and microwave dielectric properties of Ba3-xSrx(VO4)2 solid solutions

The effects of Sr²⁺ substitution for Ba²⁺ on microwave dielectric properties and crystal structure of Ba_3-xSr_x(VO₄)₂ (0 ≤ x ≤ 3, BSVO) solid solution were investigated. Such Sr²⁺ substitution contributes to significant reduction in sintering temperature from 1400 °C to 1150 °C. Both permittivity (∑_r) and quality factor (Q × f) values decreased with increasing x value, which was determined to be related with the descending values of average polarizability and packing fraction, whereas the increase in τ_f value was explained by the decreased average VO bond length, A-site bond valence. BSVO ceramics possessed encouraging dielectric performances with ∑_r = 12.2–15.6 ± 0.1, Q × f = 44,340 - 62,000 ± 800 GHz, and τ_f = 24.5–64.5 ± 0.2 ppm/°C. Low-temperature sintering was manipulated by adding B₂O₃ as sintering additive for the representative Sr₃V₂O₈ (SVO) ceramic and only 1 wt.% B₂O₃ addition successfully contributed to a 21.7% decrease in sintering temperature to 900 °C, showing good chemical compatibility with silver electrodes, which render BSVO series and SVO ceramics potential candidates in multilayer electronic devices fabrication.     

The co-location of innovation and production in clusters

ABSTRACT

This paper quantifies the extent of co-location of innovation and production for industry clusters with varying knowledge intensity. If input-output, knowledge, and skill linkages are interdependent and geographically bounded, then we would expect innovation and production to be co-located in regional clusters. However, theory predicts that the degree of agglomeration benefits associated with co-location may vary across economic activities with different knowledge intensity. Using data from the U.S. Cluster Mapping Project, I develop measures of the co-location of innovation and production for 27 industry clusters, examining patterns across regions and over time (1998–2015) in the United States. I find that there is a significant co-location of innovation and production for many clusters, especially for those with higher knowledge intensity. This paper focuses on the Information Technology and Analytical Instruments cluster and the Automotive cluster to illustrate the co-location measures and the micro-geography of innovation and production.