水轮机电液调速器人工失灵区的分析计算

本文对电液调速器的人工失灵区电路进行定量分析，导出了失灵区的一套计算公式，并指出失灵区与调差率、功率偏差的内在关系。     

煤粉性状对残炭颗粒微结构及其燃烧特性的影响

本文研究了不同粒主工的烟煤和无烟煤经高温气流燃烧后残炭颗粒的形态及孔隙结构，对其燃烧方式和燃尽特性进行了讨论，并比较了两种煤的差别。结果表明，由镜质组形成的残炭表面和内部同时燃烧，并比较了两种煤的差别。结果表明，由镜质组形成的球残炭表面和内部时燃烧，容易燃尽；由惰性组形成的不规则残炭以外部反应为主，较难燃尽，同无烟煤相比，烟煤残炭孔隙多，燃烧剧列，且孔穴内部燃烧所占比重更大。     

Precipitation behavior of σ phase in fusion zone of dissimilar stainless steel welds during multi-pass GTAW process

The purpose of this study is to investigate the precipitation characteristics of σ phase in the fusion zone of stainless steel welds at various welding passes during a tungsten are welding (GTAW) process. The morphology, quantity, and chemical composition of the δ-ferrite and σ phase were analyzed using optical microscopy (OM), a ferritscope (FS), a X-ray diffractometer (XRD), scanning electron microscopy (SEM), an electron probe micro-analyzer (EPMA), and a wavelength dispersive spectrometer (WDS), respectively. Massive δ-ferrite was observed in the fusion zone of the first pass welds during welding of dissimilar stainless steels. The σ phase precipitated at the inner δ-ferrite particles and decreased δ-ferrite content during the third pass welding. The σ and δ phases can be stabilized by Si element, which promoted the phase transformation of σ→ϱ+λ₂ in the fusion zone of the third pass welds. It was found that the σ phase was a Fe−Cr−Si intermetallic compound found in the fusion zone of the third pass welds during multi-pass welding.     

乙烯裂解炉辐射段流动与燃烧的三维数值模拟

用计算流体力学软件Fluent6.2对中国石油化工股份有限公司燕山分公司E-BA-107乙烯裂解炉辐射段内的流动和燃烧做了三维数值模拟研究。为保证计算的准确性,使用GAMBIT2.2软件建立了与裂解炉实际尺寸完全一致的几何模型;在计算过程中采用了标准k-ε湍流模型、离散坐标辐射模型和有限速率/涡流耗散燃烧反应模型等计算模型。通过模拟计算得到了裂解炉炉膛内的温度、烟气流速及烟气组成的分布:底部燃烧器和侧壁燃烧器的燃烧使附近的炉墙处于温度分布均匀的高温区,为裂解反应提供了均匀的辐射墙面;炉管底部比其他部位的温度低;底部燃烧器的高速射流产生的旋涡可为炉管提供一定的对流热;出口烟气的平均温度和组成的模拟计算值与设计值接近,表明数值模拟有较高的精度,具有实际意义。     

矫直状态下钢管弹塑性变形区的研究

根据钢管矫直时的变形规律，通过对矫直中钢管的力学状态及矫直前后的状态参数分析，建立了一种适于现场应用的确定钢管弹、塑性变形区的新方法。     

全断面双护盾掘进机在引黄工程断层破碎带的卡机处理

万家寨引黄工程国际Ⅱ、Ⅲ标已查明的断层有34条，隐伏断层可能还有一些，除了利民堡区域性大断层（F32）外，较大的集中于7#洞北段59＋700—68＋820，主要有F65、F70、F90、F74。全断面双护盾掘进机适应于较复杂的地质条件，因此在通过断层破碎带时一般都较正常。但在通过引黄工程区域性大断层F65时，发生了卡机事故，处理用了3个月时间。该文对处理TBM卡机事故的施工进行了总结。     

燃气不换向蓄热式熔铝炉

蓄热式熔铝炉是一项先进节能技术，但至今在铝行业普及率不高，主要是一次性投资较大，维修费用较高。新近开发的燃气不换向蓄热式烧嘴，设备投资少、系统简化、设备故障少，使用安全可靠。     

标准型直燃机在严寒地区应用探讨

介绍了标准型直燃机的分类、原理及长庆至呼和浩特输气管道工程冷冻供热站的设计实例 ,重点论述了标准型直燃机在严寒地区使用的利弊     

PROPAGATION OF GASLESS COMBUSTION FRONTS: NONZERO REACTION RATE IN THE WHOLE DOMAIN

This paper deals with the gasless combustion problem in an infinite one-dimensional medium. The possibility of the existence of steadily propagating reaction waves is stated for system models with nonzero reaction rates everywhere but at the boundaries. Two forms for the chemical reaction rate dependence on the temperature are considered: the classical Arrhenius, and a modified Arrhenius incorporating and ignition temperature. The equations for the steadily propagating waves are studied in the phase-plane of the temperature and its derivative. The analysis first addresses the question of whether steadily propagating waves are admissible. Then bounds for the propagation velocity are sought and found. The results of the closed-form analysis are successfully tested against numerical experiments. Non-steady propagation regimes are also found, and regions in the parameter space associated with different asymptotic dynamical behaviour are identified.     

渤海湾盆地复式油气聚集带高勘探程度区进一步挖潜的领域

渤海湾盆地复式油气聚集区经过了40年的勘探,目前已进入了高勘探程度区.油气聚集的复杂规律表明,渤海湾盆地仍具有巨大的资源潜力,进一步挖潜的领域非常广阔.以第三系为烃源岩的含油气层系的勘探精度仍有待于进一步提高,同时必须将以古生界、中生界和中上元古界为烃源岩的含油气层系作为今后挖潜的重要领域.渤海湾盆地任何层系都可能形成和聚集油气,因此仍有多种复杂的油气藏类型尚待进一步认识和发现.