TJ10—74与GBJ10—89规范受弯构件正截面抗力转换系数

分析了 TJ10—74规范受弯构件正截面诸修订因素(砼强度“双改方案”、设计表达式、正截面计算方法……).在此基础上推演出 TJ10—74与GBJ10—89两规范关于受弯构件抗力转换系数.可供结构设计使用.     

β—BBO晶体的电光性能

用干涉法测量了β－ＢＢＯ晶体的电光系数：γ２２＝２．６，γ３３＝０．２３，γ３１＝０．２５，γ５１＝－３．５×１０－１２ｍ／Ｖ。结果表明如果在Ｙ方向加电场，Ｚ方向通光，β—ＢＢＯ晶体可能制作成有应用价值的光开关。     

基底元素表面富集与扩散阻档层

根据An－Ag系统以及An－Cu系统的扩散系数计算，提出了扩散阻挡层模型。利用这个模型对Au－Ag系统进行有关实验，得利了较好的验证。     

Calculation of second virial coefficients and gaseous viscosities of the refrigerants HFC-32 (CH2 F2), HFC-23 (CHF3), and HCFC-22 (CHC1F2)

The second virial coefficients of refrigerants HFC-32 (CH₂F₂), HFC-23 (CHF₃), and HCFC-22 (CHC1F₂) have been correlated on the bisis of site site model potential and have been compared with experimental results. The molecular interactions consisted of repulsion dispersion and electrostatic parts. From the site site potentials adjusted to the experimental second virial coefficients, spherically averaged potentials have been determined and a subsequent calculation of gaseous viscosity has been carried out. Agreement between measured and calculated values of second virial coellicients and gaseous viscosity is satisfactory. Calculated values of second virial coefficients and gaseous viscosity beyond available experimental data, therefore. can be assumed as a reliable extrapolation to lower and higher temperatures.     

Vapor-phase viscosity of phenol

New measurements of the vapor-phase viscosity of phenol were performed from 437 up to 624 K and for densities between 0.006 and 0.023 mol · L^–1 in an all-quartz oscillating-disk viscometer with small gaps. Thus, including our own measurements reported earlier, experimental data are available in the temperature range between 376 and 639 K and in the density range from 0.001 up to 0.023 mol · L^–1. The data were evaluated with a density series for the viscosity in which only a linear density contribution is included. The values of the second viscosity virial coefficient obtained for phenol as well as for benzene, toluene, and p-xylene were compared with results of the Rainwater-Friend theory and of the modified Enskog theory on the basis of the Lennard-Jones 12-6 potential. The agreement is reasonable, when the potential parameter ratios determined by Bich and Vogel are used. The influence of bound dimers seems to be already taken into account in the three-monomer contribution according to Hoffman and Curtiss.Paper dedicated to Professor Joseph Kestin.     

聚醚合成工业齿轮油的研制

以聚醚为基础油辅以抗磨剂、抗氧剂、防锈剂等多种添加剂研制而成的KGW聚醚合成工业齿轮油具有优异的黏温性能和低温性能，优异的极压抗磨性，极优的减摩性能，可满足高负荷、强冲击等苛刻条件下各类齿轮传动装置的润滑要求。该系列产品达到国外同类油品质量水平。     

Comments on the shortcomings of predicting the precision of Cavalieri volume estimates based upon assumed measurement functions

It is well known that the estimation of an object's volume by means of serial cross-sections, the so-called Cavalieri method, yields an unbiased estimate. But by itself it provides no means by which to estimate how precise this estimate is unless the shape of the volume is fully known beforehand. This knowledge can only be partially determined from the serial section information that is collected. Methods have been developed that claim to surmount this difficulty by using the serial section data to create a mathematical model of the volume's shape properties. The model then is used to estimate (predict) the precision of the volume estimate (its CE) from the single set of data available. Unfortunately, the theory underlying the model is flawed and so the model itself amounts to no more than an unsubstantiated guess about the shape of the volume. Therefore, the precision of the volume estimates that one obtains from the method is only as good as the model and this cannot be ascertained from the single set of acquired data. In this letter I explain the inadequacies of the modelling method. I suggest that it be used only with caution, if at all. Instead I suggest two alternative ways to predict the CE, one that is based upon a rule-of-thumb approach to the object's shape, and another that is based upon spectral analysis of the measurement function and that is easy to implement with available computer software.     

海洋石油开发工业污染物产生系数和排放系数研究

污染物产生系数和排放系数是工程环境影响评价的重要指标,但对于海洋石油开发工程环境影响评价来说,迄今尚无具权威性的系数可资使用。在我国近海石油开发工程污染源系统调查的基础上,对海洋石油开发行业污染物产生系数和排放系数的定义、计算方法、应用范围及应用方式进行了探讨,研究结果可为海洋石油开发工程项目环境影响评价及环境保护管理,以及行业或企业有关标准的制定提供参考。     

一维弹道修正模块设计与仿真

简要介绍了一种用于维弹道修正引信的执行机构。通过数学模型，结合MDT三机械设计软件和Working Model动力学仿真软件，对机构的受力情况和工作过程进行了数字仿真和系统分析，并通过对飞行弹道的模拟，得出了一维时间控制射程修正规律。     

谐振式力传感器敏感结构的研究

利用材料力学及弹性力学法，对石英晶体谐振式力传感器的悬臂梁结构进行了研究，得出了双梁单岛及三梁单岛悬臂梁结构的力转移系数，在与实验结果进行了比较后证明，支承结构的理论推导与实验结果一致。