智能化劳厄定向法

提出了晶体劳厄定向的智能化方法；简述了有关的Ｘ射线衍射理论、数学模型和运行步骤；讨论了该方法的可靠性和实用性．     

Synthesis,Properties, and Photopolymerization of Liquid‐Crystalline Oxetanes: Application in Transflective Liquid‐Crystal Displays

Mixtures of liquid‐crystalline di‐oxetanes and mono‐oxetanes are made for the purpose of making birefringent films by photopolymerization. The composition of a di‐oxetane mixture that forms spin‐coated films of planarly aligned nematic monomers is reported. These films are photopolymerized in air. The molecular order of the monomers can be changed on the microscale to form thin films with alternating birefringent and isotropic parts by using a combination of photopolymerization and heating. The interface observed between the birefringent and isotropic 10 μm × 10 μm domains is very sharp and the films show hardly any surface corrugation. In addition, the polymerized films are thermally stable, making them very suitable for use as patterned thin‐film retarders in high‐performance transflective liquid‐crystal displays (LCDs) which satisfy customer demand for displays that are brighter and thinner and that deliver better optical performance than conventional LCDs with an external non‐patterned retarder.     

Effects of α‐form or β‐form nuclei on polymorphic crystalline morphology of poly(butylene adipate)

The effects of α‐form and β‐form nuclei on polymorphic morphology of poly(butylene adipate) (PBA) upon recrystallization from the molten state up to various T_max values were examined by differential scanning calorimetry (DSC), wide‐angle X‐ray diffraction (WAXD) and polarized light microscopy (PLM). In this study, PBA with complex melting and polymorphism behaviour was used as a model for examining different types and extents of residual nuclei. As the PBA initially containing the sole α‐crystal was brought to a molten state of various T_max, the extents of trace α‐form crystal nuclei varied and were dependent on T_max. Furthermore, it did not matter whether, initially, the PBA contained α‐ or β‐form crystals (or both) because only a single type of α‐nuclei could be left upon treatment to the molten liquid state at T_max. Therefore, only the α‐crystal in PBA had ‘memory capacity’ in the molten liquid state while the β‐crystal did not. This was so because the latter had been completely transformed into the solid state prior to being heated into a liquid. PBA crystallized before α‐nuclei could be packed into α‐crystal, regardless of the crystallization temperature (T_c). For recrystallization from molten PBA without any nuclei, the crystalline polymorphism was correspondingly influenced by T_c. Copyright © 2005 Society of Chemical Industry     

Adsorption and decomposition of H2S on Pd(1 1 1) surface: a first-principles study

Gradient-corrected density functional theory was used to investigate the adsorption of H₂S on Pd(1 1 1) surface. Molecular adsorption was found to be stable with H₂S binding preferentially at top sites. In addition, the adsorption of other S moieties (SH and S) was investigated. SH and S were found to be preferentially bind at the bridge and fcc sites, respectively. The reaction pathways and energy profiles for H₂S decomposition giving rise to adsorbed S and H were determined. Both H₂S_(ad) → SH_(ad) + H_(ad) and SH_(ad) → S_(ad) + H_(ad) reactions were found to have low barriers and high exothermicities. This reveals that the decomposition of H₂S on Pd(1 1 1) surface is a facile process.     

Irradiation Defects in Silicon Crystal

The application of irradiation in silicon crystal is introduced.The defects caused by irradiation are reviewed and some major ways of studying defects in irradiated silicon are summarized.Furthermore the problems in the investigation of irradiated silicon are discussed as well as its properties.     

AP的安全制备（英）

1 IntroductionThe ammonium perchlorate ( AP)-based compositepropellant is currently the most widely used one becausethis propellant has good burning characteristics and me-chanical properties. One of the few serious drawbacks ofthe AP-based propellant is that its products of combus-tion, which include HCl, chlorine, and chlorine oxides,cause atmospheric pollution. Increasing concern for aclean atmosphere in recent years has resulted in a com-pelling need for developing a chlorine-free,enviro…     

Nd3+ Doped Silicate Glass Photonic Crystal Fiber with Random Hole Distributions

The fabrication of one kind of large core area Nd3 doped silicate glass photonic crystal fiber, and demonstration of the fiber's waveguidence properties were reported. This fiber owns a random air hole distribution in the cladding. The measured minimum loss of this kind of fiber is 10 dB·m-1 at 660 nm. These fibers can sustain only a single mode at least over wavelength ranging from 660 nm to 980 nm.     

Effects of weak shear on hyperswollen lyotropic smectic liquid crystals

We have developed a Zimm-type viscometer specially designed for the simultaneous measurements of the structure factor and the viscosity of hyperswollen lyotropic liquid crystals under a very weak shear. We have investigated the shear effects on the layer undulation fluctuation in the lamellar structure and the transition from the anisotropic lamellar to the isotropic sponge phase. We have found a significant difference in the rheological properties between the lamellar and the sponge phase: The former exhibits non-Newtonian flow behavior, while the latter exhibits Newtonian behavior.Paper presented at the Twelfth Symposium on Thermophysical Properties, June 19–24, 1994, Boulder, Colorado, U.S.A.     

Investigations of ultrathin polypyrrole films: Formation and effects of doping/dedoping processes on its optical properties by electrochemical surface plasmon resonance (ESPR)

In the present work an investigation of the effects of the electropolymerization mode on the optical properties associated to the doping/dedoping processes of nanometric films of polypyrrole (PPy) is reported, monitoring in situ and in real time using simultaneously surface plasmon resonance and electrochemical techniques (ESPR). The electropolymerization of pyrrole was performed by potentiostatic, potentiodynamic and galvanostatic methods and the use of the ESPR technique showed that the electropolymerization mode is essential to the stability of polymer and the reversibility of its optical properties during the doping and dedoping processes. Thus, the optical properties of oxidized and reduced film were obtained by nonlinear least square fitting using Fresnel equations for a four-layer system. Then, the values of the real and imaginary parts of the complex dielectric constant for PPy fims were correlated with the polymer doping level. Finally, quartz crystal microbalance measurements were also applied to obtain correlation between doping/dedoping processes and the changes in the real and imaginary parts of the dielectric constant of the polypyrrole film, showing that the doping and dedoping processes in the polypyrrole film can act directly on its optical properties while the ESPR technique can give the same information indirectly.