Synthesis and properties of star-like wholly aromatic polyester fibers

Novel star-like wholly aromatic copolyesters having four arms based on a tetraamine star core, p- and m- hydroxybenzoic acids and 6-hydroxy-2-naphthoic acid have been successfully synthesized and spun into fibers for the investigation of the effect of the star-like structure on improving compressive properties of the fiber. The reactivity of the star core was demonstrated using a model compound with FTIR, ¹H and ¹³C NMR spectroscopy. The ¹³C NMR spectrum of the star-like terpolymer having a molar ratio of 10:1 of the monomers to star core showed a characteristic peak at around δ62 ppm which corresponds to a tetra-substituted carbon and thereby demonstrates that the star core was really incorporated into the polymer. The star-like copolyester exhibited a clear stir opalescence and liquid crystalline morphology in the temperature range of 150-280 °C. However, no transition was observed in the DSC thermogram except a clear T_g at 110 °C. The star-like terpolymer fiber, prepared from a polymer with a molar ratio of 500:1 for the monomers to imide core, was spun in the liquid crystalline state at 180 °C. Fiber structure and properties have been studied.     

苏北及邻区前志留基础层的综合地球物理研究

在前新生代油气资源选区评价中，前志留面之下未变质沉积地层（简称前志留基础层）的分布具有重要的参考价值。从提高纵向分辨率的处理和反演技术的应用入手，结合约束条件,利用大地电磁测深数据反演,揭示前志留面等界面的埋深和分布；同时应用小波分析技术，从磁场中分解出区域磁异常，反演结晶基底的埋深。通过这2个界面埋深的差异来分析前志留基础层的分布     

电控平行排列液晶光栅的光衍射特性研究

对电控平行液晶光栅的理论进行了分析,并配以结构原理图。通过对平行排列及90°扭曲排列液晶指向矢的计算,得出液晶盒中相应的折射率、相位差与电压之间的关系图,两者经比较证明平行排列更具适用性,并在实验中观测到了平行排列液晶光栅衍射特性与电压的关系。     

棒状液晶分子相变问题的机械旋转模型研究

综述一种关于棒状液晶材料的分子结构与液晶相的相关关系的研究成果。介绍了有关液晶分子的机械旋转模型。该模型将液晶分子视作一种高速旋转的转子,通过分子参数计算,对液晶材料的相变温度和分子结构之间的关系给出了一种全新的解释。最新研究表明,含氟三苯液晶材料的分子结构中存在slim和fat现象,能够对液晶材料的相变进行合理解释。该模型能够通过简单的模型方法对新型液晶材料的分子设计与合成提供有用的信息。     

The interfacial microstructure of joined single crystal and polycrystalline alumina

The interfacial microstructures of 96 and 98% polycrystalline alumina joined with single crystal sapphire have been investigated in relation to the joining parameters. Joining has been evaluated based on either using a thin spin-on silica interlayer or by placing the alumina and sapphire in direct contact. The materials were joined by placing the coated or uncoated surfaces in contact and heating in the range of 1340–1475 °C with minimum external load. With the aid of a silica interlayer, sapphire and 98% polycrystalline alumina were successfully joined in 180 min at 1400 °C and above, while samples without a silica interlayer failed to join under these conditions. However, sapphire and 96% polycrystalline alumina were joined both with and without the use of silica interlayer. A variety of interfacial morphologies have been observed, including amorphous regions, fine crystalline alumina, and intimate contact between the sapphire and polycrystalline alumina.     

低掺杂浓度Nd:YVO4激光器的输出特性研究

在对Nd:YVO_4晶体的掺杂浓度和晶体长度对激光器性能的影响进行了分析后,报道了利用掺杂浓度为0.3at％,通光长度为10mm的Nd:YVO_4晶体作为增益介质,带光纤耦合的激光二极管端面抽运的Nd:YVO_4激光器。在抽运功率为27.365W时,获得了14.85W的TEM_(00)模输出,光一光转换效率为60.49％,斜效率达64.5％。     

Structure of rapidly solidified aluminum alloys

This paper is a summary of an extensive research program carried out by the authors on the structure of rapidly solidified aluminum alloys; and a comparison with the work of others also involved in this field. The paper discusses the changes in the dendritic and non-dendritic structure of the matrix at cooling rates from 10^–3 to 10¹⁰ K/s and discusses the hetergeneity of the structure caused by interdendritic-segretion during solidification.     

钒酸钇晶体及其在光纤通信中的应用

钒酸钇（YVO4）晶体具有良好的机械和物理特性，近年在光纤通信器件制造生产中得到了广泛的应用。本文介绍了基于YVO4晶体为材料的隔离器、环行器和交叉波分复用的功能及其原理结构。     

单晶高温合金DD3亚结构超细化定向凝固工艺研究EI

利用ＺＭ定向凝固装置研究了镍基单晶高温合金ＤＤ３在高温度梯度（７００～１２００Ｋ／ｃｍ）定向凝固条件下的微观组织演化特征及其对工艺参数的响应函数，结果表明：该合金在高界面温度梯度条件下，柱晶生长速度范围向高速区扩展，从而使单晶亚结构细化成为可能。所得单晶棒中亚结构一次间距可比传统ＨＲＳ法定向凝固籽晶中相应尺度减小５～１０倍。本文还对其组织演化机制进行了分析。     

Crystallization of glass in fireclay refractories; part III: Detailed study on the mullite crystal size in the ‘synthetic’ glass

Poor-grade fireclay products contain substantial amount of glass. A glass of similar composition was synthesized, nucleated and heat-treated for crystallization of mullite. The size and size-distribution of mullite crystals, the rate of change of size and the aspect ratio of the crystals were investigated in relation to the nucleating agents and temperature.