Film morphology and reaction rate for the CVD of tungsten by the WF6—SiH4 reaction

Journal of Electronic Materials - Low pressure chemical vapor deposition (LPCVD) of tungsten (W) by SiH4 reduction of WF6 on Si(100) surfaces was studied in a single-wafer, cold-wall reactor over a...     

定向结晶时高温合金组织控制的工艺前景EI

报道了俄国航空材料研究院(ВИАМ)在定向单晶高温合金组织控制方面的最新研究成果,例如,利用高速定向结晶工艺创造具有单晶组织的宽弦叶片,以及制造前后缘为规定位相的单晶,而在叶身中部为细柱状定向结晶组织的复合组织叶片。这些新工艺提高了材料的工作能力和发动机寿命。     

溶胶-凝胶法制备(Sr,Pb)TiO3纳米晶粉及表征

采用溶胶－凝胶法成功地合成了（Sr,Pb)TiO3纳米晶粉，并利用FTIR技术对凝胶的形成过程及350℃，1．5h煅烧获得的粉体材料进行了表征。实验以TG－DSC分析作为拟定煅烧温度的依据，以XRD作为煅烧产物的分析手段，最佳煅烧温度为600℃，所合成的（Sr,Pb)TiO3纳米晶粉的平均晶粒尺寸约为21nm，属钙钛矿型立方顺电相结构。     

Analysis of polarization plane rotation characteristic in 2D photonic crystal waveguide with chiral medium by condensed node spatial network

Using the photonic band gap in photonic crystals, the fundamental waveguide structures for the light wavelength range have been developed. Based on the fine structure of these many functional devices have been proposed by analytical or numerical simulation methods and the experiments of trial manufacture. In this paper, the treatment of chiral dielectric in the Condensed Node Spatial Network for the vector potential is explained, and we show the polarization plane rotation property in air‐hole and pillar type photonic crystal waveguide structures with the chiral medium substrate. Then, we show the fundamental advantage of the air‐hole type photonic crystal waveguide structure in application to a mode converter. © 2005 Wiley Periodicals, Inc. Electr Eng Jpn, 152(1): 7–14, 2005; Published online in Wiley InterScience ( www.interscience. wiley.com ). DOI 10.1002/eej.20098     

诱导结晶条件下硅酸盐水泥熟料形成动力学的研究

根据诱导结晶的原理，我们提出了用已烧好的同类优质熟料作为晶种，诱导水泥烧成过程中的矿物形成。用掺与不掺对比的方法，利用现代物理、化学手段进行了研究。结果表明：明显提高了生料的易烧性；使ｆ－ＣａＯ明显下降；水泥熟料形成的活化能降低；刚分解的ＣａＯ在晶种表面富集；加快了各个阶段的固相反应；加快了熟料矿物形民；熟料矿物质量有所提高；并使ｆ－ＣａＯ的结构特征上发生了易于消解的变化。     

Sidechain liquid crystal polymers

Research has continued in the field sidechain liquid crystal polymers over recent years, but it is becoming clearer that this research is being directed away from the traditional technology areas of electro-optic devices and researchers are developing new and exciting applications for this novel state of matter.     

汽相平衡扩散时LiNbO_3晶体的改性

本文从ＬｉＮｂＯ３晶体的宽固溶特性出发，采用汽相平衡扩散（ＶＴＥ）方法，摸索出具体改善ＬｉＮｂＯ３组成的实验条件，研制出用于扩散的扩散源坩埚，对一系列同成分ＬｉＮｂＯ３晶体进行了改性研究，结果表明，经本方法处理的ＬｉＮｂＯ３晶体的均匀性、一致性得到大大的提高，并获得了均匀富锂的ＬｉＮｂＯ３晶体，能够很好地满足集成光学需要．     

POM晶体倍频相位匹配角的设计及应用

计算了新型有机晶体ＰＯＭ的倍频匹配角，并将ＰＯＭ作为倍频器件用于超短光脉冲的测量中。     

石英晶体振荡器的微处理器温度补偿技术研究

为改善石英晶体振荡器的频率特性,减小温度影响,通过对石英晶体振荡器的频率-温度特性的研究,提出了以微处理器（STC89C52RC）为核心的基于AT切晶体谐振器的温度补偿技术,并介绍了系统结构、补偿原理及硬件电路,给出了补偿结果。本设计具有结构简单、功耗低等优点。