燃气加热托辊型网带炉生产线的研制与应用

介绍了燃气加热托辊型网带炉生产线的组成、燃气脉冲控制和空气/燃气比例连续调节技术和计算机多媒体集散控制系统.生产应用表明炉温均匀性良好,处理产品质量稳定,能耗成本降低,取得了明显的经济效益.     

N-甲酰吗啉芳烃抽提塔试验研究

用小型碳钢筛板萃取塔进行了宽馏分重整脱庚烷油的N 甲酰吗啉抽提试验 ,考察了抽提温度、溶剂比、溶剂含水率对总芳烃收率及选择性的影响。结果表明 ,在抽提温度为 60℃、溶剂含水为 3 % (m )和溶剂比S/F =4(V)的抽提操作条件下 ,溶剂选择性较高 ,并可获得高的芳烃回收率     

TESTING CHANGE-POINTS IN THE EXPLOSIVE GAUSSIAN AUTOREGRESSIVE PROCESSES

Abstract. A functional limit theorem with a particular function class and topology is derived for non-ergodic type time series. This limit theorem allows us to study the asymptotic law of the associated likelihood ratio test (LRT) statistic for testing the presence of a change in the covariance parameter in the explosive Gaussian autoregressive model. We show that the level of the LRT cannot be approximated without introducing appropriate normalization. The limit law of a particular weighted likelihood ratio test is examined through a simulation study and is compared with the well-known Kolmogorov distribution obtained in the stationary case; we conclude that for practical applications when the root is really close to unity one can use the same thresholds as in the stationary case. This procedure is applied to the study of three real time series known to be non-stationary.     

Mercury transformation across particulate control devices in six power plants of China: The co-effect of chlorine and ash composition

This paper presents the results of field measurements on mercury speciation in six power plants of China by applying the Ontario hydro method. During the tests, flue gas was sampled simultaneously before and after particulate control devices (electrostatic precipitator and fabric filter baghouse) along with the pulverized coal, bottom ash and fly ash sampling. The amount of oxidized mercury in gas phase before and after ESP/FF suggests that mercury oxidation after combustion is a kinetically controlled process. The comparison of mercury speciation in different power plant indicates a clear relationship with coal type, especially the chlorine concentration and the basic ash compositions in coal. Both of the factors are analyzed quantitatively in this study. A new parameter C (ratio of chlorine in coal to base/acid ratio) has been introduced to evaluate the co-effect of the two factors above on mercury speciation.     

改性BMI微孔轴承保持器材料研究

采用改性双马来酰亚胺树脂制备微孔轴承保持器材料，探讨了制备工艺和最佳工艺参数，得到性能优良的改性双马来酰亚胺微孔轴在保持器材料。     

CO气氛中液相催化COS水解活性的研究

在鼓泡反应器中，采用液相催化剂，对高浓度CO气氛中高浓度COS的水解反应进行考察，研究催化剂浓度、气液体积比、温度的变化对COS水解转化率及催化体系稳定性的影响，得出最佳工艺条件，并对反应机理进行初步探讨。结果表明,COS水解转化率随气液体积比增大而降低，随催化剂浓度增大而升高；在常温、常压和气液体积比为150 h^－1的条件下，质量分数为10%的催化剂水溶液中COS的水解转化率可达100%，连续使用20 h转化率不变。     

板式精馏塔实验性能测试

本文对废液中低浓度乙醇的回收再利用进行了研究,主要对低浓度乙醇精馏过程中的不同实验条件进行了初探,得出了塔釜加热电压,塔釜液浓度,回流比等实验条件与塔顶产品浓度之间的关系,并用计算机绘制了图表,确定一组最优的实验条件。     

Characterisation of mortar morphology in thin sections by digital image processing

A digital imaging approach was applied to investigate mortar morphology in thin sections; in particular, the binder/aggregate ratio and the grading curve of five mortar bars were attained by digital image processing (DIP), using the Image Pro Plus 4.1 software package. The imaging procedure employed image segmentation, to extract mortar aggregate, and image filtering, to fix grain boundaries. The results show that digital image processing may be considered as an alternative method to mechanical sieving for the characterisation of mortar morphology, as it appears to be quicker and more accurate than the traditional method. However, digital image processing exhibits limits, which are discussed in the text.     

石化企业循环水系统的节水运行与管理

围绕工业循环冷却水系统的工艺原理及水质特点，全面分析阐述了石化循环水系统开展节水运行管理的途径方法及其注意事项，天津石化公司乙烯厂在此方面取得了良好的效果。     

正交试验法在PAN原丝纺丝工艺中的应用

利用正交设计方法确定了PAN湿法纺丝过程中影响原丝性能最主要的因素。结果表明 :以计量泵转速、凝固浴温度、负拉伸以及蒸汽拉伸倍数作为考察对象 ,影响原丝性能的最显著因素是蒸汽拉伸倍数 ,其次是负拉伸。以负拉伸、第二拉伸、第三拉伸以及蒸汽拉伸的倍数作为考察对象 ,影响原丝性能最显著的是蒸汽拉伸倍数 ,负拉伸几乎没有影响。利用正交实验结果 ,适当调节蒸汽拉伸倍数 ,制得强度为 6.5～ 7.0cN/dtex ,线密度为 1.1～ 1.3dtex的原丝