基于Client/Server模式的火电厂能损在线监测系统

为了对机组主要设备和系统的运行状态实施在线监测，使机组运行在最佳状态，提高机组的经济性，并加强对能耗指标的管理，而开发了能损在线监测、诊断和能耗指标管理系统，文章对此系统进行了简单的介绍。     

Model for Nanoscopic Domain Formation in Dipalmitoyl-PC/Dilauroyl-PC/Cholesterol Mixture

We describe the lyotropic liquid crystalline phase transitions in the lipid mixture dipalmitoil-PC/dilauroy-PC/cholesterol by 3D spin-1 lattice model. The formation of nanoscale domains with the characteristic size about 300 nm was studied in experiments on confocal fluorescence microscopy (CFM) (G. V. Feigenson and J. T. Buboltz, Biophys. J. 80, 2775 (2001)). The structure parameters of the lamellar vesicle in dipalmitoil-PC-rich phase, corresponding to these regions, are verified by numerical Monte Carlo simulations on the lattice. We point its superconductivity analogy properties at the region of phase stability for composition-dependent nanoscopic region.     

济钢120t转炉二次烟气除尘设计

济钢120t转炉二次烟气除尘设备选用长袋低压脉冲除尘器,风机采用液力偶合器,并设计将加料系统除尘风量直接加入转炉二次烟气除尘系统。系统投产后,每炉钢节电1200kW,烟气排放浓度为47mg/m3,烟气温度在110℃以下。实践证明,该系统具有节能、捕集率高、排放浓度低、自动化程度高等特点。     

Strategic appraisal of energy models for Mozambique

The needs that an energy supply system must meet are constantly changing, due to technological, social and political reasons. Effective energy planning is a dynamic process that is repeated periodically and adjusts to changing conditions. Energy decision makers and planners are no longer able to rely on inductive decision making since they have to investigate the effect of various decision parameters and possible future changes. To help in this process, models have been developed where estimates of future load growth, candidate power plants, fuels and other key factors can be introduced, from which the planners can evaluate decision parameters and the available alternatives. The paper presents the different methodologies and practices that are used by 11 energy models for energy demand forecasting, supply side management and generation expansion planning, demand side management and integrated resource planning. The paper concludes to the presentation of a strategic appraisal of the examined energy models appropriate for energy planning in Mozambique. Three models are proposed for conducting demand forecasting, generation expansion planning and demand side management. Copyright © 2002 John Wiley & Sons, Ltd.     

链条锅炉的节能改造

本文针对株洲硬质合金厂SHL20—13—AII型20t蒸汽链条锅炉存在的问题，进行了节能改造，取得了显著的成效。     

混联法氧化铝生产中熟料窑节能降耗的研究

通过对熟料窑的热工综合测试，分析了熟料窑的能耗组成和影响能耗的关键因素，总结了技术改造带来的经济效益和生产中存在的问题，提出了进一步挖潜降耗的措施。     

Prediction of the energy dissipation rate in ductile crack propagation

In this paper, energy dissipation rate D vs. Δa curves in ductile fracture are predicted using a ‘conversion’ between loads, load‐point displacements and crack lengths predicted by NLEFM and those found in real ELPL propagation. The NLEFM/ELPL link was recently discovered for the DCB testpiece, and we believe it applies to other cracked geometries. The predictions for D agree with experimental results. The model permits a crack tip toughness R(Δa) which rises from J_c and saturates out when (if) steady state propagation is reached after a transient stage in which all tunnelling, crack tip necking and shear lip formation is established. J_R is always greater than the crack tip R(Δa) and continues to rise even after R(Δa) levels off. The analysis is capable of predicting the usual D vs. Δa curves in the literature which have high initial values and fall monotonically to a plateau at large Δa. It also predicts that D curves for CCT testpieces should be higher than those for SENB/CT, as found in practice. The possibility that D curves at some intermediate Δa may dip to a minimum below the levelled‐off value at large Δa is predicted and confirmed by experiment. Recently reported D curves that have smaller initial D than the D‐values after extensive propagation can also be predicted. The testpiece geometry and crack tip R(Δa) conditions required to produce these different‐shaped D vs. Δa curves are established and confirmed by comparison with experiment. The energy dissipation rate D vs. Δa is not a transferable property as it depends on geometry. The material characteristic R(Δa) may be the ‘transferable property’ for scaling problems in ELPL fracture. How it can be deduced from D vs. Δa curves (and by implication, J_R vs. Δa curves) is established.     

网络技术在中州分公司计量管理工作中的应用探讨

本文通过对中州分公司正在考虑建设的信息网建设实际情况，结合山东分公司、广西分公司取得的经验，对计量管理信息网的应用进行了探讨。     

圆盘给料机在韶钢烧结厂的应用

介绍了PDX系列圆盘给料机的结构、性能及其特点，以及该设备在韶钢烧结厂的使用情况，并与老式圆盘给料机进行了比较。     

集团变分法(CVM)及其在合金相图计算中的应用

介绍了集团变分法的集团概率变量、配置熵等统计分析的理论基础及Helmholtz自由能的描述模型.提出了巨势及相对化学势的几何分析理论.讨论了应用集团变分法和巨势分析理论进行相平衡计算的过程,并分析了同结构平衡相图计算的若干实例.