周宁水电站安全性评价工作

安全性评价是一种现代化的管理手段。开展安全性评价可以提高水电站的安全生产管理水平和设备安全稳定运行水平。结合工作实践,介绍了周宁水电站安全性评价工作的实施过程、主要措施和取得的初步成效。     

特低渗透油气藏成岩储集相的定量评价方法

针对陕北斜坡东部特低渗透储层受沉积作用和成岩作用两大因素控制的特点，利用灰色系统理论对成岩储集相进行了研究。分析了成岩作用综合效应及其相应的视压实率、视肢结率、视微孔率、成岩综合系数等定量指标和岩心分析数据，建立了成岩储集相综合评价参数、指标和分析方法。通过在安塞油田低孔隙度特低渗透长6。油藏储层的实际应用，对目的层段开展了Ⅰ，Ⅱ，Ⅲ和Ⅳ类成岩储集相的定量评价和油气富集描述，有机地集成和综合了多种信息，实现了成岩储集相对沉积学、岩石学和成岩作用等特征的综合表征，并划分出有利成岩储集相区域，为指导油田有利含油区块的筛选和开发决策提供了重要依据。     

咪唑封端扩链脲改性环氧树脂E-51/酸酐MTHPA体系性能研究

以端羟基聚环氧丙烷1000，甲苯二异氰酸酯（TDI），2－甲基咪唑为原料，合成了扩链脲TI，利用DSC，动态热机械分析仪DMA，冲击试验机及扫描电镜（SEM）等手段对TI改性的环氧树脂E－51／甲基四氢化邻苯二甲酸酐（MTHPA）固化体系的反应活性，动态力学行为，冲击性能，断裂面形态结构进行了系统研究，结果表明，改性后的E－51／MTHPA体系反应活性明显提高，固化反应峰顶温度较未改性体系降低160℃－200℃，固化反应的表观活化能由未改性体系的160．3kJ/mol降至63kJ/mol-87kJ/mol，同时与未改性体系相比，经过改性的环氧树脂固化体系冲击强度有较大的提高，在TI含量为5％时体系的玻璃化转变温度Ts达到最高，各改性体系冲击断面呈韧性断裂。     

The Challenge of the Market

Identifying markets for new or improved products for minor crops threatened with extinction is one critical component of any strategy intended to enhance prospects for sustainable production and use. Typically, however, activities linked to the sustainability of these commodities avoid addressing questions associated with assessing their commercial potential. After a brief review of this avoidance syndrome, this article presents a sample of practical, low-cost procedures to help evaluate the market prospects and procedures for crops like quinoa, while citing references to other methodological materials covering similar topics.     

Probabilistic analysis of uncertainties in seismic hazard assessment

Sources and current methods of analysis of uncertainty from randomness, fuzziness and ignorance or incomplete knowledge in seismic hazard assessment problem are briefly discussed at beginning; understandings of the authors are then presented in the following order. All three types of uncertainty come from incomplete knowledge. Probabilistic method can be applied to all of them, objective probability for random factors and subjective probability for the other two types of uncertain factors. Discrete subjective probability mass functions for incomplete and fuzzy factors can be obtained from logic-tree and membership functions respectively. Fractile curves may be used to show the scattering of any uncertainty factor, but a unified probabilistic treatment may be applied to any combination of all three types of uncertainty.     

鸡冠咀金矿废水污染预测及控制标准的探讨

本文以鸡冠咀金矿废水污染为例,论述了复杂水环境的预测模式选择和参数确定;并对水质标准进行了探讨;提出了鸡冠咀金矿废水排放的控制标准。     

低乙烯含量抗冲聚丙烯的结构表征

采用二甲苯为溶剂，将不同乙烯含量（５％￣１５％质量）的抗冲聚丙烯用特定程序进行分级，将各样品分为室温下可溶于甲苯和不可溶于甲苯的两部分。使用＾１３Ｃ－ＮＭＲ方法和ＦＴ－ＩＲ方法对各组分进行表征，明确了乙烯链段在聚丙烯链上的分布，并在此基础上提出了产生这种链结构的聚合工艺的特点。     

Dynamic elastic-plastic buckling phenomena in a rod due to axial impact

Dynamic elastic-plastic buckling phenomena which might develop in a rod from an axial impact loading are studied in order to identify the conditions for quasi-static behaviour. A discrete model for dynamic elastic-plastic buckling, which retains the axial and the lateral inertia forces, is proposed, and the relationship between the model parameters and the characteristics of an actual structure is given. Examples of different external loadings and boundary conditions are considered in order to clarify the influence of elastic-plastic axial wave propagation on the buckling process. The critical time for the initiation of buckling is obtained and the post-buckling behaviour of the model is analysed. Particular attention is paid to the role of the striking mass on the characteristics of the buckling process and on the development of the buckling shape. The numerical study reveals that the inertia of the striking mass affects considerably the development of the buckling shape causing different patterns of axial strain distributions at the initiation of buckling. The comparisons which are made between the model predictions and some previously published experimental data show that the buckling process is governed by the impact velocity as well as by the external loading history provided by the experimental technique.