Progress in multilayer devices as X-ray optical elements

A new kind of mirror based on multilayering techniques gives the possibility of preparing artificial Bragg reflectors over all the X-UV range. The possibility to choose most of the parameters governing the reflectivity opens the possibility to get a very good efficiency, even under normal incidence. Main parameters, evaporating techniques and tests are described. Some example of recent results are compared to the theoretical predictions.     

Boundary-integral equation analysis of twisted internally cracked axisymmetric bimaterial elastic solids

 Green's function is obtained for the infinite bimaterial elastic solid, containing an internal circular interface crack, loaded by a unit tangential co-axial circular source. An axisymmetric direct boundary integral equation (BIE) is used for the analysis of a finite bimaterial axisymmetric body containing an internal circular interface crack and a finite homogeneous cracked cylinder, both under torsional loading. Using the proposed technique, no discretization of the crack surface is necessary. Numerical results for both examples as obtained by the proposed method are presented and discussed. Received: 29 October 2001 / Accepted: 29 May 2002     

A study on time schemes for DRBEM analysis of elastic impact wave

 The precise integration and differential quadrature methods are two new unconditionally stable numerical schemes to approximate time derivative with more than the second order accuracy. Recent studies showed that compared with the Houbolt and Newmark methods, they produced more accurate solutions with large time step for the problems where response is primarily dominated by low and intermediate frequency modes. This paper aims to investigate these time schemes in the context of the dual reciprocity BEM (DRBEM) formulation of various shock-excited scalar elastic wave problems, where high modes have important affect on traction response. The Houbolt method was widely recommended in many literatures for such DRBEM dynamic formulations. However, this study found that the damped Newmark algorithm was the most efficient and accurate for impact traction analysis in conjunction with the DRBEM. The precise integration and differential quadrature methods are shown inapplicable for such shock-excited problems due to the absence of numerical damping. On the other hand, we also found that to achieve the same order of accuracy, the differential quadrature method required much less computing effort than the precise integration method due to the use of the Bartels–Stewart algorithm solving the resulting Lyapunov matrix analogization equation. Received 6 November 2000     

The boundary contour method for two-dimensional Stokes flow and incompressible elastic materials

 A variant of the boundary element method, called the boundary contour method (BCM), offers a further reduction in dimensionality. Consequently, boundary contour analysis of two-dimensional (2-D) problems does not require any numerical integration at all. While the method has enjoyed many successful applications in linear elasticity, the above advantage has not been exploited for Stokes flow problems and incompressible media. In order to extend the BCM to these materials, this paper presents a development of the method based on the equations of Stokes flow and its 2-D kernel tensors. Potential functions are derived for quadratic boundary elements. Numerical solutions for some well-known examples are compared with the analytical ones to validate the development. Received 28 August 2001 / Accepted 15 January 2002     

表面粗糙度的自动确定

根据零件精度，在CAD系统中能够快速、准确地自动确定其表面粗糙度，从其间接关系上分析并推导出了一套实用的换算公式，并使用在某CAD中。     

贵溪冶炼厂闪速炉炉体第二次改造

介绍贵冶闪速炉炉体两次改造 ,炉体冷却元件的设置及设计特点 ,阐明了设置冷却元件必要性及使用的实际效果。     

基于有限元分析的金刚石钻头强度验算公式

在对81／2B125金刚石钻头进行有限元计算分析后，找出最大应力点在金刚石钻头冠部切削告处。通过改变各相关尺寸和结构型式，用有限元法模拟试验过程，在给定结构参数和工艺参数情况下获得多组数据。根据专业知识，参考有限元计算获取的各组数据变化特征，选出拟合较好的公式类型，再采用回归分析方法确定待定系数，最后得出工程上实用的金刚石钻头强度验算公式。用这个公式对81／2B461W和121／4B331金刚石钻头进行了强度验算，经改进设计后钻头在现场使用取得了良好的效果。     

HYSIM软件模拟天然气加工工艺流程的研究(Ⅰ)——系统中无循环物流

本文结合大庆油田天然气矿场加工实际生产装置,讨论了应用HYSIM烃类工艺模拟软件对含有不确定组分的体系进行流程模拟计算的特点、塔设备严格模拟计算过程中输入规定的选择、以及多股流换热器和吸附脱水工艺的模拟计算方法。     

A review of error estimation and adaptivity in the boundary element method

When using the boundary element method, the accuracy of the numerical solution depends critically on the discretization of the boundary into elements (panels). The distribution of the panels is one of the most important decisions taken when analyzing a problem, but still the vast majority of users employ empirical guidelines to distribute the panels. This paper reviews the various adaptive schemes that have been proposed for boundary elements. Numerical results are obtained for infinite fluid flow problems and free surface problems and are used to assess the reliability and effectiveness of each method.