A STUDY OF RATE-DEPENDENCE AT ELEVATED TEMPERATURE FOR AN Al-Cu-Mg ALLOY

The hot deformation of an Al-Cu-Mg alloy was studied in the two temperature ranges (room temperature-300℃ and 400℃-480℃). The rate-independent flow curves are typical of elasto-plastic response with significant work hardening followed by strain softening below 300℃. Similar dislocation structures with high density tangled into grain interiors were observed by TEM, which suggests that the process of obstacles arresting mobile dislocations results in this macroscopically rate-independence. At 400-480℃, all rate dependent flow behaviors characterized by a continuous softening after an initial work hardening at a small plastic strain show large tensile elongations. Long dislocation segments around the second phases infer their good mobility to climb across obstacles. Grain boundary morphology observed by TEM suggests that the capacity of the grain boundaries to absorb the dislocations sensitively accounts for the rate-dependent mechanical properties.     

辊底式热处理炉的改造

原江西新钢钢管有限责任公司的2座辊底式热处理炉,由于是采用人工手动调节煤气流量来控制温度,由此导致钢管热处理质量不稳定,加之冷料入炉,加热时间长、出炉烟气温度高,需进行改造。通过对炉型结构、燃烧系统及炉温控制系统3个方面的改造,达到了提高炉子产量、产品质量及节能降耗的效果。     

铸态AZ80镁合金高温热变形行为研究

在Gleeble-1500热模拟机上对铸态AZ80镁合金在应变速率为0.005s-1~5s-1、变形温度为200℃~400℃条件下的高温热压缩变形行为进行了研究。结果表明,材料真应力-真应变曲线呈现动态再结晶特征。在温度T≥250℃,试样流变应力行为对应变速率敏感;在低温下T=200℃,应变速率对流变应力影响不大。高温下试样流变应力符合幂指数函数关系,应力指数n为6,热变形激活能Q为220kJ/mol。在高应变速率条件下,试样在变形中的温升是应变量的函数。实验中,Zener-Hollomon参数值大的试样温升明显,而Zener-Hollomon值小的试样变形温度基本保持不变。     

提高钻杆接头冲击功的工艺方法

针对石油钻井关键产品高强度钻杆接头的使用要求,在保证强度指标要求非常高的前提下,研究摸索增加高温正火后再调质的工艺方法,以改善接头材料原始微观带状组织和纤维结构,细化晶粒,提高钻杆接头的冲击功,使该产品力学性能达到API标准的要求。     

高温镁合金的成分、组织设计与制备加工技术进展

介绍了提高镁合金高温性能的主要途径及目前研究较多的Mg-Al系、Mg-Zn系和Mg-RE系合金,同时分析了正在开始研究的含Y、Sc、Gd等稀土的新型耐热镁合金;同时分析了耐热合金中的耐热相,耐热合金的加工制备工艺进展。     

Evaluation of high Ni-Cr-Mo alloys for the construction of sulfur dioxide scrubber plants

Corrosion in wet lime/limestone systems used for flue gas desulfurization in thermal power plants is of great concern. The frequent variations in acidity and in chloride and fluoride ion concentrations experienced by such systems pose a serious threat to the materials of construction. Currently used materials mostly type 316L stainless steel often fail to meet their life expectancy. The present study evaluates the performance of advanced Ni- Cr- Mo alloys 59 and C- 276 in a simulated sulfur dioxide scrubber environment. Accelerated tests showed that high Ni- Cr- Mo alloys have little tendency to leach metal ions such as chromium, nickel, and molybdenum at different impressed potentials. Scanning electron microscopy was used to examine the morphology of pitting attack.     

NiTi形状记忆合金的相变温度滞后

用透射电镜、正电子湮没和电阻测量,研究了NiTi形状记忆合金的组织结构与相变滞后的关系结果表明,经不同制度时效处理的组织,其相变温度滞后大小的顺序是:片状马氏体>R相>束状马氏体。Ti_(11)Ni_(14)相质点周围的共格应力场对这些相的可逆转变起障碍作用。正电子湮没Doppler展宽能谱S参数值与试样的温度滞后值之间存在线性关系,从而确认Ti_(11)Ni_(14)相析出的错配位错密度及由此而建立的晶体中弹性应力场分布是决定NiTi合金相变温度滞后的主要因素。     

气体硬化水溶性砂芯的性能研究

以电熔刚玉为骨料、氢氧化钡为粘结剂、铝粉为添加剂的型芯混合料在吹入CO_2气体后即可实现硬化。本文研究了这种型芯的硬化工艺和常温特性,并采用X射线衍射分析、失重—示差热分析等方法,结合粘结膜的扫描电镜照片,对型芯的受热物理化学变化、高温强度、水溶性等行为进行了实验研究。     

采用中频炉冶炼LCC低温钢的实践与应用

介绍了中频炉炼LCC钢时 ,通过选择合适的炉衬和包衬材料 ,严谨的操作工艺 ,降低钢水中的气体和夹杂 ,从而使LCC钢低温性能合格率大大提高     

径向磁轴承柱槽比优化分析

本文建立了以径向磁轴承最大载承力Fmax为目标，在临界温升τ等多约束条件下，对定子柱槽比k的优化模型，设计变量选取轴承静态气隙s0和定子柱槽比k，采用模糊优化算法，计算结果表明，在其它参数不变的条件下，轴承静态气隙s0和定子柱槽比k在一定的取值范围内，对最大承载力Fmax有规律性影响，达当减小轴承静态气隙s0和增大定子柱槽比k都能显著提高轴承最大承载能力Fmax，结合试验结果对灵敏度进行了分析，并给出了相应结合。