Effect of friction stir processing and hybrid reinforcements on copper

In this research, a copper based surface composite was fabricated through dispersing hybrid composite particles onto its surface through friction stir processing (FSP) technique. Optical micrographs and scanning electron microscopy images indicates finer refinement of grains and particles dispersion into matrix along with its bonding and particle separation. As per the outcomes of microhardness analysis, hardness of the developed surface composite shows increment with increase in dispersion of volume fraction of hybrid particles. Strength of the developed copper surface composite exhibited a positive trend with introduction of hybrid reinforcement particle onto the surface of the composite but yet again ductility reduced. Wear resistance of the composite increased with reinforcement addition and the same was supported through worn out surface morphology. Fluctuations in friction coefficient value reduced with increase in particles, as for the presence in BN particles while the average frictional coefficient value was observed increasing. A reduction in corrosion rate was observed with increase in reinforcement particle dispersion onto copper matrix through FSP.     

On the effect of tool offset in hybrid-FSW of copper-aluminium alloy

Tool offset is one the most significant parameters in joining of dissimilar materials by friction stir welding (FSW) process. An investigation is carried out on the effect of tool offset toward thermal history, material flow pattern, mechanical properties, welding force, and weld joint morphology. It was found that offsetting toward aluminum side along with a plasma-assisted heat source is an efficient approach to address one of the most important apprehensions in aluminum-copper solid-state welding process. The offset influences the amount of intermetallic at the joint interface and in-effect impacts on final strength and material flow behavior. The optimum and continuous layer of intermetallic produces the maximum weld joint strength. The specimen welded with optimum tool offset shows the highest strength using 55 A plasma current in hybrid friction stir welding process.     

Light‐Activated,Multi‐Semiconductor Hybrid Microswimmers

Using a dynamic fabrication process, hybrid, photoactivated microswimmers made from two different semiconductors, titanium dioxide (TiO₂) and cuprous oxide (Cu₂O) are developed, where each material occupies a distinct portion of the multiconstituent particles. Structured light‐activated microswimmers made from only TiO₂ or Cu₂O are observed to be driven in hydrogen peroxide and water most vigorously under UV or blue light, respectively, whereas hybrid structures made from both of these materials exhibit wavelength‐dependent modes of motion due to the disparate responses of each photocatalyst. It is also found that the hybrid particles are activated in water alone, a behavior which is not observed in those made from a single semiconductor, and thus, the system may open up a new class of fuel‐free photoactive colloids that take advantage of semiconductor heterojunctions. The TiO₂/Cu₂O hybrid microswimmer presented here is but an example of a broader method for inducing different modes of motion in a single light‐activated particle, which is not limited to the specific geometries and materials presented in this study.     

Surface integrity of Inconel 718 by hybrid selective laser melting and milling

ABSTRACT

While selective laser melting (SLM) offers design freedom of metal parts with much less material consumption, there exist several limitations, including high surface roughness, low-dimensional accuracy, and high tensile residual stresses. To make functional parts with high form accuracy and superior surface integrity, an as-SLM part needs finishing to remove the deposited surface material. The integration of machining and SLM creates a hybrid manufacturing route to overcome the inherited limitations of SLM. However, little study has been done to characterise surface integrity of an as-SLM part followed by machining (e.g. hybrid SLM-milling). In this paper, surface, integrity including surface roughness, microstructure, and microhardness, have been characterised for IN718 samples processed by the hybrid process. It has been found that microhardness varies with the scan direction and the use of coolant in the subsequent milling, and surface integrity can be significantly improved by the hybrid SLM-milling route.     

Preparation of Porous Silver Nanowires-Melamine Formaldehyde Hybrid Composite Materials and Their Electromagnetic Shielding and Flame-Retardant Properties

Along with the booming development of communication technology and electronic equipment, higher requirements of flame-retardant and EMI shielding performances for electromagnetic interference (EMI) shielding materials are put forward. Herein, the ultralight and porous silver nanowires (AgNWs)-melamine formaldehyde (MF) hybrid composite with unique micro-/nanostructure is developed by a facile dip-coating method, which uses the AgNWs as 1D conductive coating and MF foam (MF foam) as 3D skeleton template. Benefiting from the unique porous micro-/nanostructure, the resultant hybrid composite displays low density, excellent EMI shielding performances, and superior flame-retardant property. The EMI shielding effectiveness (SE) and specific EMI SE (SSEt) of the hybrid composite in X-band (8.2–12.4 GHz) can be up to 77 dB and 26971.4 dB cm⁻² g⁻¹, respectively. At the same time, the hybrid composite also passes the vertical burning test and shows an increased LOI value of 40.6%. The combination of flame-retardant and EMI shielding performances for EMI shielding materials makes the AgNWs-MF hybrid composite great application potential in civil and military fields. This work provides a new guide for the design of multifunctional high-performance EMI shielding materials.     

An efficient approach for statistical moments estimation of structural response based on a novel adaptive hybrid dimension-reduction method

Statistical moments estimation is one of the main topics for the analysis of a stochastic system, but the balance among the accuracy, efficiency, and versatility for different methods of statistical moments estimation still remains a challenge. In this paper, a novel point estimate method (PEM) based on a new adaptive hybrid dimension-reduction method (AH-DRM) is proposed. Firstly, the adaptive cut-high-dimensional model representation (cut-HDMR) is briefly reviewed, and a novel AH-DRM is developed, where the high-order component functions of the adaptive cut-HDMR are further approximated by multiplicative forms of the low-order component functions. Secondly, a new point estimation method (PEM) based on the AH-DRM is proposed for statistical moments estimation. Finally, several examples are investigated to demonstrate the performance of the proposed PEM. The results show the proposed PEM has fairly high accuracy and good versatility for statistical moments estimation.     

混合动力汽车启停巡航系统建模与仿真

以混合动力汽车为研究对象,建立了启停工况下车辆纵向动力学仿真模型,设计了车辆巡航上位控制器与下位控制器.提出一种基于模糊逻辑的最优控制算法应用于上位控制器设计,该算法结合模糊控制的优点,利用模糊逻辑将熟练驾驶员的经验引入到控制器设计中,修正了常规最优控制算法在某些特定情况下不符合实际驾驶状况的控制输出.针对启-停车辆纵...     

蓄热式加热炉的空燃比控制

针对蓄热式加热炉具有多变量、时变、非线性、耦合、大惯性和纯滞后等特点,当前时于蓄热式加热炉的空燃比控制主要还是人工操作完成的问题,通过对蓄热式加热炉空燃比变化这一复杂的工业过程的分析,提出了一种蓄热式加热炉空燃比控制方法,设计了一个基于智能的空燃比控制系统.用无辨识自适应方法预测热值,用模糊神经网络预测烟气残氧量,解决...     

A spatial orthogonal allocation and heterogeneous cultural hybrid algorithm for multirobot exploration mission planning

A spatial orthogonal allocation method is devised for multirobot tasks allocation.A 3D space model is adopted to describe exploration mission;meanwhile spatial orthogonal tentative technology is utilized to update the attractor position for load balance.Heterogeneous interactive cultural hybrid architecture is proposed to solve a robot route planning problem;it utilizes good-point-set to initialize population spaces,redefine novel evolution model and particle evolution ability,and introduce near-neighbor lo...     

A spatial orthogonal allocation and heterogeneous cultural hybrid algorithm for multirobot

A spatial orthogonal allocation method is devised for multirobot tasks allocation.A 3D space model is adopted to describe exploration mission;meanwhile spatial orthogonal tentative technology is utilized to update the attractor position for load balance.Heterogeneous interactive cultural hybrid architecture is proposed to solve a robot route planning problem;it utilizes good-point-set to initialize population spaces,redefine novel evolution model and particle evolution ability,and introduce near-neighbor lo...