Surface characterization of PET nonwoven fabric treated by He/O2 atmospheric pressure plasma

The surface of polyethyleneterephthalate (PET) nonwoven fabric was modified by He/O₂ atmospheric pressure plasma treatment, varying plasma exposure time. The plasma treated PET surfaces have been analyzed to investigate the chemical nature and morphology of surface by X‐ray photoelectron spectroscopy (XPS) and atomic force microscopy (AFM), respectively. The change of wettability was measured depending on plasma exposure time. XPS results indicated the presence of oxygen‐based functional groups on the PET nonwoven fabric surface after plasma treatment and oxygen content increased as exposure time increased. The mean roughness increased after 30 s exposure and further increase in exposure to 60 s led to decrease of the roughness and then again increase. The root mean square roughness followed the similar trend to mean roughness. The average difference in height, Rz, increased after plasma exposure for 30 s, while it slightly decreased after 60 s exposure. Despite of redeposition, the Rz of 90 s exposed sample increased more than two times compared with those of 30 and 60 s exposed. Wettability increased progressively up to 10 times after 90 s exposure compared with the untreated. It is attributed to the increases of hydrophilicity and surface roughness. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

大庆油田葡深1井射孔及测试

葡深1井完钻井深5500m，井温高达200℃以上，射孔、测试施工难度大。经过针对性的射孔测试设计和模拟试验，成功地完成了二层射孔及测试，射孔弹发射率100％，获取了合格的地层测试资料，为该地区下步深层勘探布署提供了科学依据。     

高速列车风量控制式通风系统的探讨

介绍了能够减轻乘坐高速列车时产生的耳朵不适感的风量控制式通风系统，该系统通过检测车内外的压力来控制进排气量，并且由模拟计算证实，该系统能够控制车内压力的波动，满足高速列车的舒适性需要。     

两种含水炸药动压下减敏作用的实验研究

用实验方法对两种含水炸药—水胶炸药和珍珠岩敏化的乳化炸药动压下的减敏作用进行了研究。为了更全面深入地研究这问题,提出了临界压死距离和临界距离两个概念。研究表明,含水炸药的减敏作用与药包间距和延期时差关系很大。水胶炸药的临界压死距离大于乳化炸药,而它们的临界距离相当,这表明两种炸药发生减敏的难易程度相近,但是乳化炸药的抗压死能力比水胶炸药大。采用5段延期电雷管引爆时两种含水炸药的减敏作用比采用2段延期电雷管引爆严重些。     

退火炉保护气氛的安全控制

钟罩室退火护采用微压氢气作为保护气体，炉内压力的监控是保证安全生产不可忽视的必要手段，该文针对该公司选用的国产钟罩式退火护作了简要介绍，对国产钟罩式退火炉压力监控系统作了分析，指出了存在的缺陷，提出了改进措施。     

Heavy arsenic doping of silicon grown by atmospheric pressure selective epitaxial chemical vapor deposition

Selective epitaxial Si with a high arsenic concentration of 2.2×10¹⁹ atoms/cm³ was deposited at a high growth rate of 3.3 nm/min under atmospheric pressure. It was confirmed that this method had excellent selectivity and produced films having good crystalline quality, abrupt dopant profiles at the interfaces, and smooth surfaces. The growth mechanism is discussed in terms of the relationship between the effects of arsenic surface segregation and etching by hydrogen chloride.     

土体中毛细水压力的研究

该文从毛细水产生负孔隙水压力概念入手 ,对较难确定的孔隙水压力系数以及较抽象的地下连续墙时效稳定分析等问题进行了定量计算 ,以期对工程实践有一定的指导作用     

WDB620高强钢应用于大型蜗壳的焊接制造工艺研究

2005年初,水电十四局承担了漫湾二期水电站和小湾水电站蜗壳的制造任务。蜗壳钢材选用国产600 MPa级别高强钢,为了全面综合地考核该级别钢种的材料强度和安全裕度,检验模拟大型蜗壳焊接制造工艺的可靠性。对国产的WDB620高强钢进行了可焊性和制造工艺性试验研究,并在国内首次设计、制造模拟压力容器并对其进行水压试验和爆破试验。研究成果通过中国水电集团公司鉴定,结论为该课题研究成果达到国内选进水平。     

Limited reinforced space in segmental retaining walls

Current design of geosynthetic reinforced segmental retaining walls considers an a priori limitless length for reinforcement installation. Such length is typically 0.5–0.7 times the height of the wall. However, often there are constraints on such space; e.g., bedrock formation located at a small distance behind the facing. The objective of this note is to introduce a procedure for assessing the required long-term strength of the reinforcement while considering its limited length. Predictions by a conventional slope stability analysis were first checked against a continuum-mechanics based numerical analysis. Upon obtaining good agreement, a design chart was developed. The chart enables the determination of the reduction in the lateral earth pressure coefficient due to the constrained space. The revised earth pressure coefficient can be used with current analytical methods to account for the limited space. The results appear to be valid for conventional walls retaining a limited volume of soil. Comparison with limited experimental results for unreinforced backfill shows reasonably good agreement.     

排气管偏置对PV型旋风分离器性能影响的研究

以Ф300mm、标准PV型旋风分离器为基准模型进行冷态对比实验，研究了排气管与筒体轴线偏心布置对PV型旋风分离器分离性能的影响。结果表明，排气管偏置是进一步提高PV型旋风分离器性能的有效措施之一。在适当的偏心矩和偏置方位下，不仅能降低压降，还可以显著提高分离效率。