具有厚大断面的大型球墨铸铁铸件的生产

首先通过电炉—LF精炼炉—VD精炼炉—包内球化的工艺路线获得了足够的优质铁液,然后通过选取合适的分型面、设置合理的浇注系统、设计专用的冷铁、安放足够大的保温冒口和上表面加大加工余量来去除夹渣等措施,成功生产了具有厚大断面的大型球墨铸铁铸件。     

摩擦诱发高铬铸铁相变的透射电镜研究

利用透射电子显微镜研究了高铬铸铁在摩擦过程中的显微组织变化。结果表明：奥氏体基体在摩擦应力的作用下发生相变。摩擦表面形成α‘Ｍ。次表层形成γ与α’Ｍ共存区；γ与．ε共存区；γ位错丛聚区。     

高炉炉缸内铁水环流与内衬侵蚀

从分析中心焦柱在炉缸内的受力出发，计算了１０００￣５５８０ｍ＾３高炉大喷煤前后中心焦柱在炉缸铁水内的沉入深度，分析了炉缸内铁水环流的产生与炉缸内衬侵的关系，分析表明大喷煤有得利抑制铁水环流对缸内补的冲刷，提出了降低铁水环流对炉缸内衬侵蚀的途径。     

铁矿石境外投资风险评估的模糊神经网络模型

论文将模糊理论与神经网络结合,对铁矿石境外投资所涉及的风险因素分别从资产影响、威胁频度两方面进行分析,建立了铁矿石境外投资的风险层次化结构,并构造了各因素所对应评判集的隶属度矩阵;综合运用模糊推理算法与神经网络仿真技术,对铁矿石境外投资的风险进行评估,进而判定铁矿石境外投资风险等级。最后,通过计算铁矿石境外投资的市场风险说明了算法的应用,并将结果与模糊综合评估得到的风险值进行比较,检测了模型的有效性。     

以1,3-二(4-邻羟基苯亚胺次甲基)苯氧基丙烷为载体的铁离子(Ⅲ)电极的研究

以1,3-二(4-邻羟基苯亚胺次甲基)苯氧基丙烷为中性载体制备了PVC膜Fe3+离子选择性电极。该电极对Fe3+呈现出良好的选择性和近Nernst电位响应性能。电极斜率为21mV/dec,线性范围为3.0×10-5～1.0×10-1mol/L,检出限为1.0×10-5mol/L。采用交流阻抗技术研究了电极的响应机理,并将电极作为指示电极初步用于EDTA的电位滴定。     

Effect of Fe on the high temperature oxidation of TiAl alloys

An alloy of 51.23Ti−48.73Al−0.4Fe (at.%) was oxidized at 800, 900 and 1000°C in air to determine the effect of Fe on oxidation. The scales formed consisted of an outer TiO₂ layer, an intermediate Al₂O₃ layer, and an inner mixed (TiO₂ Al₂O₃) layer, typical of conventional TiAl alloys. A small amount of dissolved Fe ions was weakly segregated in the outer TiO₂ layer and also in the inner (TiO₂−Al₂O₃) mixed layer. Ti₂AIN and TiN were detected in the scale in some instances. A thin, oxygen-affected Ti₃Al sublayer formed at the oxide-substrate interface. The overall oxidation kinetics and the scale morphology were not affected by Fe-addition.     

用微量元素涂料改善球铁件热节组织的试验研究

对RE、Tc、Bi、Sb等微量元素以涂料形式对球铁件厚大热节部位进行微合金化,以改善其组织的可能性进行了试验研究,结果表明:多元微量元素涂料可有效地消除碎块状石墨,提高球化率,改善球铁组织,涂料层厚度影响微合金化程度而应严格控制,该工艺具有简便。无炉料污染、可代替冷铁以确保复杂铸件组织均一等优点。     

多系列铸铁光电发射光谱标准样品的研制

采用中频炉熔炼，用自行设计的多孔隔离式金属型和独特的补缩和浇注系统及临界激冷工艺进行浇铸，成功地研制出了带有高低标的铸铁系列多元素光电光谱分析标样。对标样的白口化程度、均匀性、呈线性分布及分析精度等进行了检测并得出可行性结论。     

全封闭大功率永磁牵引电机的温度场数值计算

为研究全封闭大功率永磁牵引电机额定工况下的稳态温度场,以一台额定功率为815 kW的永磁同步牵引电机为研究对象,依据成型绕组槽部导热模型,建立了整机三维温度场共轭传热计算模型。考虑旋转磁化、冲压过程和磁密高阶谐波对定子铁耗的影响,以及水套-定子铁心间接触热阻抗对电机温升的影响,采用Fluent软件对电机额定工况下的稳态流场与温度场求解,使用电阻法和埋置检温计法（ETD）测得电机在额定工况下绕组的平均温升、铁心测点和绕组端部测点局部温升,绝对误差分别为-3.7 K、-0.3 K和7.6 K。进一步分析了电机水路和内风路流场分布特性、水套-定子铁心间接触间隙对绕组平均温升的影响以及槽内绕组附近的温升分布情况,最后提出了该类电机冷却系统设计优化方向。     

The Esterase PfeE,the Achilles’ Heel in the Battle for Iron between Pseudomonas aeruginosa and Escherichia coli

Bacteria access iron, a key nutrient, by producing siderophores or using siderophores produced by other microorganisms. The pathogen Pseudomonas aeruginosa produces two siderophores but is also able to pirate enterobactin (ENT), the siderophore produced by Escherichia coli. ENT-Fe complexes are imported across the outer membrane of P. aeruginosa by the two outer membrane transporters PfeA and PirA. Iron is released from ENT in the P. aeruginosa periplasm by hydrolysis of ENT by the esterase PfeE. We show here that pfeE gene deletion renders P. aeruginosa unable to grow in the presence of ENT because it is unable to access iron via this siderophore. Two-species co-cultures under iron-restricted conditions show that P. aeruginosa strongly represses the growth of E. coli as long it is able to produce its own siderophores. Both strains are present in similar proportions in the culture as long as the siderophore-deficient P. aeruginosa strain is able to use ENT produced by E. coli to access iron. If pfeE is deleted, E. coli has the upper hand in the culture and P. aeruginosa growth is repressed. Overall, these data show that PfeE is the Achilles’ heel of P. aeruginosa in communities with bacteria producing ENT.