器外复杂换热的搅拌容器中液体不稳定传热计算

论述了器外复杂换热的搅拌容器中液体不稳定传热计算方法,对几种常见的这类情况进行了算式推导,并举例说明     

Effect of deteriorated microstructures on stress corrosion cracking of X70 pipeline steel in acidic soil environment

In order to investigate stress corrosion cracking (SCC) of X70 pipeline steel and its weld joint area in acidic soil environ-ment in China, two simulating methods were used: one was to obtain bad microstructures in heat affected zone by annealing at 1300°C for 10 min and then, quenching in water; the other was to get different simulating solutions of acidic soil in Yingtan in south-east China. The SCC susceptibilities of X70 pipeline steel before and after quenching in the simulating solutions were analyzed...     

浅谈铝合金板带退火炉节能降耗

主要从生产组织、工艺优化、余热利用等六个方面介绍了铝及铝合金退火炉节能降耗的方法和措施.     

ZL205A高强度铝铜合金的铸造及热处理

探讨了ＺＬＮ２０５Ａ高强度铝铜合金的铸造性能和热处理工艺方法，阐述了ＺＬ２０５Ａ铝铜合金在Ｔ５热处理时，如何才能达到机械性能的工艺方法。     

Two-Parameter Thermal Lattice BGK Model with a Controllable Prandtl Number

In this paper, two time relaxation parameters are introduce to a thermal lattice BGK, model to make its Prandtl number controllable. The dependency of the Prandtl number on the two parameters is derived. Numerical measurement of the transport coefficients is used to demonstrate the validity of the method. Furthermore, two examples of convective heat transfer are calculated, with one to show the effectiveness, and the other to show the breakdown of the two-parameter formulation under different conditions.     

地埋管地源热泵水系统的若干问题研究

结合调研测试的实际工程,根据实际工程中地埋管地源热泵系统中水系统的形式及特点,归纳了设计、运行管理、设备故障等几个方面的水系统常见的问题。探讨了地埋管地源热泵水系统的设计问题,指出某些工程水系统存在的问题及解决思路;分析水系统故障的原因及表现,通过对水系统运行状态的观察与测试,从机组COP及系统能效比的角度分析水系统故障的影响：对于运行管理方面,提出相应的水系统形式的运行建议,为优化地埋管地源热泵的设计及运行管理提供了相应参考。     

浇注型耐热聚氨酯树脂材料的合成及性能

以二异氰酸酯(4,4’-二苯甲烷二异氰酸酯MDI;4,4’-二环己基甲烷二异氰酸酯Hl2MDI),聚醚多元醇(PPG),小分子交联扩链剂,催化剂及助剂合成了一系列耐热聚氨酯树脂材料。用FT-IR表征了结构,用X射线衍射分析了微观结构,用DSC,TGA对其热稳定性进行了分析测试,对力学性能也进行了测试。结果表明,合成的聚氨酯材料具有高耐热性和卓越的力学性能。     

Selecting Meters for Water-Based Heat Supply Systems

Basic criteria are considered for selecting meters for open and closed water-based heat supply systems. Results are given from an independent questionnaire concerned with the ranking of selection criteria and preferences for types of meter present on the Russian market, as well as the technical characteristics and services provided by meters made by the Teplocom company in St. Petersburg.     

Distribution of heavy metals during pyrolysis of waste printed circuit boards

The volatilization behavior of Cu, Pb, Sn, Sb, Ni, Zn, Mn, Co, Cr, Cd during pyrolysis of waste printed circuit boards was investigated in a bench-scale fixed-bed pyrolysis system. It was found that volatility of heavy metals increases with operating temperature elevating, and bromine and vacuum have an obvious promoting effect on volatility of most of heavy metals. Over 99% weight of Cu and Ni are still remained in solid residue after pyrolysis, about 20% weight of Sb, Zn and Cd are transfered into liquid and gas during a pyrolysis process at 600 ℃, volatilization fractions of Pb, Sn, Mn, Co, Cr are less than 10% at the same conditions. The contents of heavy metals in liquid and gas products depend on not only volatility of metals, but also their initial contents in printed circuit boards, pyrolysis liquid and gas are primarily contaminated by Cu, Pb, Sn, Sb and Zn, their contents in liquid vary from 10^2 to 10^3 pg/mL, Mn, Co, Cr, Cd were detected only at very low level, less than 10 μg/mL.