砾岩储层精细描述中标准测井资料的应用

克拉玛依油田七区的标准测井资料是指使用标准电极系视电阻率测井、自然电位测井和井径测井,以相同的1:500深度比例尺及相同的横向比例进行测井作业所取得的资料.这种资料本来并不具备定量解释储层孔隙度和含油饱和度的能力,但这种资料占该区测井资料总量的比率高达34%.利用标准电极系视电阻率资料和岩心分析资料建立了视电阻率-岩性图版,利用自然电位减小系数α和岩心孔隙度分析资料φ建立了α-φ图版,根据综合测井资料求出标准测井视电阻率校正系数,进而确定了饱和度计算方程的参数.与相应的综合测井资料计算结果相对比,用该方法得到的孔隙度平均绝对误差及相对误差分别为1.85%和11.88%;含油饱和度平均绝对误差及相对误差分别为9.08%和24.75%.将该方法有选择地应用到该区砾岩储层精细描述研究中,弥补了缺乏综合测井资料无法进行测井储层评价及参数研究的缺陷.     

论建立动态勘探目标评价体系的迫切必要性

从国际上通行的油气勘探评价工作重点,中国石油所面临的"已逐步进入一个不断在老区范围内开展精细勘探、在老区范围内开展新区块、新层系勘探以获得主要的储量增长"的新的勘探形势,现有地质研究中各专题研究与具体勘探目标评价脱节等多个方面,论述了在中国石油内部建立一套动态勘探目标评价体系的迫切必要性;并在此基础上阐述了一个完整的动态勘探目标评价体系应包括的主要内容;最后对该体系的建设进行了可行性分析。     

图书在版编目研究

简述了英、美等国图书在版编目的发展和中国实施在版编目的意义、作用及特点,对中国实施图书在版编目提出了设想和建议。     

Using an integrated process of data and modeling in HRA

The paper describes an approach taken to estimate the probabilities of failure associated with various railroad tasks to prevent accidents (principally collisions and derailments). These probabilities were estimated using an expert elicitation process that used partially relevant data available from a variety of databases and that were filtered and scaled to make them more directly relevant to the analyses being performed. Extensive qualitative studies were performed prior to the elicitation process to identify relevant contexts under which the tasks can be performed.     

Measurement and Identification of the Parameters of SPICE-Models of a Bipolar Transistor

A method of measuring and identifying the static parameters of a bipolar transistor is considered. The characteristic of the transistor, from which the parameters of the model are determined, is chosen depending on what group the calculated parameters belong to. The characteristics are measured in such a way that the equations of the model describing them can be reduced to the simplest form.     

连续波雷达测距中的解模糊技术

研究连续波雷达测距中的距离模糊问题，分析几种常用解模糊方法的性能，并讨论参差比的选取对测距范围的影响。     

Moving Least-Squares Differential Quadrature Method for Free Vibration of Antisymmetric Laminates

In this paper, the moving least-squares differential quadrature (MLSDQ) method is employed for free vibration of thick antisymmetric laminates based on the first-order shear deformation theory. The generalized displacements of the laminates are independently approximated with the centered moving least-squares (MLS) technique within each domain of influence. The MLS nodal shape functions and their partial derivatives are computed quickly through back-substitutions after only one LU decomposition. Subsequently, the weighting coefficients in the MLSDQ discretization are determined with the nodal partial derivatives of the MLS shape functions. The MLSDQ method combines the merits of both the differential quadrature and meshless methods which can be conveniently applied to complex domains and irregular discretizations without loss of implementation efficiency and numerical accuracy. The natural frequencies of the laminates with various edge conditions, ply angles, and shapes are calculated and compared with the existing solutions to study the numerical accuracy and stability of the MLSDQ method. Effects of support size, order of completeness of basis functions, and node irregularity on the numerical accuracy are investigated in detail.     

The Two-Dimensional Clifford-Fourier Transform

Recently several generalizations to higher dimension of the Fourier transform using Clifford algebra have been introduced, including the Clifford-Fourier transform by the authors, defined as an operator exponential with a Clifford algebra-valued kernel. In this paper an overview is given of all these generalizations and an in depth study of the two-dimensional Clifford-Fourier transform of the authors is presented. In this special two-dimensional case a closed form for the integral kernel may be obtained, leading to further properties, both in the L ₁ and in the L ₂ context. Furthermore, based on this Clifford-Fourier transform Clifford-Gabor filters are introduced. AMS subject classification numbers: 42B10, 30G35 Fred Brackx received a diploma degree in mathematics from Ghent University, Belgium, in 1970 and a Ph.D. degree in mathematics from the same university in 1973. Since 1984 he is professor for mathematical analysis at Ghent University and currently he is leading the Clifford Research Group. His main interests are function theory and functional analysis for functions with values in quaternion and Clifford algebras. The research covers Clifford distributions, generalized Fourier, Radon and Hilbert transforms, orthogonal polynomials and multi-dimensional wavelets. Nele De Schepper received a diploma degree in mathematics from Ghent University, Belgium, in 2001. Since then she holds an assistantship at the Department of Mathematical Analysis of Ghent University and is a member of the Clifford Research Group. Her main interests are function theory and functional analysis for functions with values in Clifford algebras. The research covers generalized Fourier transforms, orthogonal polynomials and multi-dimensional wavelets. Frank Sommen received a diploma degree in mathematics from Ghent University, Belgium, in 1978, a Ph.D. degree in mathematics from the same university in 1980, and a habilitation degree in mathematical analysis in 1984. From 1978 until 1999 he was at the National Fund for Scientific Research (Flanders). Since 2000 he holds a Research professorship at Ghent University. His main interests are function theory and functional analysis for functions with values in quaternion and Clifford algebras. The research covers Clifford distributions, generalized Fourier, Radon and Hilbert transforms, orthogonal polynomials and multi-dimensional wavelets, algebraic analysis, hyperfunctions and radial algebra.     

电力系统谐波检测的现状与发展

准确、实时地对电力系统谐波进行检测有着重要的意义。本文根据电力系统谐波测量的基本方法，对近年来电力系统谐波检测的新方法进行了分析和评述。最后对电力系统的谐波测量进行了总结并提出了看法。