塑料注塑加工中结晶与取向的探讨

介绍结晶性塑料在注塑过程中的塑化特点、取向与结晶的关系及其对制品性能的影响，注塑参数对结晶性塑料塑化、取向、结晶的影响。讨论了在实际工作中如何利用这些特性进行注塑机塑化系统、模具的设计并确定注塑工艺，从而得到品质优良的制品。     

Glass Furnace Boost Technology-Series/Parallel Switch

In the paper, the characters and fields were introduced for utilizing the Series/Parallel Switch (SPS). The circuit principle of the SPS technology was analyzed in detailed, explained and illuminated. We understood clearly the difference between SPS and single-phase transformator by the figure and table. Finally, it summarized that the main characters of SPS.     

Relationships Between the Crystal Structures and the Multiple Melting Behaviors of Poly(ethylene 2,6‐naphthalate)

Summary: Poly(ethylene 2,6‐naphthalate) (PEN) can crystallize either from the glassy state or from the melt state. When crystallized from the glassy state, the sample was quenched from the melt in liquid nitrogen and then annealed at certain crystallization temperatures. When crystallized from the melt state, the sample was cooled to a preset temperature from the melt and then annealed for a certain time. The crystal modifications, morphologies and melting behaviors of PEN were investigated by means of wide‐angle X‐ray diffraction (WAXD), polarized optical microscopy (POM), small‐angle light scattering (SALS) and differential scanning calorimetry (DSC). The results show that an α crystal modification of PEN was obtained when PEN crystallized from the glassy state, whilst a β crystal modification was obtained when PEN crystallized from the melt state at a higher temperature. An hedritic morphology of PEN crystal was obtained with only one melting peak observed in DSC curves when PEN was crystallized at a higher temperature from either the glassy state or the melt state. The α crystal modification could also be obtained when PEN was crystallized at a lower temperature from the melt. Spherulitic or banded spherulitic morphologies of PEN crystals, exhibiting multiple melting peaks in DSC curves, were observed when PEN was crystallized at a lower temperature. The multiple melting behaviors of PEN crystals may be associated with spherulitic structures composed of lamellae of varying thickness.

WAXD patterns of PEN isothermally crystallized from different states.     

Light-sensitive elastomers modified by 4-(N-dimethylmaleimido)-benzenesulphenyl chloride

New light-sensitive polymers were prepared by modification of four different elastomers with 4-(N-dimethylmaleimido)-benzenesulphenyl chloride (DMI-BSCI). Polydienes modified by DMI-BSCI form block copolymers. These polymers show a strong increase of the glass transition temperature T_g whereby the T_g increase of modified poly(octenamer) is much smaller. Higher modified polydienes have two T_g. Modified poly(octenamers) show a melting temperature dependence T_m on the content of trans double bonds which is characteristic of statistical copolymers. The ratio of rate constants with which trans- and cis-structures in poly(octenamer) are occupied by DMI-BSCI, is

$\text{k}{}_{\mathrm{trans}}\text{k}{}_{\mathrm{cis}}\text{= 0.34}$

     

铝锆炭滑板在浇铸钙处理钢时的化学侵蚀

利用扫描电镜对抗钙处理钢液侵蚀试验后的铝锆炭残样进行了显微结构观察 ,并分析了铝锆炭滑板在钙处理钢液中的化学侵蚀机理。结果表明 :高温下 ,钙处理钢液中的Ca及CaO会与滑板中的Al2 O3 、SiO2 发生反应 ,生成低熔点的 12CaO·7SiO2 (1392℃ )和 2CaO·SiO2 ·Al2 O3 (15 39℃ )等物质 ,这些低熔物被钢水冲刷掉 ,使得滑板表层的Al2O3 和SiO2 含量迅速降低 ,从而导致了滑板的损毁。     

Heterogeneous reactions of polymers: 4. Melting behaviour of heterogeneously chlorinated and sulphonated polyethylenes

The melting behaviour of heterogeneously chlorinated and sulphonated high-density polyethylene was studied by differential scanning calorimetry. It was found that an increase in T_m takes place at high degrees of substitution in the amorphous phase. For sulphonated polyethylenes the increase in T_m was also dependent on the type of the counterion. The effect is interpreted as a decrease in configurational entropy upon fusion due to the restraints that the highly chlorinated and sulphonated amorphous regions impose on the adjacent crystallites.     

尿液喷浆造粒——复合肥生产的一种新工艺

介绍在团粒法工艺的基础上 ,将尿素熔融成尿液或用尿素车间二段蒸发器的尿液进行喷浆造粒生产复合肥的改造方案、改造内容、改造效果和投资情况。     

Thermal and flow properties of oils from salmon heads

Thermal and flow properties of unrefined oils from the heads of red or pink salmon were evaluated. Major thermal degradation of the salmon oils occurred between 200 and 450°C. Red and pink salmon oils were completely decomposed at 533 and 668°C, respectively. The phase transition of salmon oils occurred over a wide range of temperatures. The melting points of −69.6 to −0.36°C and −64.7 to 20.8°C were observed for red and pink salmon oils, respectively. The enthalpy was 40 j/g for red salmon oil and 39 j/g for pink salmon oil. Specific heat capacity ranges of 0.8 to 1.6 and 1.3 to 2.3 j/g/°C were observed for red and pink salmon oils, respectively. Both salmon oils exhibited Newtonian flow behavior. Red salmon oil required higher magnitudes of energy (kj·mol⁻¹) to flow than pink salmon oil. The viscosity of salmon oils was temperature-dependent and could be predicted by the Arrhenius equation.     

Ablation of ice-solids and wax-solids mixtures in turbulent axisymmetric water jets

The ablation rate of frozen mixtures of water or wax with finely divided solids subjected to a turbulent axisymmetric water jet was investigated both experimentally and theoretically. The range of the water jet Reynolds number was 8700–29300 and the jet temperature varied between 22 and 60°C. The solids used were very fine kaolinite clay, titanium oxide and aluminium powder. The type of solids and their concentration were found to affect the ablation rate of ice-solids and wax-solids mixtures. This is mainly due to changes in the physical properties of the melt layer of the water-solids or wax-solids mixtures which forms between the impinging jet and the frozen mixtures.     

滴丸动力黏度的实验研究

复方丹参滴丸是治疗冠心病等疾病的纯中药固体制剂.在滴丸滴制时,滴丸的动力黏度影响滴丸成品的外观质量,如圆整度、硬度、大小和干裂度等.本文研究复方丹参滴丸制剂的含水率和溶化温度对滴丸动力黏度的影响.通过实验测定和数据分析得出,滴丸制剂的溶化温度在75℃~85℃,滴丸制剂含水率为6%~10%的条件下,滴丸的动力黏度值基本恒定,滴丸的滴制效果最佳.实验结果已经用于制订新的生产工艺,指导实际药品的生产.