过渡金属对Au-Pd/TiO_2-Al_2O_3催化剂加氢脱硫性能的影响

研究了掺杂过渡金属Ru,Ni,Co对Au-Pd/TiO2-Al2O3催化剂催化噻吩加氢脱硫活性的影响,并采用X射线衍射、电感耦合等离子发射光谱、程序升温还原和程序升温脱附等方法对TiO2-Al2O3复合载体、Au-Pd/TiO2-Al2O3和Au-Pd-TM/TiO2-Al2O3(TM表示过渡金属)催化剂进行了表征。实验结果表明,掺杂过渡金属未改变Au-Pd/TiO2-Al2O3催化剂的结构;掺杂Ru或Ni增强了Au-Pd/TiO2-Al2O3催化剂的活性组分与TiO2-Al2O3复合载体的相互作用,降低了反应活化能,提高了催化剂活性组分的分散度和活性比表面积,改善了Au-Pd/TiO2-Al2O催化剂的吸附性能,从而提高了Au-Pd/TiO2-Al2O3催化剂催化噻吩加氢脱硫的活性;而掺杂Co的效果则与之相反。     

Ni|MH二次电池负极用贮氢合金的研究发展

本文详细综述了近年Ni MH二次电池负极用贮氢合金的研究发展概况。依次阐述了AB5、AB2与Ni Ni基、V Ti基固溶体合金以及Mg Ni合金的电化学性能。讨论了改善电化学性能的一些方法 ,同时给出目前一些研究成果     

云2-平1多台阶变方位水平井钻井液技术

云2-平1井是位于复杂断块油气田上的一口中曲率半径水平井,水平段长820.86 m,水平段多台阶、方位角变化幅度大(29.6°),井下摩阻大,钻井液的携砂、润滑及防卡能力是该井钻井成功的关键。该井选用有机正电胶-聚合物钻井液体系,用高分子量聚合物胶液进行维护,以提高体系的悬浮携岩及防塌能力,通过加入液体磺化沥青、原油及与之相配伍的固体乳化剂来提高润滑性,配合良好的四级固控设备及时清除有害固相,使钻井液性能稳定且易于调整,增强了泥饼的韧度和强度,完全达到了充分悬浮携带岩屑、润滑防卡、稳定井壁的要求。在钻进过程中仔细观察钻井液的动切力、动塑比、静切力初终值、固相含量、含油量、膨润土含量等性能参数的变化,“细化、超前、配套”是该井钻井液性能稳定、效果良好的主要维护处理经验。下套管、钻杆输送测井顺利,井下摩阻始终小于10 kN,全井安全无事故,仅用45d8 h钻完3200 m的进尺。     

Effect of variable friction coefficient on sheet metal drawing

A variable friction model that relates the parameters of sheet metal drawing to the local lubrication conditions taking place during the deformation, has been integrated to a finite element program. Variable friction coefficients for the contacting surfaces are determined from the friction model, which uses the related parameters obtained at each time step of the finite element program as inputs. A number of numerical runs have been performed and the strains are compared with the experimental results for circular blanks. A good agreement is obtained between the numerical and experimental results for the variable friction model used.     

LLDPE及其催化剂技术进展

综述了线性密度聚乙烯（LLDPE）研究的最进展情况，特别对乙烯原位聚合工艺和后过渡金属镍、钯催化剂进行了详细的叙述，对我国LLDPE的生产提出了自己的看法。     

电子封装用金属基复合材料的制备

分析了电子封装用金属基复合材料的性能特点及其对制备工艺的要求，在此基础上论述了该种材料的各种制备工艺的特点及发展现状。     

Synthetic resins: XV. Chelation ion exchange properties of 2,4- dinitrophenylhydrazone of resacetophenone-formaldehyde resin

A number of copolymers were synthesised by condensing the 2,4-dinitrophenylhydrazone of resacetophenone with substituted benzoic acids/ phenols and formaldehyde in the presence of sodium hydroxide or hydrochloric acid. The decomposition temperature, solubility and viscosity of the polymers have been determined. The ion-exchange properties have been studied by using a batch equilibrium method. The distribution of a number of metal ions between an aqueous solution and the resin have been measured. A wide range of pH and variable ionic strengths have been investigated.     

Planning the GMAW process by constraint propagation

Although the gas metal arc welding (GMAW) process is widely used for joining metals, its planning is still a cumbersome task. The planning procedure involves many complex interrelationships among the process variables and depends heavily on empirical knowledge. Therefore, a solution method that allows a convenient way to represent the domain knowledge and evaluate the process variable relationships is needed. Further, the lack of a strong domain theory to quantify these interrelationships is a deficiency in the planning of the GMAW process. This paper presents a solution method that overcomes this deficiency and introduces a convenient knowledge representation scheme. The solution method considers the planning procedure to be a constraint satisfaction problem (CSP). The AC-4 algorithm is used to obtain arc consistency among nodes in the constraint network and the PC-4 algorithm is applied to obtain path consistency in the network. A modified version of the AC-4 algorithm is developed to reduce the search space and correspondingly reduce the computation time. An example is presented to demonstrate the capability of the method and its potential to reduce lead time.     

Retention of gallium ions from acidic solutions by pyridine strong‐base anion exchangers

Using the batch method, the retention of Ga(III) from HCl solutions by two gel‐type pyridine strong‐base anion exchangers containing 1‐methyl‐ or 1‐butyl‐4‐vinylpyridinium chloride structural units, called S₁ and S₂ resins, respectively, was studied. The influence of the HCl and Ga(III) concentrations as well as of the contact time between the resin and the liquid phase was investigated. The parameters, which characterize the retention process, were estimated using Langmuir and Freundlich isotherms. Both resins exhibited a higher affinity for gallium ions from a 6M HCl solution. According to Langmuir isotherms, maximum retention capacities of 44.44 and 60 mg Ga(III)/g dry resin for the S₁ and S₂ resins, respectively, were obtained. Freundlich isotherms provide additional proof for a higher affinity of the S₂ resin for Ga(III) from HCl solutions. It is clear that the substituent length increase on N⁺ atoms led to an increasing affinity of the pyridine strong base anion exchangers toward Ga(III). © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 86: 3440–3444, 2002     

炉壁集束碳氧枪在电炉中的应用

介绍了鄂钢电炉厂70t consteel 电炉使用炉壁集束碳氧枪后对经济指标的改善,以及在生产实践中的冶金效果.