W90钢丝圈缠绕机设计

采用电气机转换技术设计制造了Ｗ９０型钢丝圈缠绕机。该缠绕机结构简单、动作精确、布局合理、操作方便、维修容易。经实用证明，该机生产能力强、控制先进可靠，是一成功设计。     

Smart grid coordination in building HVAC systems: EMPC and the impact of forecasting

Energy consumption by heating, ventilation, and air conditioning (HVAC) systems exhibits a clear correlation with electricity prices. The method of economic model predictive control (EMPC) can be used in conjunction with thermal energy storage (TES) to time-shift power consumption away from periods of high demand to periods of low energy cost. Dynamic electricity pricing and weather condition forecasts can be readily incorporated within this methodology. Unfortunately, the receding horizon nature of this control strategy makes it very susceptible to the quality of the forecasts used. To this end, the development and implementation of several forecasting methods will be discussed. Finally, the EMPC performance of these methods will be assessed on a simple building example using active TES.     

压缩感知中高斯矩阵的优化研究

为了优化高斯矩阵,对部分哈达玛矩阵与高斯矩阵的统计学参数作了对比分析,确定了导致部分哈达玛矩阵信号重构能力好的主要因素,并提出了高斯矩阵优化算法.验证了优化算法对不同规模高斯矩阵的通用性和有效性,确定了优化矩阵对各种稀疏信号重构算法的适用性.最后对优化矩阵的性能作了初步的理论和实验分析,优化矩阵的信号重构能力可达到、甚至超过哈达玛矩阵.研究成果为测量矩阵的分析、设计和优化提供了新的思路和方法.     

基于环境选择和配对选择的多目标粒子群算法

为了使多目标粒子群算法中种群粒子能够快速地收敛于怕累托最优边界,针对标准多目标粒子群算法中缺乏粒子评价标准以及种群个体历史最优值位置和全局最优值位置选择问题,提出了一种基于环境选择和配对选择策略的多目标粒子群算法.该算法在每次迭代时,采用SPEA2中的环境选择和配对选择策略及适应度值计算方法,以此来提高种群粒子之间的信息交换力度,减少标准多目标粒子群算法中大量的随机性,使种群粒子能够更快速地收敛于怕累托最优边界.经典测试函数的仿真实验结果表明,在标准多目标粒子群算法中运用SPEA2的环境选择、配对选择策略和适应度值计算方法,能够使种群粒子更快速地收敛于帕累托最优边界,验证了算法改进的可行性和有效性.     

ACE中设计模式在分布式网络服务中的应用研究

以网关应用服务的构建为例,详细探讨如何利用Acceptor-Connector模式来构建分布式网络服务的过程。通过分析其构造过程可知,利用Acceptor-Connector模式可提高程序的灵活性、可扩展性,减少重复开发代码工作量。     

氯丁橡胶并用高苯乙烯树脂及其在齿形胶带中的应用

对氯丁橡胶并用高苯乙烯树脂进行了实验，通过正交试验法对硫化体系做了优化选择，确定了制作齿形胶带的最佳配方，提高了胶带使用寿命。     

注塑车间布局的设计及优化

注塑车间布局设计应以工艺流程为基础,根据生产物流的特点建立合理的车间物理布局。本文还进一步阐述了注塑车间布局优化的方法,以及节能和环境保护的措施。     

纳米铜锰复合氧化物固相反应法的制备与表征

以乙酸铜、乙酸锰与草酸为原料,采用固相化学反应法制备了纳米铜锰复合氧化物前驱物,利用均匀设计考察了微波功率与加热时间、热分解温度及时间对产物粒径的影响。研究表明热分解温度对产品粒径的影响最大。最小粒径产物的制备条件是：微波功率540 W,微波加热时间15 min;热分解温度370℃,热分解时间2 h。XRD和TEM分析结果表明,此产品主要物相为Cu1.5Mn1.5O4,结构属立方晶系,空间群为Fd3m,平均粒径16.9-19.0 nm。应用TG-DTG和DSC技术研究了纳米铜锰复合氧化物的热分解过程以及热分解动力学,采用Ozawa积分法和Coats-Redfern积分法得前驱体的热分解机理函数均为G（α）=[-ln（1-α）]^2/3。     

基于中心复合设计的振荡热管传热性能分析

Oscillating heat pipes （OHPs） are very promising cooling devices. Their heat transfer performance is affected by many factors, and the form of the relationship between the performance and the factors is complex and non-linear. In this paper, the effects of charging ratio, inclination angle, and heat input and their interaction effects on heat transfer performance of a looped copper-water OHP are analyzed. First, suppose that the relationship between the response and the variables approximates a second-order model. And use the central composite design to arrange the experiment. Then, the method of least squares is used to estimate the parameters in the second-order model. Finally, multivariate variance analysis is used to analyze the model. The results show that the assumption is right, that is to say, the re- lationship is well modeled by a second-order function. Among the three main effect variables, the effect of inclination angle is the most significant, but their interaction effects are not significant. In the range of the considered factors, both the optimum charging ratio and the optimum inclination angle increase as the heating water flow rate increases.     

反应型共聚物相容剂在聚合物合金中的应用

反应型共聚物相容剂所含的反应官能团与共混物中聚合物的相关的官能团发生化学反应，从而改善不相容聚合物共混物的相容性。本文介绍了反应型共聚物相容剂的分子设计，合成及其应用。