炼油厂价值链分析与优化

运用价值链分析方法对炼油厂内、外部的价值活动进行了分析,将炼油厂内部价值链划分为主生产作业链、辅助生产作业链和辅助价值链三部分,通过分析指出产品结构不合理、炼油成本较高是影响炼油业务价值的主要原因,针对企业实际情况,提出价值链优化调整策略:提高炼油技术水平,优化装置结构和产品结构,增产高附加值产品,不断提高企业经济效益。     

光催化氧化法处理印染废水的研究

对TiO2光催化氧化处理印染废水的可行性进行了试验研究，探讨了CODCr去除率和脱色率随反应时间的变化规律及催化剂用量，光强，初始pH值，H2O2浓度的影响。     

单参数Wilson方程预测C_9-DMP体系汽液平衡

根据实测γ~∞_1用单参数Wilson方程预测均三甲苯-DMP和偏三甲苯-DMP二元体系汽液平衡,并推算均三甲苯-偏三甲苯-DMP三元体系的汽液平衡,与实测数据比较,均获得良好结果。     

Axial characterization of catalytic activity in close-coupled lightoff and underfloor catalytic converters

A exhaust system consisting of a close-coupled Pd technology 32 in³ lightoff converter and Pt/Rh technology 170 in³ underfloor converter was vehicle-aged for 56000 miles on a vehicle equipped with a 3.8 l engine. Following this aging, the converters were taken off the vehicle and cut into 1″ thick sections along their axis and characterized for lightoff and warmed-up activity using a laboratory reactor to simulate vehicle exhaust. Each section was also analyzed for the quantity of oil additive poisons (phosphorus and zinc) deposited. Following this initial characterization, the phosphorus and zinc deposits were removed, and the sections were characterized again for lightoff and warmed-up activity. This procedure was used to qualitatively determine the relative contribution of oil additive poisoning and thermal sintering to the total activity deterioration as a function of axial position in the catalyst monoliths.

Analysis of the lightoff converter as taken from the vehicle showed a dramatic axial gradient in the lean and stoichiometric lightoff and warmed-up (600°C) performance for HC, CO and NO_x, with most of the deterioration having taken place in the forward-most 1″ section of the converter, which was consistent with the gradient in the deposition of phosphorus (P) and zinc (Zn) in this converter. Comparison of these data sets with those obtained after removal of the P and Zn poisons indicates that most of the total deterioration of lean HC and CO activity can be attributed to P and Zn poisoning of the forwardmost 1″ section. When tested under stoichiometric conditions, most of the deterioration of HC activity is attributable to P and Zn poisoning, while most of the deterioration of CO and NO_x activity is attributable to thermal deterioration. A similar activity and poison deposition gradient was detected in the underfloor converter, but to a smaller extent.     

光催化剂SrTiO3的制备及其性能的研究

论述用化学液相共沉淀法制备SrTiO_3的最佳条件,及在不同的活化条件下对SrTiO_3光催化性能的影响。此外还研究了掺入过渡金属氧化物对SrTiO_3催化性能的改善。     

Determination of the solubility parameter of poly(ethylene oxide) at 25°C by gas-liquid chromatography

The solubility parameter of poly(ethylene oxide) at 25°C has been determined using the method developed by DiPaola-Baranyi and Guillet, by the extrapolation of the values of the interaction parameter χ, at high temperatures, ranging from 70°–90°, 90°–110° and 110°–130°C down to 25°C. The values of the solubility parameter obtained, depending on the temperature ranges employed, are 9.8, 9.9 and 10.1, respectively.     

1,2,4-三氮唑并[1,5-α]嘧啶类衍生物的研究进展

本文概述了三氮唑并嘧啶磺酰胺、三氮唑并嘧啶硫代乙酰芳胺和三氮唑并嘧啶硫醚等三个系列的三氮唑并嘧啶类衍生物的国内外最新研究进展。     

用单一非等温DSC曲线评价FAE复合燃料内相容性的研究

尝试了用炸药组分的单一非等温DSC曲线来确定一次引爆型FAE复合燃料的热分解动力学参数，并据此来评价该复合燃料的内相容性。通过对比可以发现，该方法处理的结果与传统的Ozawa方法处理结果误差很小。实验结果也表明一次引爆型FAE药剂具有良好的内相容性。     

基于改进自由体积和无规因子贡献的聚合物热力学模型

给出了一个基于改进的自由体积和无规因子的聚合物溶液热力学模型，其无规因子项(NRF)用来描述聚合物溶液中聚合物与溶剂的局部交互作用对剩余Gibbs自由能的贡献，改进的自由体积项(Entropic-FV)用来描述聚合物溶液的混合效应对剩余Gibbs自由能的贡献。文中对45组二元聚合物与溶剂体系进行了关联计算，并与Zafarani-Moattar模型，Flory-Huggins模型和UNIFAC-FV模型的计算结果进行了比较，其平均绝对误差分别为1．910％，2．465％，3．738％和10．149％。     

纳米白炭黑的表面改性及其在氯丁橡胶中的应用

研究纳米白炭黑经硅烷偶联剂(Si-75)湿法改性后对氯丁橡胶抗疲劳性能的影响，并对改性剂的用量、改性工艺条件进行了优化。实验结果表明：适当改性后的纳米白炭黑可显著提高氯丁橡胶的抗撕裂和抗疲劳性能。