催化剂烧炭再生模拟和分析

催化剂烧炭再生是非定态过程。本文建立了绝热反应器内催化剂烧炭模型,利用移动边界正交配置法求解。以结炭的BO2催化剂再生为工作反应,模拟预测与实验值吻合良好。模拟计算表明,用递升进口温度序列烧炭,使再生时间明显缩短。     

阳光下TiO2/GAC光催化处理洗涤剂废水的研究

利用太阳光作光源，采用固定在颗粒活性炭中的TiO2(TiO2／GAC)作光催化剂，利用其将活性炭极好的吸附性与TiO2优良的光催化性能结合于一体的特性，设计了对以洗衣粉配置的洗涤剂模拟废水的两种处理方案：同时光照-吸附法和吸附饱和-光照水洗再生法，并在实验基础上对两种方案的一些性能进行了讨论。     

Charge reduction and regeneration in K+, Na+, Mg2+, Ni2+ and Co2+-exchanged Wyoming Bentonite

Controlled calcination of ion-exchanged Wyoming Bentonite in the presence and absence of ammonia leads to layer charge reductions. Detailed chemical analyses of both unexchangeable and exchangeable species lead to the conclusion that in no case is there migration of the original interlamellar cations into the octahedral region of the layers although, in terms of ionic radius alone, Mg²⁺, Ni²⁺ and, possibly Co²⁺, might be expected to do so. The production of unexchangeable Mg, Ni or Co, is identified as resulting from high temperature hydrolysis leading to hydroxide or oxide formation.     

石墨烯基气凝胶的制备及油吸附性能研究进展

海上漏油的频繁发生以及采油废水、工业含油污水的大量排放造成水资源大片污染和生态系统平衡的严重破坏。目前，从水体中分离油品和有机污染物已受到越来越多的商业和学术的关注。石墨烯基气凝胶是由二维石墨烯片层组装成的三维宏观材料，因其孔隙率高、比表面积大、密度低、机械性能强等特点在油水分离领域具有广阔的应用前景，已成为当今的研究热点之一。本文结合最新研究进展系统地总结了石墨烯基气凝胶的结构设计、组装及干燥方法，归纳了近年来其在油水分离中的应用进展，并对石墨烯基气凝胶在油水分离领域的研究现状和未来研究方向做了简要评述，以期为该领域的深入探索提供新的视角。     

离子交换法处理含Cr(Ⅵ)废水的研究

采用201×7强碱性阴离子交换树脂处理模拟含Cr(Ⅵ)废水,探讨了废水酸度、交换时间、浓度对Cr(Ⅵ)去除率的影响以及树脂再生所需的合适温度和再生剂浓度。结果表明,201×7强碱性阴离子交换树脂处理模拟含Cr(Ⅵ)废水,具有交换容量大、交换效果好、树脂再生条件较简单等优点。并对实际含铬废水进行了处理,废水中Cr(Ⅵ)的初始浓度为1 540 mg/L,处理量达52 BV(床体积)时,出水中Cr(Ⅵ)的浓度仍小于0.5 mg/L,达到国家排放标准。树脂交换容量约80 mg/g。用8%NaOH溶液,在50℃条件下进行再生效果较好,再生率大于95%,可实现树脂的重复使用。     

Nano-sized carbon hollow spheres for abatement of ethylene

In this paper, the ethylene adsorption capacities of the nano-sized carbon hollow spheres (CNB) and active carbon (AC), the Pd (PdCl₂) impregnated CNB or AC (Pd/CNB, Pd/AC) and heat treatment under various conditions, were studied at different ethylene concentrations from 64 to 1060 ppm. The results indicated that AC had a good ethylene adsorption capacity at high ethylene concentration. Pd impregnation decreased the ethylene adsorption capacity of AC. Heat treatment and H₂ activation could increase the ethylene adsorption capacity, but also lowered than AC itself. CNB had lower ethylene adsorption capacity than AC, but heat treatment and H₂ activation could increase its ethylene adsorption capacity markedly. With activating condition from heat treatment in N₂ at 300 °C to activation in H₂/N₂ at 100 °C, to activation in H₂ at 200 °C, and to activation in H₂ at 300 °C, the ethylene adsorption capacity of Pd/CNB was increased regularly. At low ethylene concentration, viz., 64 ppm, the ethylene adsorption quantities (q _a) by Pd/CNB activated in H₂ at 200 or 300 °C were higher than any other adsorbents. So, activated in H₂ atmosphere at higher than 100 °C, Pd/CNB is particularly advantaged for adsorbing low concentration of ethylene. Amongst all the adsorbents used, Pd/CNB activated in H₂ atmosphere at 300 °C for 2 h has the highest ethylene adsorption capacity at lower concentration than 125 ppm. In addition, all the CNB, Pd/CNB, AC, and Pd/AC samples can be easily regenerated in airflow for more than 3 h.     

流动床离子交换工艺在己二酸催化剂回收中的应用

介绍流动床离子交换装置回收催化剂的生产工艺，从交换装置的选择到运行，分析了流动床的优点、影响因素以及生产中应注意的问题和要求。     

废橡胶再生技术研究进展

综述了废橡胶再生利用的技术和方法，介绍了废橡胶的物理再生、化学再生的再行剂和微生物再生方法及进展，并对化学再生助剂、植物再生剂和生物再生助剂的再生效果进行了系统评述。