Characterization of EBPVD micro-layer composites and simulation of its internal stress state

Based on the basic operating principal and the technology characteristic of electron beam physical vapor deposition(EBPVD) technique, EBPVD was used to prepare the micro-layer composites. The effect on the substrate preheating temperature was taken into accounts and the finite element analysis package ANSYS was used to simulate the internal stress field and the potential displacement changing tendency. The results show that one of the most important quality factors on the judgment of micro-layer composites is the adhesion between the substrate and the deposition layers as well as among the different deposition layers. Besides the existance of temperature gradient through the thickness of layers, the main reason for the internal stress in micro-layer composites is the mismatch of various properties of the layer and the substrate of different thermal expansions and crystal lattice types. With the increase of substrate preheating temperature, the inter-laminar shear stress also takes on a tendency of increase but the axial residual stress decrease.     

CFRP强度复合Weibull分布的物理特征分析

本文对ＣＦＲＰ材料疲劳后剩余强度的复合Ｗｅｉｂｕｌｌ分布的物理特征进行了初步分析。指出树脂基复合材料失效（破坏）机理的双重性（基体和纤维失效模型）决定了剩余强度（累积损伤程度）测试结果的分布特征。复合Ｗｅｉｂｕｌｌ分布曲线的特征与分析结果对设计、使用及材料研究都有重要参考意义。     

柔性冗余度机器人残余振动主动控制

研究柔性冗余度机器人的残余振动主动控制问题，设计了具有压电作动器与应变传感器的机敏杆件，建立了受控系统的状态空间表达式，采用独立模态空间控制理论设计LQR状态反馈控制器，并基于对偶原理设计了具有指定收敛特性的Luenberger全维状态观测器，最后，以平面3R柔性冗余度机器人为例进行了计算机仿真，结果表明，采用这种主动控制方法可以显著改善柔性冗余度机器人的动力学品质。     

线加权余量法及其在正交异性板弯曲分析中的应用

利用有限差分法对控制方程和边界条件进行半离散化,使其定义在一些离散线上,然后采用加权余量法求解。这就是本文提出的线加权余量法,也可称之为有限差分-加权余量分维耦合法。文中以正交各向异性薄板弯曲平衡问题为例推导了有关具体算式,给出了数值算例,说明了本文方法的有效性。     

疲劳裂纹的灰色残差预测

借助灰色理论，建立了预测疲劳裂纹扩展的灰色残差预测模型，并应用此模型预测了某不锈钢构件腐蚀疲劳裂纹的扩展，得到了较高精度的预测结果，为疲劳裂纹预测提供了一种简易而可靠的新途径。     

Thermomechanical Models of Irreversible Finite Deformation of Anisotropic Solids

The proposed models for irreversible finite deformation of initially anisotropic solids are based on the hypothesis of the parameters of state, for which the authors have chosen a universal parameter (temperature) and a strain component, which is analogous to volume strains in an isotropic body and represents thermal strains of an unconstrained (stress-free) anisotropic solid. The application of this hypothesis allows the strain tensor to be resolved into a reversible and irreversible components. For irreversible processes of finite deformation of hardenable materials, the authors have proposed a deformation-type model, which makes it possible to describe a change in the type of anisotropy of initially anisotropic materials in the course of deformation. For the flow-theory-type model, the limiting state function, as given in the space of irreversible strains, allows for the experimentally observed plastic flow of anisotropic crystals under the action of hydrostatic pressure only.     

Determination of Discrete-Structure Parameters of Coatings with Allowance for Residual Stresses

The authors suggest that the dimensions of a discrete section of a coating should be chosen on the basis of calculation of the critical crack spacing in cohesion cracking. This approach allows for residual stresses in the coating. The reliability of the calculation method has been verified experimentally by direct measurement of the crack spacing.     

混凝土多轴应力状态下的徐变研究

在搜集国内外有关资料的基础上,通过对混凝土在多轴应力作用下的徐变与强度关系分析,说明在多轴应力状态下不能简单地采用叠加原理。展示了新的三轴徐变量测仪器及其徐变试验成果以及2组多轴与单轴应力状态下的徐变恢复试验成果,并对试验数据进行比较分析,得到多轴应力状态下徐变恢复与应力大小以及持荷时间之间的规律,证实了多轴应力状态下的徐变恢复与已经产生的压缩徐变有密切的关系。     

Residual Stress Simulation of Injection Molding

In this study, distribution and history of residual stresses in plaque-like geometries are simulated based on linear thermoviscoelastic model, which helps to understand the mechanics and evolution of the residual stresses in the injection molding process. The numerical calculation of direction, combined with the specified boundary conditions. Results show that the stress variation across the thickness exhibits a high surface tensile value changing to a compressive peak value close to the surface, with the core region experiencing a parabolic tensile peak. Residual stress distribution throughout the thickness is almost same along the flowpath and the final residual stresses value near the gate is lower than the value near the end of flowpath.