核磁共振测井在桩1区块底水稠油油藏开发中的应用

针对桩1区块特高含水期底水稠油油藏的开发特点,利用核磁共振测井资料定量评价其孔隙流体流动特性,准确划分产层,直接识别油、水层,准确地评价了区块剩余油分布情况.依此部署了水平井,取得了很好的开发效果.实践证明,核磁共振测井具备常规测井所不具备的某些技术优势,能解决一些特殊的地质问题,有广泛的应用前景.     

Effect of plasticity on the residual stress measurement using the groove method

The mechanical methods based on milling rectilinear or annular grooves on a component's surface and measurement of relaxed strains are some of the most used semi-destructive methods for the determination of residual stresses. These are evaluated from the relaxed strains by means of equations based upon the linear elastic theory. In this paper the errors due to yielding localised at the bottom of the groove have been investigated. The analyses were carried out by means of the finite element technique varying the most important parameters involved. The experimental results show a good agreement with the numerical ones.     

Short cue presentations encourage advance task preparation: A recipe to diminish the residual switch cost.

In the task-switching literature, it has frequently been demonstrated that although advance task preparation reduces the switch cost, it never really eliminates the switch cost. This remaining residual switch cost received much attention, and it has been argued that advance preparation is restricted in nature. In the present study, the role of task-cue presentation in the establishment of the residual switch cost was investigated. In 4 experiments, the cue was removed during the preparation interval, and it was hypothesized that this would encourage participants to complete advance task preparation. The results of all 4 experiments provided support for this hypothesis: When the cue was presented for a short time and then removed, the residual switch cost completely disappeared. This was found for different cue types. Furthermore, Experiment 3 demonstrated that it was not the presence of the cue itself but merely differences in advance task preparation that caused the effects. This suggests that advance task preparation is not as restricted in nature as previously assumed. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

提高硬质合金工具使用寿命的研究

通过改变硬质合金剩余应力类型和状态，改善了硬质合金的性能，提高了硬质合金工具的使用寿命。     

凸轮的表面裂纹分析

本文对一凸轮的表面裂纹进行了分析。渗碳后表层残余奥氏体含量过高级网状碳化物导致该凸轮在精磨过程中出现了磨削裂纹，本文还提出了二次回火或冰冷处理等改进措施来防止磨削裂纹的产生。     

汽轮机转子热应力在线计算灰色数学模型

热应力计算中边界条件、物性参数和初始条件等模型输入参数的灰色特性，使得以近似点值为输入得到的计算结果缺乏准确性依据和度量，该文提出的灰色数学模型，用区间数代替近似点值建立灰色数学模型，得出热应力在线计算值的灰色描述，可以更好地符合工程计算需要。文中针对模型应用的复杂程度，以汽轮机转子为对象，对单纯灰边界问题给出了简单的端点计算法及其依据；对复合灰边界灰物性问题建立了差分格式的数学模型，应用区间高斯迭代算法，结合模型结构特点推导了简易的基于内包含不等式的算法，并且给出两种算法的数值算例对比。     

一种改进的灰度预测模型

灰色预测模型通常是GM模型,但预测精度有时不令人满意。在对模型GM做了进一步研究的基础上,提出了一个预测精度较高的新灰色预测模型,并从理论上证明了这种模型可以有效提高建模数据序列的光滑度。最后把此方法应用于东部某镇GDP的建模中,试验结果表明该方法是可行且有效的,所建模型的精度优于传统GM（1,1）模型的精度。     

基于最短路径树的优化生存时间路由算法

为提高无线传感网的生存时间,提出基于最短路径树的优化生存时间路由算法(LORA_SPT).该算法引入节点分类概念,构造基于链路能耗因子、自身节点剩余能量因子、邻居节点剩余能量因子和类型权重因子等多个因子的权值函数.针对不同类型的节点采用不同的权重因子,最后利用dijkstra算法完成最短路径树,所有节点沿着最短路径树将...     

纳米压痕法对304不锈钢残余应力的研究

利用纳米压痕法研究了304不锈钢的残余应力,采用Suresh理论模型恒定载荷时的公式计算残余应力,最大加载载荷依次为500μN、1 000μN、1 500μN、2 000μN、2500μN。结果表明,不锈钢硬度和弹性模量为定值,退火前后的硬度分别为5.3GPa和4.0 GPa,弹性模量分别为110 GPa和100 GPa。利用Ansys分析软件模拟了压痕过程,发现不锈钢在受压过程中有Sink-in现象发生。纳米压痕法测得了未退火不锈钢存在残余压应力,大小为381 MPa;用XRD测得了未退火不锈钢中有350 MPa±23 MPa的残余压应力,两种测量结果吻合良好,说明了纳米压痕法在残余应力测试时的准确性与可靠性。