3D velocity from 3D Doppler radial velocity

We present local least squares and regularization frameworks for computing 3D velocity (3D optical flow) from 3D radial velocity measured by a Doppler radar. We demonstrate the performance of our algorithms quantitatively on synthetic radial velocity data and qualitatively on real radial velocity data, obtained from the Doppler radar at Kurnell Radar station, Botany Bay, New South Wales, Australia. Radial velocity can be used to predict the future positions of storms in sequences of Doppler radar datasets.© 2005 Wiley Periodicals, Inc. Int J Imaging Syst Technol, 15, 189–198, 2005     

立体车库二次调节提升系统的节能特性与转速控制

介绍了立体车库二次调节静液传动提升系统的工作原理、特点和节能特性，并进行了转速控制的试验研究，得出了应用二次调节技术能够回收和重新利用系统的制动动能和重力势能，减小系统装机容量。     

解决废钢短缺是特钢业发展的关键

随着短流程炼钢的迅速兴起，废钢消耗量急剧增加，世界范围内废钢供应已经出现了严重缺口，我国每年须从国际市场进口大量废钢才能满足钢铁生产的供需平衡，在我国废钢已成为紧缺资源，影响着我国特钢业的发展。分析了这一形势，并初步探讨了解决这一问题的方法，建立合理的废钢储备及使用体系，使废钢资源合理化流动，同时积极探寻优质的废钢代用品，以便从根本上解决我国废钢短缺问题。     

水驱强度对油井压力动态的影响研究

建立了水驱强度影响下的水驱油渗流数学模型，在获得数学模型解的基础上，计算了考虑井筒储存、表皮效应以及水驱强度影响下油井的压力及压力导数典型曲线，分析了压力动态特征，通过这些研究为水驱油藏的试井分析提供了理论基础，为水驱油藏的识别提供了一种新的手段。     

催化裂化沉降器多臂式旋流快分系统封闭罩内的流场

用智能型五孔探针对催化裂化沉降器内多臂式旋流分离系统封闭罩内的气体流场进行了测试。测试结果表明，罩内流场为轴对称的三维湍流场，在旋流头喷出口处径向速度较大，呈短路流现象。根据流场测试结果，建立了三维气流速度分布的无因次计算式，可供工程设计参考。     

A continuum model for pumping performance of turbomolecular pumps in all flow regimes

In the present study a continuum model for one-dimensional plane Couette-Poiseuille flow is implemented to turbomolecular pumps in different flow regimes. Pumping performance of various turbomolecular pumps including 6 single rotors, a rotor-stator row, a rotor-stator-rotor row, and a multi-row with 13 alternative rotor-stator rows is considered here. The obtained results show that the model provides good quantitative values for pumping performance of turbomolecular pumps over the whole regimes ranging from molecular flow to transition to slip flow.     

A direct numerical simulation of transition phenomena in a mixed convection channel flow

This study intends to provide an increased understanding of the laminar-turbulent transition phenomena for the buoyancy-assisted heated vertical channel flow during the early transient stage. The spectral method with weak formulation is applied in the direct numerical simulation. Initial disturbances consist of the finite-amplitude two-dimensional TS wave and a pair of three-dimensional oblique waves for the K-type disturbances. The results from the harmonic energy competitions of different wave modes show that for the buoyancy-assisted heated flow, the (k_x=1, k_z=1) or (1,1) and (1,0) modes would gain energy immediately and start to rise at almost the same rate. This phenomenon is different from that of the buoyancy-opposed flow, where the (1,1) mode decays slowly in the beginning until other modes gain enough energy and then it begins to grow quickly and overtakes the (1,0) mode after a short time period. These different transition patterns match with the experimental results that the flow transition is supercritical and subcritical for the buoyancy-assisted and -opposed flows, respectively. Buoyancy-assisted heated flow transition follows the general trend of an isothermal flow in the beginning, but the thermal-buoyant force is crucial in accelerating the instability and also causing notable differences during the subsequent transition process. All of the results for the vortex structures development, kinetic energy budget of the disturbances, flow visualization by tagged fluid particles, and the local temperature fluctuations are consistent in pointing to a clear pattern for the buoyancy-assisted heated flow transition.     

Characterization of dynamic behavior of a spout-fluid bed with Shannon entropy analysis

Differential pressure fluctuation time series were obtained at different locations in a two-dimensional spout-fluid bed with a cross section of 300 × 30 mm and height 2000 mm. Shannon entropy analysis of differential pressure fluctuations was developed to characterize the dynamic behavior. Effects of two important operating parameters (spouting gas velocity and fluidizing gas flow rate) on the Shannon entropy were examined. It was demonstrated that a spout-fluid bed at a high spouting gas velocity or fluidizing gas flow rate was a deterministic chaos system since the Shannon entropies at all bed locations increased sharply and asymmetric unstable flows occurred. Shannon entropies were found to be significantly different at various bed locations. Shannon entropies of different flow regimes were distinct, so they were used to identify the flow regimes. The results show that the Shannon entropy helps to grasp the complex characteristics of dynamic behavior in spout-fluid beds.     

天铁炼钢厂四流中间包流场的水模实验及优化

介绍了天铁炼钢厂中间包水模实验原理和过程，分析了斜、直、圆三种型式挡渣墙模拟结果，提出了合理的挡渣控流方案，在生产实践中使用效果良好。