射流流化床内流体力学行为的模拟研究

以流化床应用为代表的气固流动系统是许多化工过程中的重要组成部分 ,CFD( computational fluid dynamics)方法能够为其优化设计和放大提供所需要的信息 .本文采用双欧拉模型 ,与 Gidaspow等的实验结果进行了对比 ,模拟了二维射流流化床内气泡的形成规律 ,得到了带锥型分布器的流化床内瞬时空隙率和气固相速度分布等流体力学参数 .对锥型分布器流化床的实验结果表明 ,模拟得到的气泡的形状与实验现象相接近 .     

Modeling of fast pulse responses in the Multitrack: an advanced TAP reactor

A detailed transport model for the Multitrack setup, a TAP-like system, has been developed, which allows further analysis of adsorption, diffusion and catalysis phenomena. This includes the transport in the void part between the pulse valve and the reactor inlet. The effects of viscous flow and thermal transpiration, aspects that have not been studied in detail before for this type of setup, have been analyzed. A new expression for the modeling of the output signal is proposed depending on the positioning of the MS detector used in the study. The transport parameters of the model have been estimated by the analysis of the experimental pulse responses of the empty reactor system and the reactor charged with an inert packed bed. The proposed model reproduces the experimental pulse responses very well, and therefore can be extended to study systems with reacting or adsorbing beds by including the corresponding rate equations for the processes occurring in the bed of particles.     

Important issues in a molecular dynamics simulation for characterising the mechanical properties of carbon nanotubes

This paper discusses several important issues in a molecular dynamics simulation for analysing carbon nanotubes and their mechanical properties. In particular, the paper addresses the problems in selecting appropriate inter-atomic potentials, number of thermostat atoms, thermostat techniques, time and displacement steps and number of relaxation steps to reach the dynamic equilibrium. Based on these, the structural changes of armchair and zigzag nanotubes and their mechanical properties are investigated. The Young's modulus and Poisson's ratio of the armchair tube are 3.96 and 0.15 TPa, respectively, and those of the zigzag tube are 4.88 and 0.19 TPa, respectively. The best simulation technique identified in this study predicts that the ultimate tensile strain of a carbon nanotube is around 40% before atomic bond breakage.     

Interbay物料自动搬运系统性能分析

Interbay物料自动搬运系统的运行效率对于晶圆制造系统影响较大,研究Interbay物料自动搬运系统的绩效具有较大的意义[1]。该文以带有捷径的单闭环背脊式布局的物料自动搬运系统为研究对象,通过问题描述,简化、假设将实际问题抽象为导引运输模型。然后,建立数学模型,采用Dijkstra算法确定工件搬运的最短路径。最后,利用Arena仿真软件建立含有导引运输设备的模型,采用控制变量法探究小车数量小车占用轨道的方式、调度规则等因素对于产出的影响,发现对于本文中的模型,其它条件相同时,搬运系统采用Release-at-end的控制方式,系统最大搬运量越大。     

Analysis of junction temperatures in high-power GaN-based LEDs

We presented the analysis of the incomplete conduction in bonding medium in high power GaN-based light-emitting diode (LED) packages. A numerical study was carried out with parametric model to understand the junction temperature variation due to bonding medium defects. Transient thermal measurement was performed to evaluate LED’s junction temperature. Thermal resistance from chip to lead frame was 20 K/W in our sample LED. It was suggested that only 60% of the surface area of the bonding medium was involved...     

层次约束结构的虚拟装配建模技术

为了解决虚拟环境下装配建模在信息完备性和模型复杂性等方面的问题,提出了一种基于层次约束结构的虚拟装配模型.该模型分为产品层、部件层、零件层、特征层、几何面层和面片层来表达,不同层元素之间存在层次映射关系,同一层元素之间存在约束关系.通过CAD系统和虚拟装配系统之间的数据转换,实现了虚拟装配模型的生成算法,并给出了根据虚拟装配模型生成的虚拟装配场景图的结构.基于层次约束结构的虚拟装配模型具有信息表达完备,信息集成度高,满足实时性要求等优点,同时还能与CAD系统和虚拟装配场景图实现集成.实例验证了虚拟装配建模的有效性.     

圆管层流脉动流动的数值模拟

为研究圆管层流脉动流动特性,建立了二维非稳态轴对称模型,对壁温恒定、入口速度周期性变化的流体进行数值模拟.分析了速度振幅和频率对层流流动的影响,得到了频率和振幅对压力、温度、壁面摩擦系数影响的规律.研究表明:脉动流动时,压力、温度、壁面摩擦系数围绕相同Re下稳态流动时的数值波动;压力与速度之间存在相位差;压力、壁面摩擦系数的波动与速度振幅和频率成正比;温度的波动与速度振幅成正比,与频率呈反比;当流体脉动的频率和振幅足够大时,会在近壁面处出现回流,并且出现回流的时间会随着频率和振幅的增大而增长.     

悬挂式重力补偿系统精密跟踪方法

介绍了一种用于研究空间机器人微重力条件下的工作特性的悬挂系统——悬挂式重力补偿系统,并给出了悬挂模块的动力学模型.通过数值求解与仿真,运用非线性规化求出了一定条件下的最优控制参数;用正交试验寻优、基于时间最优控制的试凑法证明了优化模型的解正确性.该研究为空间机器人地面试验系统模拟微重力环境下精密跟踪运动提供了最优控制方法.     

压电双晶片型旋转精密驱动器动态特性和控制

提出了以自由端带有集中质量的悬臂式压电双晶片为驱动单元的新型冲击式旋转精密驱动器.制作了驱动器样机,建立了基于Lugre摩擦模型的驱动器动力学模型.对驱动器动态特性进行了仿真分析和实验对比研究.根据驱动器的动态特性,提出了冲击式压电双晶片型精密驱动器特定的定频调压控制方法.仿真分析结果和实验结果吻合较好,表明该动力学模型符合驱动器的动态特性,可用于对冲击式压电双晶片型旋转精密驱动器的理论分析.