Electrodeposition of Ni-Co-Fe2O3 composite coatings

Ni-Co-Fe₂O₃ composite coatings were electrodeposited using cetyltrimethylammonium bromide (CTAB)-modified Watt’s nickel bath with Fe₂O₃ particles dispersed in it. The effects of the plating parameters on the chemical composition, structural and morphological characteristics of the electrodeposited Ni-Co-Fe₂O₃ composite coatings were investigated by energy dispersive X-ray (EDS) spectroscopy, X-ray diffractometry (XRD) and scanning electron microscopy (SEM). The results reveal that Fe₂O₃ particles can be codeposited in the Ni-Co matrix. The codeposition of Fe₂O₃ particles with Ni-Co is favoured at high Fe₂O₃ particle concentration and medium stirring, and the deposition of Co is favoured at high concentration of CTAB. Moreover, the study of the textural perfection of the deposits reveals that the presence of particles leads to the worsening of the quality of the observed 〈220〉 preferred orientation. Composites with high concentration of embedded particles exhibit a preferred crystal orientation of 〈111〉. The more the embedded Fe₂O₃ particles in the metallic matrix, the smaller the sizes of the crystallite for the composite deposits.     

纳米Al2O3改性PVDF超滤膜的制备及其抗污染性

为改善聚偏氟乙烯(PVDF)超滤膜的水通量和抗污染性能,以无机纳米氧化铝粒子作为添加剂与PVDF共混,采用相转换法流延成膜.用接触角测定仪测得膜与水的接触角用以表征膜的亲水性的变化;用扫描电镜(SEM)和透射电镜(TEM)观察膜的表面孔分布和断面孔的结构及纳米颗粒在膜中的分散情况;采用万能电子试验机(W-56)强度测定仪测定膜的机械性能;利用杯试超滤装置对改性膜的抗污染性能进行研究,并对污染膜上的污染物进行了气相色谱和质谱分析.结果表明,纳米Al2O3的加入量(质量百分比)为2%时,改性膜具有较好的水通量、强度和抗污染性能;纳米Al2O3的加入没有改变膜的微观结构.改性膜在保持PVDF有机膜原有特性的基础上,通过改善PVDF膜的表面亲水性而使其通量和抗污染性能得到增强.     

温度和初始颗粒大小对絮体破碎再絮凝的研究

鉴于絮体的形成/破碎/再絮凝过程在适当条件下具有强化去除水中颗粒物的效果,研究温度和初始颗粒大小对絮体破碎再絮凝去除水中颗粒的影响.采用PDA2000透光率脉动检测仪对絮体破碎再絮凝过程进行在线监测.结果表明,在较低温度条件下,絮体破碎后能有较大的恢复率;初始颗粒越大,絮体大小恢复率越高,由较小初始颗粒产生的絮体经破碎后再絮凝其再生能力不如大颗粒,沉后水浊度与大颗粒相比不具有降低优势.当电中和机理占主导作用时,絮体破碎后能重新絮凝,絮体大小能恢复到破碎之前;而当网捕卷扫机理占主导作用时,絮体的恢复能力不如电中和条件,再絮凝能力降低.絮体破碎后再絮凝的沉后水浊度明显低于破碎前,水温对其结果的影响不大.絮体破碎后再絮凝,适用于较大的初始颗粒和较低水温.     

Microstructure and texture evolution during warm compression of the magnesium alloy AZ31

The evolution of the microstructure and texture with strain during compression at 150℃ of the magnesium alloy AZ31 has been investigated using the electron backscattered diffraction (EBSD) technique. The initial samples were chosen to have a strong basal plane texture with the crystal c-axes perpendicular to the compression direction. The EBSD data provide evidence concerning the relative activity of both {10-12} extension twinning and slip, and suggest that non-basal slip is important in samples deformed to a strain of more than 0.2. The relative contributions of the twinning and the slip during deformation have been discussed based on the results above.     

Numerical simulation of electroosmotic flow in hydrophobic microchannels

Electroosmotic flow (EOF) is a promising way for driving and mixing fluids in microfluidics. For the parallel-plate microchannel with the hydrophobic surface, this paper solved the governing equations using the finite element method (FEM), and the effects of microchannel height, electric strength and ionic concentration on EOF were thus investigated. The simulation indicates that the transient characteristics of EOF are similar in hydrophobic and hydrophilic microchannels, the steady time of EOF is proportional to the square of microchannel height, and the scale is microsecond. EOF velocity is proportional to the electric strength and independent of the channel height, and decreases slowly with the ionic concentration, which is lower than that in hydrophilic microchannel due to the presence of slip length in hydrophobic microchannel. The results can provide valuable insights into the optimal design of microchannel surfaces to achieve accurate EOF control in hydrophobic microchannel. Supported by the National Natural Science Foundation of China (Grant No. 50730007)     

干燥、粉碎一体化装置

本文对干燥、粉碎一体化装置的典型设备惰性粒子流化床干燥器进行剖析,介绍应用情况,并作了经济性评价。     

空间晶体生长流体效应的实验研究和理论分析

在空间晶体生长实时观察装置上，利用溶液中形成的铌酸钾微晶作示踪粒子，首次在空间高温氧化物熔液内，实时观察和记录了空间表面和力对流效应。利用测量的结果计算了熔体内空间表面张力对流的速度场，并与地面表面张力对流的速度场进行了对比，理论计算与实验结果基本吻合。探讨了空间均匀分布铌酸钾微晶的形成机理。结果表明：表面张务对流在空间晶体生长过程中起主要作用，是形成均匀分布胞状晶体的主要机理。     

Preparation of composite particles made from solid powders and wasted plastics by semichemical recycle method

Composite particles composed of solid powders and polymer were prepared by semichemical recycle of wasted plastics. Waste expanded polystyrene was used as raw materials of polymer matrix of composite particles. Both magnetite and silicon carbide powders were used as solid powders to give thermal and electric conductivity and magnetization, respectively. In the experiment, the oil‐phase dissolving expanded polystyrene was dispersed in fine droplets into the continuous water phase. Two kinds of powders were added at the same time or separately in the O/W dispersion. Composite particles were found to have the structure that polymer particle was covered with two kinds of solid powders. The mean diameter of composite particles and the content of each solid powder were strongly affected by the addition time when silicon carbide powder was added into the dispersion. Furthermore, it was found that the gradient adhesion layer due to two solid powders was able to be formed on the surface of polymer particle. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 88: 483–488, 2003     

赤泥催化剂的制备及其对模拟烟气中微量氨的脱除性能

以赤泥固废为原料，采用酸解-碱沉淀法制备了赤泥粉体催化剂，并提出一种将催化剂直接喷入SNCR尾气中的除氨工艺，考察了催化剂加入点温度、空速、NH₃浓度及水蒸气对氨去除能力的影响。研究发现，该催化过程具有很高的活性和N₂的选择性，450℃以上NH₃的转化率可达100%，同时在400～500℃间，N₂的选择性高于80%，达到了很好的除氨效果；在500℃，空速为3×10⁶~6×10⁶ h^-1之间时，出口NH₃浓度均为0；此工艺对于逃逸NH₃浓度的适用性较强，入口[NH₃] = 50×10^-6~1000×10^-6 mol/L范围内均可完全脱除，且具有一定的抗水能力。通过一系列表征发现，该种方法制备的赤泥催化剂不仅消除了原始固废的强碱性，还提高了其表面酸性，具有较高的比表面积、孔容和丰富的表面微观结构，使NH₃的吸附及活化反应能力大大增加；该催化剂过程遵循iSCR机理，在400～500℃温度区间主要发生NH₃-SCO反应，低于400℃主要发生NH₃-SCR反应，粉体催化剂通过NH₃-SCR和NH₃-SCO协同反应达到了去除尾气中微量氨的目的。