AlN 粉末制备的热力学分析和实验研究

对制备 AlN 的体系 AlCl_3-NH_3-N_2进行了热力学分析,确立了 AlN 粉末合成所需要的热力学条件.在700～1000℃下,利用无水 AlCl_3和 NH_3的化学气相淀积反应合成得到了高纯 AlN 超细粒子粉末,研究了反应温度、AlCl_3浓度和总流量等对 AlN 粉末理化性质的影响.实验确立了产物低温和高温热处理条件.     

SiC粒子增强铸造Al基复合材料的研制

本文用真空烘烤封罐法对 SiC 粒子进行预处理,在固液两相区内搅拌添加,制造了铸造 Al 基复合材料。测试表明,该复合材料具有铸造性能好,力学性能高的优点,适用于采用压铸、石膏型精密铸造、金属型铸造等工艺方法成型的活塞、连杆等要求苛刻的零件。     

颗粒增强TiAl基复合材料及其Si的韧化作用研究EI

运用ＸＤ工艺制备了颗粒增强ＴｉＡｌ基复合材料。增强颗粒均匀分布于ＴｉＡｌ基体中并细化ＴｉＡｌ合金。通过在ＴｉＢ_２／ＴｉＡｌ、ＴｉＣ／ＴｉＡｌ复合材料中加入适量的Ｓｉ，颗粒增强ＴｉＡｌ基复合材料的室温延性得到了改善。     

Handling of fine-particles by time-averaged particle driving method in plasmas

We developed a noble technique for the fine-particle handling in plasmas. In this method a pair of point electrodes are introduced in the plasma, to which positive pulses are applied alternatively. When the pulse repetition period is shorter than the particle response time, the particles feel only time-averaged force because of their large mass. Spatial profile of the equivalent potential of the time-averaged force varies from a circle to an ellipse with an increase in the local discharge at the electrodes. The particles are eventually transported toward a middle point between two point-electrodes, being almost independent of their initial positions. This method is quite effective for converging fine particles in the plasma.     

CYCLIC DEFORMATION BEHAVIOUR OF Cu SINGLE CRYSTALS ORIENTED FORDOUBLE SLIP Ⅱ. Persistent Slip Bands and Deformation Bands

用光学显微镜和扫描电镜研究了双滑移取向（［０３４］，［１１７］）Ｃｕ单晶循环饱和后的表面形貌，塑性分切应变幅（γｐｌ）低于１０~（－３）时，［０３４］晶体表面上要为主滑移系的驻留滑移带（ＰＳＢｓ）占据，次滑移只在边缘区域启动，其ＰＳＢｓ细窄（＜１μｍ），体积百分数在１％以下．γｐｌ＞１０~（－３）时，次滑移开始在试样的中部启动，同时，表面出现二种贯穿晶体的宏观形变带（ＤＢＩ，ＤＢＩＩ），滑移带在形变带内集中．［１１７］晶体在γｐｌ＝４．４×１０~（－４）时，双滑移现象已十分明显．γｐｌ＞１０~（－３）时，表面也形成与前者相似的形变带．ＤＢＩ的惯习面与主滑移面平行（［０３４］晶体）或接近（［１１７］晶体），ＤＢＩＩ的惯习面则与前者垂直，文章讨论了形变带形成的可能原因．     

Micron-Scale Soft Actuators Fabricated from Multi-Shell Polystyrene Particle-Gold Nanoparticle Nanohybrids

Actuators made of soft matter are needed for a variety of fields ranging from biomedical devices to soft robotics to microelectromechanical systems. While there are a variety of excellent methods of soft actuation known, the field is still an area of intense research activity as new niches and needs emerge with new technology development. Here, a soft actuation system is described, based on a core-multi-shell particle, which moves via photothermal expansion. The system consists of a novel polystyrene-based thermally expandable microsphere, with a secondary shell of a silicate-silane graft copolymer, to which gold nanoparticles are covalently linked. The gold nanoparticles act as photothermal nano-transducers, converting light energy into the thermal energy necessary for microsphere expansion, which in turn results in material movement. Actuation is shown in isolated particles in thermal and photothermal regimes using metal ceramic heaters or 520 nm laser illumination, respectively. Macroscale actuation is demonstrated by making a composite material of particles suspended in the transparent elastomer polydimethylsiloxane. The sample demonstrates an inchworm-like movement by starting from an arched geometry. Overall, this work describes a new particle-based actuation method for soft materials, and demonstrates its utility in driving the movement of a composite elastomer.     

SiC含量对SiCp/Al复合材料摩擦性能的影响

采用粉末冶金技术制备了SiC_p/Al复合材料,探讨了SiC颗粒质量分数对SiC_p/Al复合材料密度、布氏硬度、微观形貌以及摩擦磨损性能的影响。结果表明,SiC颗粒表面形成了少量可提高界面结合性的Al₄C₃化合物。随着SiC质量分数增加,SiC_p/Al复合材料的密度没有明显的变化,当SiC质量分数增加至25%时,密度明显下降。SiC_p/Al复合材料的布氏硬度随着SiC质量分数的增加呈先增长后减小的变化趋势。当SiC质量分数为20%时,材料的硬度最优（HBW 114）,平均摩擦系数达到最大值（0.3425）,摩擦后试样表面形貌平整且犁沟较浅,SiC颗粒未出现明显剥落。     

钽粉颗粒强度的研究

研究了采用激光粒度分布仪测试电容器级团化钽粉粒度分布及强度的方法。其中心内容是:先采用3种不同比表面积、松装密度和费氏平均粒径的钠还原原粉,按3种烧结工艺制得团化钽粉。然后把烧结得到的6种试样加入纯水中,以200～300r/min进行高速搅拌并以40W,42kHz超声波振动。将激光衍射分析仪的激光束穿过经不同搅拌时间的悬浊钽粉,测得不同时间的钽粉粒径分布曲线。分析分布曲线可以获得团化钽粉的一系列信息,包括:①几种团化钽粉颗粒的相对强度;②影响团化钽粉颗粒强度的因素;③钽粉强度和其他性能如介电损耗、流动性,平均粒径及密度的关系等。     

Flattening and solidification of thermally sprayed particles

In this article, molybdenum particles were plasma sprayed on copper, zirconia, and glass substrates. The impact of the molten particles was monitored using a fast two-color optical fiber pyrometer focused on a small spot on the substrate surface. The apparent duration of the flattening process and the cooling speed, both determined from the pyrometer signals, were found to depend on the substrate conditions and to vary with coating thickness. The substrate material and its roughness were also found to influence the texture in the sprayed coatings. Furthermore, a transient thermal flow numerical model was used to compute reliable thermal histories of the impinging particles and the underlying lamellae, the interfacial thermal resistance being determined by comparison of experimental thermograms with computed ones.     

快速凝固铝硅合金粉末加热过程中硅颗粒的粗化行为

利用差示扫描量热仪(DSC)、电子显微镜等设备对Al-12.8%Si合金粉末的原始状态及热处理后的状态进行了分析。发现其显微组织有两个连续的变化过程:在156℃时,固溶在基体Al中的过饱和Si开始析出,并在340℃发生粗化,随着加热温度的升高,粗化现象仍然存在。另外,对Si颗粒的粗化机理进行了研究,发现其粗化符合经典的LSW理论。