太阳辐照绝对辐射计的精密温度控制系统设计

为了提高太阳辐照绝对辐射计(SIARs)的测量精度,消除温度变化对SIARs测量精度的影响,研究设计了精密温度控制系统,对SIARs进行恒温控制;通过对铂电阻温度传感器自热效应的弱化,提高了温度测量的精度;提出了一种新的复合PID控制算法,该复合控制算法使系统获得良好的动态和稳态性能;使用密闭的高低温箱来模拟星上温度条件对系统进行了实验测试,实验数据表明,系统控制精度在0.1℃以内,可为SIARs工作提供稳定的温度环境。     

基于微电压调节的太阳能充放电系统设计

基于微电压调节的太阳能充放电系统,是以微控制器LPC1114为核心的太阳能电池板充放电电路,是实现高效率的智能充放电设计方案。微电压调节理论整合了经典电压回授法和多种太阳能最大功率点追踪思想,利用简单合理的DC／DC平衡技术,充分考虑系统功耗等问题,以简单的电路设计和创新的软件思想实现更高效率的太阳能系统。随着能源危机的加剧,高效率、低成本的太阳能系统备受社会关注,其在民用、交通等领域的运用也更加重要。     

全方位太阳辐照度测量系统设计

设计一种以DSP为核心的全方位太阳辐照度测量系统,利用安装在云台上的太阳能电池板的转动以获取全方位的太阳辐照度数据。通过对采集到的数据进行分析,既可以测试太阳能电池板在各种安装方式（如平放、斜放和幕墙）下的发电效率,又可对光伏建筑一体化的光伏电站建设方案进行评估,还可在建成之后对光伏电站的发电状态进行管理和监测。     

太阳能帆板输出功率短期预测研究

在卫星观测中,经常由于各种原因导致短时间内无法提取目标卫星数据,使控制系统无法继续对其保持高精度跟踪和控制。文章主要研究ARIMA模型在卫星遥测数据短期预测中的应用。使用Matlab软件进行ARIMA模型参数计算,再使用SPSS软件执行数据预测,并进行残差分析,通过实例验证,短时期内的预测数据精度较高。     

太阳风粒子数据映射模型的设计与实现

为了能够快速获得第三级太阳风粒子可分析处理的结构化数据,本文采用将数据映射到内存和采用语言集成查询技术解决数据的完整映射和快速访问。通过设计数据映射模型,将用PDS数据的数据标签和数据产品分别映射到模型的值域和属性域,解决本地或网络数据内存映射的问题。为测试这个实例,采用双倍缓冲和贝塞尔插值技术对数据能谱进行了实时绘制。结果表明该模型具有高效性、完备性和高吻合度。这个基于内存映射的模型能够较好地解决异构数据快速结构化数据访问的数据源动力不足问题,为进一步处理和分析太阳高能粒子的频谱、成份和通量及随时间、空间变化的分布特征等提供了基础。     

Fabrication of Nano-TiO2 Coating for Dye-Sensitized Solar Cell by Vacuum Cold Spraying at Room Temperature

Deposition of nanocrystalline TiO₂ coating at low temperature is becoming more attractive due to the possibility for continuous roll production of the coating for assembly lines of dye-sensitized solar cell (DSC) at a low cost. In this study, porous nano-TiO₂ coating was deposited by vacuum cold spraying (VCS) at room temperature on a conducting glass substrate using commercial P25 nanocrystalline TiO₂ powder. The microstructure of TiO₂ coating was characterized by field emission scanning electron microscopy (FESEM) and nitrogen adsorption test. A commercial dye (N719) was adsorbed on the surface of TiO₂ particles within the coating to assemble a DSC. The cell performance was evaluated by employing simulated solar light at an intensity of 100 mW/cm². The results showed that TiO₂ coating was deposited by the agglomerates of nano-TiO₂ powders. The Brunauer-Emmett-Teller (BET) test of the as-sprayed TiO₂ coating yielded a porosity of 49% and an average pore size of 17 nm. The assembled solar cell yielded a short-circuit current density of 7.3 mA/cm² and an energy conversion efficiency of 2.4%. The test results indicate that VCS was a promising method to deposit nanocrystalline TiO₂ coatings at low temperature applied to DSCs. This article is an invited paper selected from presentations at the 2007 International Thermal Spray Conference and has been expanded from the original presentation. It is simultaneously published in Global Coating Solutions, Proceedings of the 2007 International Thermal Spray Conference, Beijing, China, May 14-16, 2007, Basil R. Marple, Margaret M. Hyland, Yuk-Chiu Lau, Chang-Jiu Li, Rogerio S. Lima, and Ghislain Montavon, Ed., ASM International, Materials Park, OH, 2007.     

胍基阳离子捕收剂反浮选磷矿的性能与机理分析

为了研究磷矿反浮脱硅过程中,胍基阳离子磷矿捕收剂的作用机理,以N-椰油基-1,3-丙撑二胺、单氰胺、乙酸为原料制得一种阳离子表面活性剂,并用于傅里叶红外光谱仪表征,测试了该药剂与3种矿物作用前后的接触角、Zeta电位、红外光谱,进行了石英、白云石、胶磷矿的纯矿物浮选试验等。结果表明:该合成药剂属胍基阳离子表面活性剂,在广泛pH值范围内,对石英的捕收能力较强,对白云石次之,对胶磷矿较弱;在弱碱性下,对白云石捕收性能有所提高;相较白云石、胶磷矿,该药剂更易与石英产生吸附作用,使矿物表面呈现疏水性;接触角、Zeta电位、红外光谱测试结果说明与3种矿物的吸附主要是物理吸附。试验结果说明该胍基阳离子表面活性剂可以作为磷矿反浮脱硅捕收剂。     

光热电站容量效益评估及影响因素研究

光热发电作为一种清洁能源,配置储热后具有良好的调节性能,近年得到大力发展。依据自身经济性,光热电站往往配备较大的储热装置,能够平移所吸收的光热能,且具有跨日调节能力,使得光热机组有一定替代常规机组带负荷的能力,即容量效益。本文提出一种基于等可靠性的光热电站容量效益评估方法,考虑了调峰方式、储热时长、新能源规模、光热电站规模对光热电站容量效益发挥的影响,采用基于数学优化的生产模拟仿真程序,以周为尺度,计算全年8760 h的系统运行状态,计及了机组启停、水电跨日调节、抽蓄跨日调节、光热电站的跨日调节等因素。最后通过对西北地区实际电网的仿真,验证了所提方法的有效性。     

Collector matching in origin potential flotation

Through thermodynamic calculation and electrochemistry analysis~ taking the galena as example,the ba-sis for collector matching in origin potential flotation (OPF) was studied. The results of thermodynamic calculation show that the upper limit value of pH and flotation potential of diethyldithiocarbamate (DDTC) is higher than that of xanthogenate (KBX), which indicates that the collecting ability of DDTC for galena is better than that of KBX.The results of the interface capacitance analysis show that lead diethyldithiocarbamate (PbD2) is more steady than lead xanthogenate (Pb(BX)2) on the galena surface under the oxidation condition; the resistance analysis shows thatD2 (DDTC oxidizes into its dimmer) and dixanthogen (BX)2 will occur non-faradic desorption on the pyrite electrodesurface when the potentials are above 0.13 V and 0.2 V respectively. A synthetical criterion ΔE of collecting ability and selectivity was proposed. The results predicted by this criterion are confirmed through flotation experiments of ore.