Preparation and Compressive Stress Effect of Polymer Matrix RE-Fe Giant Magnetostrictive Composite

Polymer matrix RE-Fe giant magnetostrictire composite （GMPC） was prepared using bonding and magnetic field forming technique, and magnetostriction of samples was measured for different compressive stress. The experimental results show thai there is certain compressive effect in GMPC. And the influence of compressive stress on magnetostriction of sample was investigated. It offers essential reference for application and device design of GMPC.     

Average consensus in networks of dynamic agents with switching topologies and multiple time-varying delays

In this paper, we discuss average consensus problem in undirected networks of dynamic agents with fixed and switching topologies as well as multiple time-varying communication delays. By employing a linear matrix inequality method, we prove that all the nodes in the network achieve average consensus asymptotically for appropriate communication delays if the network topology is connected. Particularly, several feasible linear matrix inequalities are established to determine the maximal allowable upper bound of time-varying communication delays. Numerical examples are given to demonstrate the effectiveness and the sharpness of the theoretical results.     

A parallel and scalable algorithm for ADI method with pre-propagation and message vectorization

It is hard to implement the ADI method in an efficient way on distributed-memory parallel computers. We propose “P-scheme” which parallelizes a tridiagonal linear system of equations for the ADI method, but its effectiveness is limited to the cases where the problem size is large enough mainly because of the communication cost of the propagation phase of the scheme.

In order to overcome this difficulty, we propose an improved version of the P-scheme with “message vectorization” which aggregates several communication messages into one and alleviates the communication cost. Also we evaluate the effectiveness of message vectorization for the ADI method and show that the improved version of the P-scheme works well even for smaller problems and linear and super-linear speedups can be achieved for 8194 × 8194 and 16,386 × 16,386 problems, respectively.     

The effect of particle distribution on damage formation in particulate reinforced metal matrix composites deformed in compression

Image analysis results are reported on the generation of damage in particulate reinforced metal matrix composites during compressive deformation. The technique allows the automated collection of data on the incidence of particle fracture and void formation in the matrix as a function of important microstructural parameters such as local particle volume fraction and particle size. There is a strong relationship between damage and the local volume fraction of the reinforcement proving that damage formation is accentuated in regions of particle clustering. With the SiC reinforced materials examined, there was observed to be a change in dominance of damage mechanism from particle fracture at low local volume fractions to void formation in the matrix within strongly clustered regions. The results are compared with finite element (FE) modelling of the compressive deformation of clustered particles using a simple cluster of equi-spaced particles. The FE results suggest that plastic flow is generally inhibited in clustered regions. In certain highly clustered configurations shielding is such that flow does not occur in the heart of the cluster even at high levels of average plastic strain. The modelling suggests that the change in dominance of damage mechanism is related to the dramatic increase in tensile hydrostatic stresses in the matrix with higher levels of particle clustering.     

The rank one mixed μ problem and ‘kharitonov-type’ analysis

The general mixed μ problem has been shown to be NP hard, so that the exact solution of the general problem is computationally intractable, except for small problems. In this paper we consider not the general problem, but a particular special case of this problem, the rank one mixed μ problem. We show that for this case the mixed μ problem is equivalent to its upper bound (which is convex), and it can in fact be computed easily (and exactly). This special case is shown to be equivalent to the so-called ‘affine parameter variation’ problem (for a polynomial with perturbed coefficients) which has been examined in detail in the literature, and for which several celebrated ‘Kharitonov-type’ results have been proven.     

内蒙古煤系高岭土作为FCC催化剂基质的研究

研究两种内蒙古煤系高岭土（1^＃、2^＃）的化学组成、晶体结构并与苏州高岭土进行了比较。对三种高岭土进行酸改性，利用BET、吡啶-TPD和微反测试分别研究改性前后高岭土的性能特点。并将内蒙古高岭土1^＃与苏州高岭土采用半合成方法合成了FCC催化剂，测定了其裂化活性。研究结果表明，内蒙古1^＃具有较良好的晶体结构和化学组成，经酸改性后比表面积大大增加，具有合适的孔径分布，裂化活性较好，可以取代苏州高岭土作为FCC催化剂的基质。     

SiCf/SiC陶瓷复合材料的研究进展

SiCf/SiC陶瓷复合材料具有良好的力学性能、高温抗氧化性和化学稳定性，是航空航天和原子能等领域理想的新一代高温结构材料。本文概述了增强体SiCt的发展状况及存在的问题，对SiCt/SiC材料的制备工艺、界面相的研究状态、材料的损伤破坏机理和目前的应用研究进展做了综述，并分析了SiCf/SiC陶瓷复合材料的研究重点和发展前景。     

Autolisp在开发V画面体视图自生成系统中的应用

介绍了近年来体视投影技术的应用及发展，并提出了用AutoCAD的内嵌开发工具Autolisp语言结合Visualisp中的对话框控制语言DCL来开发体视图自动生成系统的新思路．根据V画面体视投影原理，推导出了V画面体视变换矩阵．给出了该系统的程序流程框图及相应的功能模块．并将该系统的界面和基本功能进行了展示，从而为体视自生成技术的研究开辟了新的道路．     

SiC颗粒增强铝基复合材料切削表面分形维数及其与抗磨损性能的关系

做为一种耐磨性能很好的材料 ,SiC颗粒增强铝基复合材料切削加工表面具有分形特征。实际研究表明SiC颗粒增强铝基复合材料切削加工表面分形维数与抗磨损性能有密切关系 ,本文还分析了表面分形维数越大其抗磨损性能越强的机理。     

Equivalent Conditions for Convergence of Splittings of Non-Hermitian Indefinite Matrices

We present some sufficient and necessary conditions for convergent splitting of a non-Hermitian indefinite matrix. Some sufficient conditions to determinate a matrix with a (strongly) dominant symmetric part for a class of boundary value problem are also obtained. These results are applicable to identify the convergence of iterative methods for solving large sparse systems of linear equations.