PTA装置中冷凝器壳体腐蚀原因分析及防护对策

对仪征化纤化工厂PTA装置中反应器第一冷凝器E-112 壳体腐蚀状况进行了分析.结果表明，高温高压冷凝液的冲刷是造成E-112壳体腐蚀穿孔的 主要原因，并提出相应防护对策.     

New inverse method for identification of constitutive parameters

A new inverse method by coupling iSIGHT and ABAQUS was proposed to determine the constitutive parameters of Al2O3sf/LY12 composite deforming at elevated temperature. It combined the merits of the f＇mite element simulation and optimization technique. The direct model was simulated with finite element code ABAQUS. The inverse problem associated with the identification of the constitutive parameters was expressed as a least square optimization problem. The direct simulation and the parameters optimization were implemented in iSIGHT integrated environment. The aim was to match the output of the direct simulation with the experiment data. The capability of the proposed inverse method was demonstrated through the identification of constitutive parameters of Al2O3sf/LY12 composite. The proposed new inverse method is also applicable to other parameters identification which is hardly determined through experiments or direct analytical method.     

人工智能在冷轧带肋钢筋工艺参数优化中的应用

论述了人工智能在冷轧带肋钢筋工艺参数优化中的应用,首先利用神经网络建立起冷轧带肋钢筋工艺参数与产品抗拉强度之间关系的数学模型,然后用遗传算法对工艺参数优化。按优化后的工艺参数在某拉丝加工厂进行了大批量生产试验,产品的合格率达到98%以上,从而为控制冷轧带肋钢筋工艺参数提供了一条行之有效的途径。     

大型钛合金压气机盘超塑性等温锻造模具结构及工艺参数实验研究

通过超塑拉伸和压缩试验，用金属铅进行模拟实验，探讨了大型ＴＣ１１合金压气机盘超塑性等温锻造的工艺参数，模具结构，锻坯形状尺寸及润滑剂的选择、并讨论了其模具材料及加热方式的选择。     

磁性纤维随机混合媒质等效电磁参数的计算

为计及强散射偶极子间的相互作用,引入参量εh和μh,利用广义多重散射理论及MATLAB计算机软件对在2 GHz～18 GHz频率下的体积占空比为8%的铁纤维随机混合媒质等效磁导率的实验值进行曲线的拟合,导出了耦合系数εh和μh,并在此基础上,对体积占空比分别为30%和20%的铁纤维随机混合媒质等效磁导率进行了计算,计算结果与实验吻合良好.     

基于人工智能的钛合金热变形工艺参数优化

在深入分析热变形工艺参数对Ti-15-3合金显微组织及成形载荷的影响的基础上,以变形温度、变形程度和变形速率等热变形工艺参数作为设计变量,以显微组织和成形力的最佳综合为目标,建立了该合金热塑性成形工艺参数的多目标优化数学模型。以显微组织参数和成形力的人工神经网络预测模型作为优化算法的知识源,将人工神经网络与修正的遗传算法相结合,对Ti-15-3合金的热塑性成形工艺参数进行优化。结果表明,提出的修正的遗传算法是有效的,采用将其与人工神经网络相结合的方法对钛合金的热塑性成形工艺参数进行优化是可行的。     

共轨喷油器参数优化研究

现代柴油机采用共轨喷油器已经成为其必不可少的环节,对共轨喷油器的工作特性研究具有重要意义。通过对共轨喷油器的主要结构进行数学建模,得出影响喷油器喷油特性和泄漏特性的结构参数。利用AMESim软件对共轨喷油器的工作过程进行仿真分析,得出单个结构参数对喷油率和泄漏量的影响,由此选择合理范围的结构参数进行正交试验,选用综合平衡法对指标进行评价。得出最优结构参数,优化方案在提高喷油器喷油率以及降低泄漏方面有明显的效果。     

基于CAE技术的汽车前保险杠成型工艺优化研究

介绍了利用CAE技术优化汽车保险杠的浇口设置,在优化方案的基础上,结合经验设计冷却系统,通过正交试验的方式确定保险杠成型工艺参数对翘曲变形的影响程度,得出最佳的工艺参数组合,用以指导生产实践。     

Influence of process parameters on thermal-rate treatment of ZA42 alloy

Sand casting process and directional solidification technique combining thermal-rate treatment(TRT) were used. The influence of process parameters on TRT was investigated according to the values of impact toughness. At the same time, the mechanism of TRT was discussed. The results showed that TRT can improve the impact toughness of this alloy, while the hardness is basically constant. The time of heat preservation should not be more than 5min. Different forms of cooling intensification additive have different effects among which the zinc ingot solidified in graphite mold is the best one that can improve impact toughness of samples by more than 80%. With increasing the cooling temperature, the value of α(Al) crystal lattice constant increases. The element Sb has negative effect on TRT.     

B113－2型低汽／气比CO高温变换催化剂的研制

介绍了Ｂ１１３－２Ｍ低汽／气比ＣＯ高温变换催化剂的研制方法及其特点．实验室测试表明，Ｂ１１３－２型催化剂具有堆密度低、运行强度高、选择性好、抗沸水性能优、本体含硫低及低温活性好等优点．