方盒形带凸缘件的板料形状优化设计

本文用大变形刚塑性有限元模拟正方形板料在方冲头拉延下的凸缘变形过程，并以所获得的工件形状与金属流动方向为依据，对初始板料形状进行修正。对修正后的坯料形状进行二次模拟，获得了与给定凸缘形状基本吻合的拉延件形状。文中对不同凸缘圆角对极料优化形状的影响作了计算，讨论了在保证边界轮廓位置不变的条件下网格划分的方法。     

薄板坯表面变形实验分析

对连铸薄板坯的坯壳表面变形的物理模拟实验方法进行了分析,提出一种"铜裹铅双金属"新实验方案,并对坯壳表面弯曲变形进行了分析.     

竹坑水库大坝安全鉴定分析

在竹坑水库大坝安全鉴定中,认真分析了该工程存在的主要问题,并针对大坝的结构稳定和渗流稳定作了详细的分析论证.     

Energy absorption in splitting square metal tubes

This paper presents an investigation into the energy absorbing behaviour of axially splitting square metal tubes. Tubes 50 mm square with a variable thickness were pushed slowly against rigid pyramid shaped dies, which had various semi-angles. By pre-cutting 5 mm long slits at the four corners, the tube splits along the corners and curls outward with a certain radius at a constant force. In this energy dissipating system, there are three components: tearing energy, plastic deformation energy and frictional energy. Theoretical analysis of the three energy components is presented. Curl radius is also studied in detail. Good agreement between experiments and theory is obtained. The results show that tubes which both split and curl may be used as efficient, long stroke energy absorbing devices.     

Defect structure of gold introduced by high-speed deformation

The effect of deformation speed on defect structures introduced into bulk gold specimens at 298 K has been investigated systematically over a wide range of strain rate from ′=10⁻² to 10⁶ s⁻¹. As strain rate increased, dislocation structure changed from heterogeneous distribution, so-called cell structure, to random distribution. Also, stacking fault tetrahedra (SFTs) were produced at anomalously high density by deformation at high strain rate. The anomalous production of SFTs observed at high strain rate is consistent with the characteristic microstructure induced by dislocation-free plastic deformation, which has been recently reported in deformation of gold thin foils. Thus, the results of the present study indicate that high-speed deformation induces an abnormal mechanism of plastic deformation, which falls beyond the scope of dislocation theory. Numerical analysis of dislocation structure and SFTs revealed that the transition point of variation of deformation mode is around the strain rate of 10³ s⁻¹.     

紧凑式轧机变形规程优化设计

本文从紧凑式轧机的轧制变形特点出发,分析了其变形规程设计的主要特点和方法,讨论了限制其道次变形量的基本因素,给出了优化设计的目标函数和约束条件。指出,类似这种具有复杂约束的轧制变形问题采用混合罚函数法处理更为有效,并成功地采用该方法进行了变形规程的试设定。     

底支承对小口径反射镜镜面变形的影响

论述了运用有限元技术研究镜面变形的方法及分析底支承在不同口径，焦比、厚径比和相对支承半径时镜面变形的技术；在取得的相互关联的最大镜面变形数据基础上，研究了影响小口径反射镜底支承镜面变形的因素。     

Q195冷轧板材轧制困难原因分析

针对部分Q195冷轧板材存在轧制困难的现象，进行了现场检验与分析。带状组织、混晶现象严重导致变形强化系数偏高是造成轧制困难的主要原因。     

橡胶Mooney—Rivlin模型材料系数对轴向刚度影响分析

在橡胶小变形范围内，采用理论推断的方法，得到在相同硬度下橡胶Mooney—Rivlin模型材料系数由C2／C1决定的关系式。并采用ABAQUS有限元软件分析的方法，结合橡胶轴向刚度常规解，分析了C2／C1不同值对橡胶轴向刚度的影响进行，结果显示其影响呈现一定规律性。