Towards thinner and low bowing silicon solar cells: form the boron and aluminum co‐doped back surface field with thinner metallization film

Using thinner wafers can largely reduce the cost of silicon solar cells. One obstacle of using thinner wafers is that few methods can provide good dopant concentration for the back surface field (BSF) and good ohmic contact while generated only in low bowing. In this paper, we have demonstrated the screening–printing B and Al (B/Al) mixture metallization film technique, making use of the screen‐printing technique and the higher solubility of B in silicon to form a B/Al‐BSF. This technique can raise the carrier concentration in the BSF by more than one order of magnitude and reduce the back surface recombination at a low firing temperature (≤800 °C). We have also shown that through the new technique, the metallization paste thickness at the rear could be reduced largely, which however did not degrade the solar cell efficiency. All these efforts are aiming for pushing forward the application of thinner wafers. Copyright © 2011 John Wiley & Sons, Ltd.     

A lightweight,self‐adaptive lock gate designation scheme for data collection in long‐thin wireless sensor networks

Constrained by the physical environments, the long‐thin topology has recently been promoted for many practical deployments of wireless sensor networks (WSNs). In general, a long‐thin topology is composed of a number of long branches of sensor nodes, where along a branch each sensor node has only one potential parent node toward the sink node. Although data aggregation may alleviate excessive packet contention, the maximum payload size of a packet and the dynamically changing traffic loads may severely affect the amount of sensor readings that may be collected along a long branch of sensor nodes. In addition, many practical applications of long‐thin WSNs demand the exact sensor readings at each location along the deployment areas for monitoring and analysis purposes, so sensor readings may not be aggregated when they are collected. This paper proposes a lightweight, self‐adaptive scheme that designates multiple collection nodes, termed lock gates, along a long‐thin network to collect sensor readings sent from their respective upstream sensor nodes. The self‐adaptive lock gate designation scheme balances between the responsiveness and the congestion of data collection while mitigating the funneling effect. The scheme also dynamically adapts the designation of lock gates to accommodate the time‐varying sensor reading generation rates of different sensor nodes. A testbed of 100 Jennic sensor nodes is developed to demonstrate the effectiveness of the proposed lock gate designation scheme. Copyright © 2011 John Wiley & Sons, Ltd.     

Performance analysis and power allocation for decode‐and‐forward cooperative communications over Rician fading channel

This paper derives the asymptotic symbol error rate (SER) and outage probability of decode‐and‐forward (DF) cooperative communications over Rician fading channels. How to optimally allocate the total power is also addressed when the performance metric in terms of SER or outage probability is taken into consideration. Analysis reveals the insights that Rician factor has a great impact on the system performance as compared with the channel variance, and the relay–destination channel quality is of importance. In addition, the source–relay channel condition is irrelevant to the optimal power allocation design. Simulation and numerical evaluation substantiate the tightness of the asymptotic expressions in the high‐SNR regions and demonstrate the accuracy of our theoretical analysis. Copyright © 2011 John Wiley & Sons, Ltd.     

Tunable Assembly of sp3 Cross‐Linked 3D Graphene Monoliths: A First‐Principles Prediction

One of the biggest challenges in graphene applications is how one can fabricate 3D architectures comprising graphene sheets in which the resulting architectures have inherited graphene's excellent intrinsic properties but have overcome its shortcomings. Two series of 3D graphene monoliths (GMs) using zigzag or armchair graphene nanoribbons as building blocks and sp³ carbon chains as junction nodes are constructued, and calculations based on first principles are performed in order to predict their mechanical and electronic properties. The perfect match between sp² nanoribbons and sp³ linkers results in favorable energy and mechanical/dynamic stability. Owing to their tailored motifs, wine‐rack‐like pores, and rigid sp³ linkers, these GMs possess high surface areas, appreciable mechanical strength, and tunable band gaps. Negative linear compressibilities in a wide range are found for the zigzag GMs. By solving the problems of zero gap and dimensionality of graphene sheets simultaneously, these GMs offer a viable strategy towards many applications, e.g., microelectronic devices, energy storage, molecular sieves, sensitive pressure detectors, and telecommunication line systems.     

Antenna array techniques for nonuniform cell zooming and adaptive frequency planning

This paper proposes the antenna array system and the techniques for the nonuniform cell zooming and adaptive frequency planning which is suitable for the energy‐efficient LTE network and multitier 5G heterogeneous network. The antenna array system is designed for the beam width control and scan control in the azimuth plane. The beam tilt is controlled in the elevation plane to control the cell radius. The first feature of the antenna array system is to perform nonuniform sector size control in order to deal with the nonuniform traffic distribution. The second feature of the antenna array system is to control the beam scan in the azimuth plane for the adaptive frequency planning. The footprint control of the current work is evaluated considering the antenna array's radiation pattern and all the physical parameters. Adaptive frequency planning can mitigate cochannel interference (CCI), which may be caused due to the cell zooming techniques proposed in this work. The footprint simulations confirm that the antenna array system can control the sector size with the highest possible flexibility. The antenna array system due to these features can effectively mitigate the interference. The results also confirm that the current antenna array system outperforms the existing antenna array systems.     

Computationally efficient variational Bayesian method for PAPR reduction in multiuser MIMO‐OFDM systems

This paper investigates the use of the inverse‐free sparse Bayesian learning (SBL) approach for peak‐to‐average power ratio (PAPR) reduction in orthogonal frequency‐division multiplexing (OFDM)‐based multiuser massive multiple‐input multiple‐output (MIMO) systems. The Bayesian inference method employs a truncated Gaussian mixture prior for the sought‐after low‐PAPR signal. To learn the prior signal, associated hyperparameters and underlying statistical parameters, we use the variational expectation‐maximization (EM) iterative algorithm. The matrix inversion involved in the expectation step (E‐step) is averted by invoking a relaxed evidence lower bound (relaxed‐ELBO). The resulting inverse‐free SBL algorithm has a much lower complexity than the standard SBL algorithm. Numerical experiments confirm the substantial improvement over existing methods in terms of PAPR reduction for different MIMO configurations.     

Analysis of adjacent channel interference using distribution function for V2X communication systems in the 5.9‐GHz band for ITS

Many use cases have been presented on providing convenience and safety for vehicles employing wireless access in vehicular environments and long‐term evolution communication technologies. As the 70‐MHz bandwidth in the 5.9‐GHz band is allocated as an intelligent transportation system (ITS) service, there exists the issue that vehicular communication systems should not interfere with each other during their usage. Numerous studies have been conducted on adjacent interfering channels, but there is insufficient research on vehicular communication systems in the ITS band. In this paper, we analyze the interference channel performance between communication systems using distribution functions. Two types of scenarios comprising adjacent channel interference are defined. In each scenario, a combination of an aggressor and victim network is categorized into four test cases. The minimum requirements and conditions to meet a 10% packet error rate are analyzed in terms of outage probability, packet error rate, and throughput for different transmission rates. This paper presents an adjacent channel interference ratio and communication coverage to obtain a satisfactory performance.     

A Room‐Temperature High‐Conductivity Metal Printing Paradigm with Visible‐Light Projection Lithography

Fabricating electronic devices require integrating metallic conductors and polymeric insulators in complex structures. Current metal‐patterning methods such as evaporation and laser sintering require vacuum, multistep processes, and high temperature during sintering or postannealing to achieve desirable electrical conductivity, which damages low‐temperature polymer substrates. Here reports a facile ecofriendly room‐temperature metal printing paradigm using visible‐light projection lithography. With a particle‐free reactive silver ink, photoinduced redox reaction occurs to form metallic silver within designed illuminated regions through a digital mask on substrate with insignificant temperature change (<4 °C). The patterns exhibit remarkably high conductivity achievable at room temperature (2.4 × 10⁷ S m^?1, ≈40% of bulk silver conductivity) after simple room‐temperature chemical annealing for 1–2 s. The finest silver trace produced reaches 15 µm. Neither extra thermal energy input nor physical mask is required for the entire fabrication process. Metal patterns were printed on various substrates, including polyethylene terephthalate, polydimethylsiloxane, polyimide, Scotch tape, print paper, Si wafer, glass coverslip, and polystyrene. By changing inks, this paradigm can be extended to print various metals and metal–polymer hybrid structures. This method greatly simplifies the metal‐patterning process and expands printability and substrate materials, showing huge potential in fabricating microelectronics with one system.