硫化氢制酸的生产技术进展

根据近年的文献报道，评述了硫化氢制酸的生产技术近况。内容包括硫化氢制成硫磺然后再生产硫酸，以及以硫化氢为原料直接制得硫酸。主要从工艺过程、二氧化硫回收率及产品硫酸的浓度等方面加以归纳和概述。通过比较分析得出，湿气制酸（WAX）工艺无论从工艺生产流程，还是二氧化硫转化率、能耗、操作费用和余热回收率等方面都有其独到之处，值得借鉴和引进推广。     

Effect of temperature on activity and selectivity of carbon supported Mo sulfide in simultaneous hydrodenitrogenation of pyridine and hydrodesulfurization of thiophene

Activity and selectivity of carbon supported Mo catalyst was tested in parallel hydrodenitrogenation (HDN) of pyridine and hydrodesulfurization (HDS) of thiophene in the temperature range 260–350 °C at 2 MPa of hydrogen pressure and compared with that of commercial NiMo-alumina catalyst Shell 324. The main advantages of carbon supported Mo sulfide over commercial NiMo catalyst can be summarized as follows: the markedly higher HDN and better HDS activities normalized to moles of active metals, the lower content of piperidine in the reaction products and the distinctly better selectivity towards HDN reaction.     

纳米尺寸硫化镍化学增感剂

本文发现了硫化镍纳米粒子对卤化银乳剂的化学增感作用，采用水不溶性的硫化镍纳米粒子作为化学增感剂，与水溶性的硫代硫酸钠增感剂相比，可以在乳剂灰雾增加不大的条件下明显提高乳剂的感光度和反差。     

Pyrolysed carbon supported cobalt porphyrin: a potent catalyst for oxidation of hydrogen sulfide

Pyrolysed carbon supported cobalt porphyrin, an electrocatalyst that is frequently used for oxygen reduction in fuel cells, is evaluated for catalytic oxidation of hydrogen sulfide by dissolved dioxygen. The catalyst performs best after heat treatment at 880 °C_, at pH 8. Analysis of the reaction products reveals that sulfur is the dominant product throughout the investigated pH range 5–10. The catalyst performs much better than powdered activated carbon, granular activated carbon and different other forms of unmodified carbon catalysts. This is as far as we know the first time that heat treated cobalt porphyrins are evaluated for non-electrocatalytic applications.     

Na2S-SO2反应体系中H2S产生的过饱和态分析

向Na2S溶液中通入低浓度SO2气体以生成H2S，H2S从液相中逸出时，存在一突跃现象。本文根据这一现象，结合Y．T．Shah等提出的吸收－反应－解吸体系中过饱和态存在的条件，通过理论分析，得出在Na2S-SO2-H2S4反应体系中H2S解吸存在过饱和现象。     

PPS的共混改性

简要介绍了聚苯硫醚(PPS)与其他聚合物进行共混改性的研究进展。着重讨论了PPS PA66、PPS PC、PPS PPO等的共混及其性能。此外,展望了PPS合金的发展前景。     

混炼硅橡胶的配合技术(一)

介绍了混炼硅橡胶的基本配合过程和硫化体系,着重比较了间歇法和连续法两种混炼工艺的生产效率及对硅橡胶硫化胶性能的影响,讨论了6种过氧化物硫化剂的特点及适应范围。     

三苯基膦合成工艺改进

采用弗 克法 ,以苯 ,三氯化磷 ,硫磺直接回流反应 ,生成三苯基硫膦 ,再经锌粉还原制得三苯基膦。其中采用不分离出三苯基硫膦以及用锌粉作还原剂等新工艺。该法具有收率高 ,产品纯 ,反应条件缓和等特点。     

Preparation of zinc ferrite in the presence of carbon material and its application to hot-gas cleaning

In order to develop an efficient absorbent of H₂S in coal gasification, zinc ferrite (ZnFe₂O₄) was prepared in the presence of carbon materials such as activated carbon (AC), activated carbon fiber (ACF), and Yallourn coal (YL). The absorption behavior of absorbents for H₂S was examined using a fixed-bed flow type reactor equipped with a quadrupole mass spectrometer.Carbon material-supported ZnFe₂O₄ exhibited larger desulfurization capacity for H₂S than unsupported ferrites. They could efficiently remove H₂S from 4000 ppm levels in a simulated coal gasification gas to less than 1 ppm at 500 °C. The absorption capacity of H₂S with ZnFe₂O₄/AC, ZnFe₂O₄/ACF, and ZnFe₂O₄/YL exhibited nearly 100% of stoichiometric amount of loaded metal species. They could be regenerated by an air oxidation in O₂-Ar (50 vol%) at 450 °C for 30 min. The regenerated ferrite can be used for repeated absorption of H₂S with a very slight decrease in the absorption capacity.     

聚苯硫醚/聚四氟乙烯复合材料的研究

制备并研究了PPS/PTFE合金的热行为、力学性能以及摩擦学性能,并对其微观形态进行了观察。实验结果表明,此合金的耐热性能相对于聚苯硫醚纯树脂有明显的提高,而且聚四氟乙烯的加入可以改善聚苯硫醚的力学性能及摩擦磨损性能。