CO2腐蚀的神经网络分析

利用神经网络的分析方法 ,对CO2 腐蚀进行分析建模 ,从系统的观点出发 ,建立了碳钢含碳量、CO2 分压、温度、流速与腐蚀速率之间的非线性对应关系 ,为准确的数学建模、预测设备的使用寿命和相关专家系统的研制开拓了新的思路     

稳定态二氧化氯杀菌剂的制备及应用

稳定态二氧化氯(C1O2)是一新型杀菌消毒剂，具有高效、广谱、安全的特性，适用范围广，不产生对人体有害物质。介绍了稳定态ClO2的性质、检测、制备条件及其在有关领域的应用。     

Kinetics of the Initial Stage of Sintering from Shrinkage Data: Simultaneous Determination of Activation Energy and Kinetic Model from a Single Nonisothermal Experiment

A new method for the kinetic analysis of the initial stage of sintering for constant-heating-rate data has been proposed. Unlike all of the methods previously reported in the literature, this new method proposed here allows the simultaneous determination of the activation energy and the kinetic model from a single dilatometric curve recorded under a linear-heating-rate program. The proposed method has been tested with simulated sintering curves and experimental results have been obtained for the sintering of a rutile sample.     

复合高稳定性固态二氧化氯释放剂的研究

目前中国市场上固态二氧化氯释放剂技术不成熟，产品多为二元包装或伪一元包装，给使用和储存带来很多不便。为解决这个问题，采取亚氯酸钠为释放剂主成分，辅以复合无机盐活化剂，借助小丸包衣技术，制备了一元化、高纯、高稳定性固态二氧化氯释放剂。     

由二氧化碳出发合成有机碳酸酯

对以二氧化碳为原料合成有机碳酸酯的环氧路线、酯交换和直接合成方法作了综合评述 ,认为直接合成是最佳的合成路线。碳酸酯的直接合成可在均相及多相催化体系中进行 ,负载金属、金属甲氧基化合物及碱均可作为催化剂。直接法研究的关键在于高性能催化剂的开发、由二氧化碳对金属 -氧键插入反应导致的催化循环的构筑及耦合反应的应用。     

ABSORPTION OF CO2 INTO AQUEOUS SOLUTIONS OF STERICALLY HINDERED METHYL AMINOETHANOL USING A HYDROPHOBIC MICROPOROUS HOLLOW FIBER CONTAINED CONTACTOR

The absorption of dilute CO₂ into aqueous solutions of sterically hindered 2-methyl aminoethanol (MAE) and the desorption of CO₂ from CO₂-loaded MAE solutions into N₂ stream were investigated separately for the various combinations of operational variables, using a hydrophobic microporous hollow fiber (polytetrafluoroethylene, PTFE) contained gas-liquid contactor with aqueous solutions of MAE as liquid media in the shell side at 30°C. The absorption of CO₂ in this contactor is governed by resistance in the liquid and hollow fiber phases. The resistance to diffusion in the hollow fiber phase amounts to 76-80% of the total resistance. Nevertheless, the absorption rates of CO₂ into aqueous MAE solutions in this contactor are higher than those into aqueous solutions of sterically hindered 2-amino-2-methyl-1-propanol (AMP) in the stirred tank with a plane unbroken gas-liquid interface. The process of desorption of CO₂ from CO₂-loaded MAE solutions can be regarded as being controlled by diffusion and chemical reaction in both the stagnant film of the liquid phase and the liquid-filled pore of the hollow fiber phase under the slow or intermediate reaction regime. Both absorption and desorption rates under the simultaneous absorption-desorption operation in a single unit tend to approach the respective constant values as process time elapses. The total absorption rate here seems to be almost balanced with the total desorpion rate at the constant mass transfer rate periods.     

碱式碳酸铅的生产工艺研究

介绍了由氧化铅与冰醋酸在一定温度下反应生成碱式醋酸铅，碱式醋酸铅在一定条件下与二氧化碳反应生成碱式碳酸铅，再经沉淀、抽滤，制得结晶产品。探讨了溶液pH、反应温度、二氧化碳流量、水中的杂质、总铅质量分数等对碱式碳酸铅结晶的影响，得出了制备碱式碳酸铅的最佳工艺条件：pH=6．5时停止通入二氧化碳，反应温度25～30℃，二氧化碳流量控制在0．5～3L／min，把河水或自来水经过离子交换处理，溶液中总铅质量分数控制在2％～5％。     

陶瓷热压铸成型的超临界CO2流体脱蜡

利用超临界CO2流体萃取技术从陶瓷热压铸成型坯体中萃取有机粘合剂。对陶瓷热压铸成型中所使用的有机载体组分进行研究，对陶瓷热压铸成型超临界CO2流体脱蜡工艺条件进行了探索。研究了陶瓷坯体厚度、萃取压力，温度及时间对萃取率和陶瓷坯体脱蜡质量的影响。结果表明：由60％(质量分数，下同)非极性分子石蜡(熔点57℃)和40％极性分子蜂蜡(熔点58℃)组成的混合蜡作为热压铸浆料的有机载体，在压力为30MPa，温度为45℃的超临界CO2流体中脱脂可获得无缺陷的陶瓷热压铸成型生坯，脱蜡时间从34h减少到3h。由超临界CO2流体脱蜡后烧成的陶瓷试件具有小的变形及高的致密度。     

大化肥煤代油CO耐硫变换工艺流程的设计

分析石脑油制氨装置改扩建为水煤浆制氨装置ＣＯ耐硫变换工艺的特点，具体阐述其工艺流程优化设计中需考虑的主要技术问题。     

多孔TiO2陶瓷光催化剂降解糠醛废水

以钛酸四丁酯等为原料，采用简单工艺制得多孔TiO2陶瓷光催化剂；并研究了利用多孔TiO2陶瓷光催化降解糠醛废水。结果表明，在紫外灯下照射60min，糖醛废水的COD去除率可达59．8％，而通入空气有利于污染物的去除。